Please provide a quotation to the following requirement from importer -
Product Name: Asphalt
Specifications:
Asphalt works for roads and plazas: supplying, spreading and laying a gravel layer of
crushed stone aggregate for the base layer, with a thickness of not less than 30 cm,
working in two stages, including leveling and preparing the surface of the roads or
plazas specified on the plans according to the tendencies shown in the plans,
including the pressure of the surface of the road or plazas.” Completely using the
appropriate mash to reach the maximum dry density of the soil (95%), compacting a
layer 20 cm thick below the ground level after leveling the full width to receive the
base layer, and compacting the base layer to reach the degree of compaction and
density required by the specifications, and it is charged to the item to carry out all
the required tests and compaction work, With the submission of executive plans
showing the levels, directions, and detailed sectors according to the rules, technical
qty: 14900 SQM
Please quote for the following wholesale product requirement -
Product Name: Bitumen
Specifications :
Grade 60/70
Produced In Compliance And Conformity To International Standards Such As AASHTO M20-70 & ASTM D946, aLso, Meets The Following Specification Requirements. The Specifications Of Our Bitumen Are As Followed In The Table Below.
Bitumen 60/70 Test Method Unit Specification
Specific gravity at 25°C ASTM D70 Kg/cm3 1.01/1.06
Penetration at 25°C ASTM D5mm/10 60/70
Softening Point °C ASTM D36 °C 49/56
Ductility at 25 °C ASTM D113cm 100 Min
Loss on Heating(wt) % ASTM D6 wt % 0.2 Max
Drop In Penetration After Heating % ASTM D5-D6% 20 Max
Flashpoint °C ASTM D92 °C 232 Min
Solubility in Trichloroethylene ASTM D2042 wt % 99 min
Spot Test A.A.S.H.O.T102 Negative
