Please quote for the following wholesale product requirement -
Product : KTA38 Engine For Construction Machine
Specifications:
Model:KTA38-C1200
Quantity Required : 1 Unit/Units
Shipping Terms : CIF
Destination Port : Uzbekistan, Uzbekistan
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Tair Israilov
Linoleum
Betel nut, black pepper, brazil nut, canola oil, cardamom, cashew nuts, almond nut, chestnut, chia seed, frozen chicken, chickpeas, compressor scrap, coriander, corn oil, soybeans oil, sunflower oil, dry dates, green mung, maize, rice, sugar, copper scrap, used engine oil
Please provide a quotation to the following requirement from importer -
Product Name: Washing Machine
Specifications :
Front Loading
Quantity Required : MOQ
Shipping Terms : EX-Factory
Destination Port : Uzbekistan
Payment Terms : OA/To be discussed with sellers
Looking for suppliers from : China
Contact : Johny
The buyer would like to receive quotations for -
Product Name: Graco Resin Spray Equipment Graco Equipment For Composite Materials
Specifications:
Maximum air inlet pressure: 7 bar, 0.7 MPa
Typical flow rate of pattern guns: Refer to RS Gun manual
A component (catalyst) inlet size: 3/8 in tube
B component (resin) inlet size: 1 5/16-12 UN-2A male
Wetted parts: Stainless steel, carbide, UHMWPE, PTFE, and acetal
Available: 9:1, 13:1 and 17:1 pump ratios
Advantage: Precision engineered linkage
UNIQUE SELLING POINT: IMPORRT HIGH QUALITY
Max. vertical conveying distance: 15M
Max. horizontal conveying distance: 100m
Hopper Capacity: 20L
Application: Fiberglass Resin Spraying Machine
Dimension(L*W*H): 0.5*0.5*0.5
Weight: 200
Power: 50KW
Core Components: Pressure vessel
Quantity Required : 1 Set/Sets
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Islombek Isayev
Used engine oil
Used engine oil
The buyer would like to receive quotations for -
Product: Spare Parts Of Kia And Hyundai Cars
Specifications:
Front Bumper Parts Of Kia Sorento Car
1. 29110p2500
2. 86577p2011
3. 86530p2010
Qty: 1 unit each later on 50 pcs or more
Quantity Required : 50 Piece/Pieces
Shipping Terms : CIf
Destination Port : Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Odil
Buyer is interested to receive quotations for the following RFQ -
Product: Lubricating Oils
Specifications:
Type: Engine Oil
For Cars And Bicycles
Quantity Required : 10 Ton/Tons
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : Bank transfer
Looking for suppliers from : Worldwide
Contact : Ziyidulla
Crusher, car parts, engine oil, computer parts
Manganese ore
Buyer is interested to receive quotations for the following RFQ -
Product Name: Synthetic Lubricating Motor Oil
Specifications :
SAE 50 API SN 0W40 5W40 5W50 15W50 10W40 15W40 20W50 Car Engine Oil
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Saidolim Mirzayev
Buyer is interested to receive quotations for the following RFQ -
Product Name: Synthetic Lubricating Motor Oil
Specifications :
SAE 50 API SN 0W40 5W40 5W50 15W50 10W40 15W40 20W50 Car Engine Oil
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : DAP Or CIP
Destination Port : Uzbekistan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Saidolim Mirzayev
Please provide a quotation to the following requirement from importer -
Product Name: HT22M Smartgen Water Heater Diesel Generator
Specifications:
Coolant heating system for diesel generators 15012 ED-S / TEDA SS with LPW4A27 engines
Quantity Required : 600 Piece/Pieces
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Shokhrukh Bozarbaev
Benzene, xylene, toluene, naphtha, methanol, kerosene, gas oil, white spirit, furnace oil, fuel oil, base oil (virgin & recycle), used engine oil, light diesel oil, crude oil, burner oil, light cycle oil, aromatics, pygas, caustic soda flakes, caustic soda lye , hydrochloric acid (HCL), sodium hypochlorite, calcium chloride anhydrous granules (cacl2) 94 97%, linear alkyl benzene sulphonic acid
Please provide a quotation to the following requirement from importer -
Product Name: Gas Compressor For A Gas Filling Station
Specifications:
gas compressor for a gas filling station.
Compressor unit SO-243 for gas filling station (OR ANALOGUE/ALTERNATIVE)
SECTION 2. SCOPE
The gas compressor must be used to drain liquefied petroleum gas from tank trucks / tank car into the tank and
pump gas from the tank to gas filling columns located in gas filling points.
SECTION 3 - OPERATING CONDITIONS
Subsection 3.1 General operating conditions
During operation, apply:
- Gas compressor in accordance with current regulations; Ambient temperature: - minus 10, + plus 55°
Subsection 3.2 Additional/special operating requirements
The operating mode of the gas compressor is continuous.
Service maintenance.
Warranty period: 12 months from the date of putting the equipment into operation.
Warranty obligations must cover all units and components of the supplied goods and, at the request of the
Customer, the replacement of the goods or the elimination of defects in the goods must be made within the time
agreed with the Customer and in accordance with the highest quality and safety standards.
SECTION 4. TECHNICAL REQUIREMENTS
Subsection 4.1 General technical requirements
Working environment - liquefied hydrocarbon gas in accordance with GOST 20448-90;
The device must be durable, sealed:
The body of the device should be manufactured in accordance with the current regulatory documents.
The following documentation must be attached to the
product • Operation manual in Russian or Uzbek;
• Certificate of conformity;
The technical characteristics of the supplied Compressor must be equal or superior in quality to the above
parameters.
And also the compressor must include, pressure gauges, a steel base (frame), a liquid separator according to
the standard. Provide flange accession of pipes . The requirements for the compressor must comply with the
requirements of the "Safety Rules in the Gas Industry of the Republic of Uzbekistan", approved by order of the
State Committee for Industrial Safety of the Republic of Uzbekistan "GOSKOMPROMBEZ" dated January 22,
2014. No. 13 (hereinafter - the Rules).
Subsection 4.2 Main technical, economic and operational indicators
The estimated service life is at least 10 years.
SECTION 13. REQUIREMENTS FOR THE QUANTITY, COMPOSITION, PLACE AND DATE
(FREQUENCY) OF DELIVERY
A gas compressor for LPG is subject to delivery, the total quantity is 1 set.
The completeness of the compressor is indicated in the technical documentation of the manufacturer (all
technical documentation is included in the delivery set).
Compressor SO-243-1 (SO-7V) is used when there is a need for compressed air in pneumatic systems ,
pneumatic equipment or pneumatic tools , during painting , painting, finishing works, in construction, in
production, mechanical engineering, industry and at home. It is perfect for working with paint sprayers,
spray guns and various pneumatic tools ( wrenches , balancers , pneumatic screwdrivers, pneumatic drills
, pneumatic saws , pneumatic machines, vibro- tampers , jackhammers, etc.) Compressor unit SO-243-1
(SO-7V) has a reliable and simple design. Ability to work both indoors and outdoors. Equipped with
wheels, which allows you to freely move the unit around the territory of enterprises, industrial zones ,
construction sites, etc.
Specifications
productivity, m 3 / hour 32
working pressure, kgf / cm 2 6
receiver volume, l 50
electric motor:
power, kWt four
voltage, V 380
N, rpm 2880
overall dimensions, mm
length (without handrail) 850X550X1000
weight, kg 132
Quantity Required : 1 Unit/Units
Shipping Terms : CIF
Destination Port : Uzbekistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Aleksandr Gafurov
