Lead seal goti & g.i seal wire
Spark plugs, wire set
Washing brushes plastic handle,steel wire for scrubber
Steel wire, tyre crumb, tyre chips
Wire hangers, hangers, metal wire hangers, steel wire hangers
Binding wire
Steel Wire Rods,Wire Rods
Soldering Materials Like Solder Paste, Solder Wire/bar, Soldering Flux, Soldering Adhesive
Construction Hardware Rods, Pipes And Wires
Fabrics, metal steel, iron fittings. drainage pipes, flat sheets, plastic mold, steel wire
Tin plate and steel coils, steel wire
Gi wire, black annealed wire, common nails
Welded Wire Mesh, Galvanized & Bright Steel Wire
Galvanized steel wire, galvanized steel strand, PC wire, PC strand, oil temper steel wire, spiral rib steel wire, wire rope, iron wire, flat wire, stay wire
Wire rod coils s235jr, metal wires, steel wire, wire rod coils, wire rods
The buyer is interested to receive quotations for the following RFQ -
Product Name: Stay Wires
Specifications:
- 65 kN Stay Wires lengths on each drum shall be 200 Meters and all drums shall contain only one length
- 130 kN Stay Wires lengths on each drum shall be 100 Meters and all drums shall contain only one length
Quantity Required: Rated 65kN, 7/4mm, Stay Wire, suitable for OHL Network installations. With the ability of binding 180o by hand, QTY = 85 KM
Rated 130kN, 19/3.55mm, Stay Wire, suitable for OHL Network installations. With the ability to be bent 180o by hand, QTY = 30 KM
Quantity Required : 115 Kilometer/Kilometers(sample)
Shipping Terms : CFR
Destination Port : Aqaba Port, Jordan
Payment Terms : 100 % by irrevocable L/C as per IDECO payment terms
Looking for suppliers from : Worldwide
Contact : Said Alkam
Please quote for the following wholesale product requirement -
Product Name: Galvanized Zinc Coated Steel Tape, Wire And Sheet
Specifications :
Galvanized Steel Product
Non-customized Product
Sourcing Purpose: Corporate Consumption
Quantity Required : 135 Ton/Tons
Shipping Terms : Ex-Work
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Maksud Sayidov
Please provide a quotation to the following requirement from importer -
Product Name: Hot Rolled Wire Rebars
Specifications :
Standard - MSA EN 1992-1-1:2004 EN 10080:2005 Produced From Hot Rolled Wire With Properties Of B500C High Ductility Only Mesh Type D98 Is Produced From Cold Drawn Wire To BS 4483 B500A Mesh Reference C 5 0 3 B 5 0 3 Lw & Cw Thickness & Spacing Lw 8 X 100 Cw 5 X 350 Lw 8 X 100 Cw 8 X200 Weight Kg/sq.m 4.34 5.93 Order 1 For Rabat Site 4,000m2 of Mesh C 503. 16 Bundles T12 8 Bundles T16 8 Bundles T20 Order 2 for Siggiewi site 4,500m2 of Mesh B503 6 Bundles T10 6 Bundles T12 6 Bundles T16 And Rabat 3000sq.m B503
Quantity Required : 3000 Square Meter/Square Meters
Shipping Terms : CFR
Destination Port : Malta
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Tonio Magro
The buyer would like to receive quotations for -
Product Name: Steel Wire Rods
Specifications :
Material: Steel
Alloy or Not: Non Alloy
Technique: Hot Rolled Cold Rolled
Use: Cutting Steel, Construction
Process: Bending, Welding, Cutting
Surface: Black, Galvanized
Diameters: Customize
Quantity Required : 2000 Ton/Tons
Shipping Terms : CIF
Destination Port : Bangkok, Thailand
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Vichai
The buyer would like to receive quotations for -
Product Name: Steel Wire Rod
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
Quantity Required : 250 Ton/Tons
Shipping Terms : DAP
Destination Port : Baia Mare,
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
