Please quote for the following wholesale product requirement -
Product Name: Steel Wire
Specifications :
Spec: 201 Wire In 1mm And 2mm Diameter
Quantity Required : 50 Kilogram/Kilograms
Shipping Terms : By Road
Destination Port : Philippines
Payment Terms : Bank Transfer
Looking for suppliers from : Philippines
Contact : Themistoklis Pyretzidis
Please provide a quotation to the following requirement from importer -
Product Name: Steel Coils
Quantity Required : 800 Ton/Tons
Shipping Terms : CIF
Destination Port : United Kingdom
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Sarabjit Singh
Buyer is interested to receive quotations for the following RFQ -
Product Name: Empty Steel Drums
Specifications :
Capacity: 210 Liters
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Papua New Guinea
Payment Terms : Bank Transfer
Looking for suppliers from : Papua New Guinea
Contact : Joanofarc
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Billets
Specifications :
Steel CC Grade Billets For Our Re-rolling Mill
Note: Test Reports And Pics Of Billets
Quantity Required : 1000 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Muhammad Razaq
The buyer would like to receive quotations for -
Product Name: Steel Billets
Specifications :
Size: Standard (Customized)
Will Use Only LC Payment Term No Other Payment Term
Quantity Required : 5000 - 10000 Ton/Tons
Shipping Terms : CIF
Destination Port : Singapore
Payment Terms : L/C Only
Looking for suppliers from : Worldwide
Contact : Michael Kwok
Buyer is interested to receive quotations for the following RFQ -
Product Name: PPGI Coils
Specifications :
520mm Wide*.45mm Thickness
Quantity Required : 28 Metric Ton/Metric Tons Monthly
Shipping Terms : CIF Or CFR
Destination Port : Oregon, United States
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Jack Davis
Please quote for the following wholesale product requirement -
Product : Secondary Hr Coils
Specifications:
1.2mm To 8 Mm .
To 1.6 Mm For Secondary Colour Coils 0.15mm To 1.6mm
As Per Moq
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Bangladesh, Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Faizan Jawad
Please quote for the following wholesale product requirement -
Product Name : HR Steel Coil
Specifications:
2 mm x 1220/1250 x SAE 1006 x 20 MT
Quantity Required : 20 tons for trial, later 100 mt
Quantity Required : 20 Ton/Tons(sample)
Shipping Terms : CIF
Destination Port : Pakistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Asif Aslam
The buyer would like to receive quotations for -
Product Name: ASTM GR60 A615 Steel Rebar
Specifications :
20 Feet Long
#3 (8) MM 250 Tons
#4 (10) MM 500 Tons
#5 (12) MM 250 Tons
40 Tons Of 15m, - 6 Meter
20 Tons Of 20 M - 12 Meter
20 Tons Of 10m - 6 Meter
20 Tons Of 25m - 12 Meter
20 Tons Of 30m - 12 Meter
Fill 40 Ft For 12 Mtr In Diagonal, And 6 Mtr In 20ft
Quantity Required : 20 Ton/Tons
Shipping Terms : CIF
Destination Port : Ontario Canada. Toronto Sea Port, Canada
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Victor
Please quote for the following wholesale product requirement -
Product Name: Steel Wire
Specifications :
Galvanized
Quantity Required : 100 Ton/Tons
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Danial Ahmed
Please quote for the following wholesale product requirement -
Product: Rejected Mild Steel Sheet
Specifications:
Quantity: 25 Tons
Quantity Required : 25 Ton/Tons
Shipping Terms : CIF
Destination Port : India
Payment Terms : 7-10 credit /Bank Transfer
Looking for suppliers from : Worldwide
Contact : Vishnu Rajput
Please provide a quotation to the following requirement from importer -
Product Name: Steel Billets
Specifications:
Qty: 200,000 Ton As A Monthly
Quantity Required : 200000 Ton/Tons
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Haitham Shedid
The buyer would like to receive quotations for -
Product Name: Steel Billets B500B/3SP
Specifications:
Qty : 200,000 MT monthly
Grade: B500B/3SP
Process of manufacture:
process route: EAF/BOF---LRF---CCM.
Input raw material: Hot DRI/HBI + Scrap + Internal virgin scrap(as and when required).
Killing practice: Silicon killed/Aluminum killed.
Metallurgical requirements:
Color code: As agreed before contract
Range: Min% - Max%
C 0.19 - 0.22 , Mn 0.65 - 0.80 , Si 0.15 0.30 , S 0.20 , P 0.035 , Cr 0.10 , Ni 0.10 , Cu 0.05 , Sn 0.015 , B 0.0008 , As 0.015 , Sb 0.01 , N2ppm 70
CE : 0.48 max (Aim 0.31-0.36)
CE= C+ Mn/6+ (Cr +Mo +V) /5+(Cu +Ni) /15
Permissible variation in analysis for individual chemical elements will be as per ASTM A29.
Internal soundness:
- One macros sample shall be checked for every 3 heats per sequence.
- Billet macrostructure should be appropriate to produce rolled product as per C2S2R2 ASTM E381.
- Free from harmful subsurface defects like blow / pin holes, and cracks which can affect the end product quality.
- Central looseness / piping: 4mm max.
- No visible defect (piping, pin holes, crack) should be on the cross section of both ends.
Surface Quality:
Billet shall be supplied free from harmful surface defects like longitudinal/transverse cracks, pinholes, slag patches, mechanical mark etc., which can affect surface quality of the end products, Mechanical/Scratch marks with a maximum depth of Less Than = 1mm depth are allowed, defect more than 1mm should be removed by smooth grinding and width of grinding and width of grinding and width of grinding and width of grinding should be at least 6 times of depth.
Size and dimensional tolerances:
Section in mm: 150*150 - 160*160
D1-D2 in mm (max) 10
Side Tol in mm +/-4
Length in meter 12
Length Tol in mm +/-50
Bulging 4 mm max
Bend in mm 5mm/m & 60mm in entire length, no end bend allowed
Ends Cut deviation 5mm max.
General :
- Billet ends will be Gas cut which should be straight.
- Burrs if present should not be more than 5 mm of thickness and 25 mm width
- Billet should be from current production and rust if present should be superficial
Certification:
The test certification will contain
- Supply condition
- Process of manufacturing
- Steel grade
- Heat number(cast number) , length, no of pieces and weight
- Chemical composition
- Declaration for free from radioactivity
Identification:
- Heat no./grade/length will be painted on one end of each billet with a specific color code Please let us know if there is any additional information you require from our end to proceed with this inquiry.
NO Parameters Unit Specs
1 T.Fe % 65.00 Min
2 SiO2 %
3 Al2O3 % 6.00 Max
4 CaO % 0.65 Typical
5 MgO % 0.04 Typical
6 P % 0.06 Max
7 S % 0.0040 Max
12 Moisture % 2.50 Max
21 Less Than 5.0 mm % 1.0 Max
22 T.I.(+6.3mm) % 94.0 Min
23 A.I.(-0.5mm) % 3.0 Max
24 CCS Kg/P 280 Min
26 Porosity % 23% Min
28 Mean Size mm 13 mm
Quantity Required : 200000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Oman
Payment Terms : L/C
Looking for suppliers from : Indonesia
Contact : Soheil Damaj
Please quote for the following wholesale product requirement -
Product Name: Deformed Steel Bars
Specifications :
Origin: Turkey
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Maldives
Payment Terms : T/T
Looking for suppliers from : Turkey, United Arab Emirates
Contact : Mohamed Mamdooh
The buyer would like to receive quotations for -
Product Name: Steel Coil
Specifications :
Specifications Will Be Shared Directly By The Buyer
Qty: 23 And A Half Tons In A 20'fcl Monthly
Quantity Required : 23.5 Ton/Tons
Shipping Terms : CIF
Destination Port : West Coast, United States
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Jack Davis
Please quote for the following wholesale product requirement -
Product Name: Steel Wires
Specifications :
0.7mm 410 Grade Pure Ss Wire
CBM 3.0
Quantity Required : 3 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Shoaib Sohail
The buyer would like to receive quotations for -
Product Name: Brass Plate
Specifications:
10 And 12mm
2.4 Mtrs Long
1 Mtr Wide
Quantity: Approx 4-5 Tonnes
Quantity Required : 4 - 5 Tonne/Tonnes
Shipping Terms : CIF
Destination Port : Australia
Payment Terms : Bank Transfer
Looking for suppliers from : India
Contact : Luke
Please quote for the following wholesale product requirement -
Product: Shredded Scrap Hs Code No :7204 4100
Specifications:
Qty: Minimum 500 Tons In A Month
Payment Terms: Lc
Qty: 5-10 Container Every Week
Note: Suppliers From Portugal Only Preferred
Quantity Required : 500 Ton/Tons
Shipping Terms : CNF
Destination Port : Ort Of Discharge, Karachi Port & Port Qasim, Pakistan
Payment Terms : L/C
Looking for suppliers from : Portugal
Contact : Zahid Hussain
Please quote for the following wholesale product requirement -
Product: Steel Shredded 211 Scrap
Specifications:
Origin UK / EU
Qty - 30,000 MT - SPOT
Please contact me personally with all details if anyone Selling or have Credible Seller.
Quantity Required : 30000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Mersin Port,, Turkey
Payment Terms : SBLC / DLC
Looking for suppliers from : Worldwide
Contact : -Suhaib Hasan Siddiqui
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Wire Ropes
Specifications :
Size: Standard (Customized)
Quantity: 1 Twenty-foot Container & Later 4 Twenty-foot Container
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Gdansk, Ukraine
Payment Terms : T/T - After Shipment
Looking for suppliers from : Worldwide
Contact : Oleg Semenchuk
