Cobalt hydroxide, cobalt ore, cobalt metal, copper concentrate, copper cathodes, copper ore, copper blister, copper slag, precious metals, lead ore, zinc concentrate, zinc ore, shg zinc metal, nmc film scrap, lico battery scrap, nico battery scrap, black mass, iron ore, manganese ore, steel scrap, steel and cast iron skulls, pig iron. sulphur granular, sulphur powder.
Steel Product.
Conductive Gre Pipe.
Brown mild steel ms pipe scrap
Steel bars,steel coils,steel plates,steel tubes,steel pipes,steel fittings
Cooking oil such as sunflower oil and mustard oil, jp54, mazut 100, d6, d2, urea, iron ore, steel billets, castings, forgings, coal, cement, clinker, coke, garments, wheat, sugar, yellow corn, rice, spices like pepper, lng, lpg, jaggery powder cube, maize, copper cathode, base oil and lubricants, hydraulic oil, industrial oil, engine oil, automotive oil, diesel, jet fuel, mazut, jet fuel a1, aviation kerosene colonial (grade 54), gas oil, gas oil 5000ppm up to 1%, fuel oil 380cst 280cst, bitumen, hms, rapeseed oil , crude oil , chemicals, fertilizer,dap, , en590, soybean, soybean oil, aluminium ingot, npk fertilizer
Carbon Steel Forged Sheets.
Steel Friction Rubberized Tire Cord.
The buyer would like to receive quotations for -
Product Name: Steel Sheets And Coils
Specifications :
Thickness-0.5mm
Form: Sheets, Coils, Rolls
Dimension: Customized
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Shuwaikh, Kuwait
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Asif
Crw steel tube
Please provide a quotation to the following requirement from importer -
Product Name: Carbon Steel Wire
Specifications:
Medium Carbon Steel Wire
Quantity required : 20 tons
Quantity Required : 20 - 24 Ton/Tons
Shipping Terms : CNF
Destination Port : Chittagong, Bangladesh
Payment Terms : 100% LC at sight
Looking for suppliers from : Worldwide
Contact : Zia
Please provide a quotation to the following requirement from importer -
Product Name: Steel Round Bars
Specifications :
Astm A322 4140 Grade 60 42Crmo4 Large Diameter 330Mm Forged Carbon Steel Round Bar
Quantity Required : 10 Ton/Tons
Shipping Terms : CIF
Destination Port : India
Payment Terms : T/T Or Bank Transfer
Looking for suppliers from : Worldwide
Contact : Jignesh Khunt
Buyer is interested to receive quotations for the following RFQ -
Product Name: Galvanized Steel Sheet
Specifications :
0.3mm Thick Galvanized Coated Steel Sheet Metal
Quantity Required : 5 - 10 Ton/Tons
Shipping Terms : CIF
Destination Port : Ireland
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Ronaldo Pavic
Buyer is interested to receive quotations for the following RFQ -
Product Name: CRGO Used Laminaton Sheet
Specifications:
Used CRGO THICKNESS required 0.30 / 0.27 / 0.23 / all sizesUNUSED CRGO 0.30 / 0.27 / 0.23 / COILS (with Test Certificate)
Quantity Required : 1000 Piece/Pieces
Shipping Terms : CIF
Destination Port : India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Abhishek Goenka
Please provide a quotation to the following requirement from importer -
Product Name: Carbon Steel Plate
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CNF
Destination Port : Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Saiful Islam
Please provide a quotation to the following requirement from importer -
Product : Steel Plate Carbon, Hot Rolled, Alloy
Specifications:
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 30,400 Kg.
ITEM # 2:
STEEL PLATE CARBON, HOT ROLLED, ALLOY
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 35,700 Kg.
SPECIAL CONDITIONS: To be followed by Shipper/Maker;
1. Same (Single) competitive Unit Rate must be quoted against the same tendered items.
2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored.
3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier,
4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f
commercial opening of tender (s) after acceptance of technical offers
5. Conditional offers are likely to be ignored.
6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it
must accompany technical quotation if requisite/relevant technical literature found
missing, quotation will be considered rejected.
7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However,
20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months
from final acceptance of store
21 Protocol of inspection will be followed as per inspection authorities.
Further requirements:
· Supplier type: manufacturer
35 tons approx
Quantity Required : 35 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan, Pakistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Rashid Akhtar
The buyer would like to receive quotations for -
Product Name: Galvanized Steel Rolls
Specifications:
Zinc Content:
60% - 100% zinc content
Coating:
Steel with polymer coating (different colors)
Steel without any coating
Metal Thickness:
Range from 0.1 mm to 0.5 mm
Qty: 5 contianers
Quantity Required : 5 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Other-Not Shown
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Ivan Avrin
Please quote for the following wholesale product requirement -
Product Name: Secondary Quality Ms Sheet
Specifications:
Thickness 0.70 Mm-0.90 Mm
Width 1250 Mm
Products Secondary Quality Cold Roll MS Sheets
Quantity: 200 tons
Quantity Required : 200 Ton/Tons
Shipping Terms : CFR
Destination Port : Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Md. Abu Sayed
Please quote for the following wholesale product requirement -
Product Name: Mild Steel Angle Bars
Specifications :
Quality: Grade A
Thickness: 25mm X 25mm X 3mm
Length: 6.0 Meter
Quantity Required : 15 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mariane Perez
Buyer is interested to receive quotations for the following RFQ -
Product Name: Mild Steel Angle Bars
Specifications :
Light
100mm X 50mm X 6mtr
Standard
100mm X 50mm X 6mtr
Quantity Required : 10 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Jebel Ali Port, United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mariane Perez
