The buyer would like to receive quotations for -
Product: Treated Mosquito Nets
Specifications:
Mosquito Net, Polyethylene
Material: (composition ISO1833) Polyethylene (PE) 100%
Fabrication: (construction ISO 8388) Warp knitted
Size: 180 x 160 x 150 cm
Denier: (ISO 2060, DUPRO) 100 - 150
Filament: Mono-filament
Netting mesh size: Min. 56 holes / inch2
Weight: Min. 38 g/m2, depending of denier
Shrinkage: (ISO 5077/ISO 6330 - 8A at 30 C, flat dry) +/- 5%
Bursting strength: (ISO13938-1 or ISO 13938-2): Min. 250 kPa for
net material and seams.
Fire safety: (16 CFR part 1610 ): Class 1
Color: Preferably white, blue or green
Treatment: Long lasting insecticide (3 to 5 years)
Insecticide: WHOPES recommended
Concentration of insecticide: WHOPES recommended
Target level of concentration: WHOPES recommended
Mosquito Net, POLYESTER
Material: (composition ISO1833) Polyester (PES) 100%
Fabrication: (construction ISO 8388) Warp knitted
Size: 180 x 160 x 150 cm
Denier: (ISO 2060, DUPRO) 75 - 100
Filament: Multi-filament 36 or higher
Netting mesh size: Min. 25 holes/cm2 (156 holes/inch2)
Weight: (ISO 3801) 30 or 40 gr/m2 depending of denier
Shrinkage: (ISO 5077/ISO 6330 - 8A at 30 C, flat dry) +/- 5%
Bursting strength: (ISO13938) 250 kPa minimum
Fire safety: (16 CFR part 1610 ): Class 1
Color: Preferably white, blue or green
Treatment: Long lasting insecticide (3 to 5 years)
Insecticide: WHOPES recommended
Concentration of insecticide: WHOPES recommended
Target level of concentration: WHOPES recommended
Qty: 900,000 pcs
Suppliers from Poland, Germany, Iran, Australia and Canada
Quantity Required : 900000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Mombsasa Port, Kenya
Payment Terms : TT
Looking for suppliers from : Portugal, Germany, Iran, Australia, Canada
Contact : Malaika Stephanie
Please provide a quotation to the following requirement from importer -
Product Name: Relief Tents
Specifications:
Poly-Cotton: (Polyester/Cotton blended fibers yarns). Cotton: 40%
(±10), polyester: 60% (±10) = Polyester: 50% to 70%, with balance
in cotton.
2. Specific weight (g/m2), ISO 3801 350 g/m2 ±15% in finished state.
3. Color Natural white, not dyed.
4. Water vapor permeability, ISO17229 Minimum 2000g/m2/24h.
5. Tensile strength (N), ISO 13934-1
To apply on 10 test pieces of plain canvas.
To apply on 5 test pieces with seams, cut from the tent, perpendicular
to the seam.
Warp and Weft 850 N minimum.
For plain canvas test: 5 test pieces in warp 5 test pieces in weft.
On seams, the grab test is applied on 25mm width in the 50 mm
sample.
6. Tear resistance (N) - Started, ISO 9073-4 Warp and Weft 60 N minimum.
7. Water penetration resistance, ISO 811
Test pieces of plain canvas.
30 hPa minimum, with increasing speed at 100mm per minute.
8. Rain penetration resistance, ISO5912 Test piece is the complete
outer tent only.
Resistance to rain as per point 4.2.11 applying procedure as point
5.6 during 2h on one end and 3h on one side.
9. Dimensional variation when soaking in water, ISO 7771 Maximum 3%.
10. Resistance to micro-organisms on tensile strength under, ISO
13934-1 after BS6085 (soil burial - 28 days).
Maximum 30% of strength loss on minimum required value and
maximum 50% strength loss on original value of the same product.
To apply on 10 test pieces of plain canvas and 10 test pieces with
seams.
For each type of test: 5 test pieces in warp 5 test pieces
Gross weight per unit: approx. 55.0 kg
Gross volume per unit: approx. 0.20 cbm
Quantity: 46,000 pcs
Quantity Required : 46000 Piece/Pieces
Shipping Terms : FOB
Destination Port : Mombasa, Kenya
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Malaika Stephanie
The buyer would like to receive quotations for -
Product : Cooking Kitchen Sets
Specifications:
1 x 7-litre cooking pot;
1 x 2.5-litre frying pan, which is used as a lid for 7 litre cooking pot;
1 x detachable handle for the 2.5 litre frying pan;
1 x 5-llitre cooking pot with a lid;
5 x 1-litre bowls;
5 x 0.75-litre plates;
5 x cups;
5 x tablespoons;
5 x table forks;
5 x table knives;
1 x kitchen knife;
2 x serving spoons;
1 x serving ladle;
1 x scouring pad.
Chemical composition:
Chemical composition of stainless steel as per EN 10088-1.
Acceptability limits:
Minimum chromium content: 16 %
Possible added elements: Ta, Nb, Zr, Mo, Ti, Al, Cu with the
following maximum contents:
1 p 100 for Ta, Nb, Zr
4 p 100 for Mo, Ti, Al, Cu
Quantity : Moq
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Mombasa Port, Kenya
Payment Terms : Bank Transfer
Looking for suppliers from : Kuwait, Turkey, Poland, Iran
Contact : Malaika Stephanie
Soda ash
Buy honey from farmers only.
Rubber chemicals, such as rubber accelerator, rubber antioxidant, rubber vulcanizing agent, rubber adhesive agent, rubber coupling agent, rubber adhesive agent, rubber release agent, rubber anti scorching agent, rubber curing resins
Buyer is interested to receive quotations for the following RFQ -
Name: Complete Solar system Product
Specifications:
Type
Batteries , Inverters
80 MEGA WATT
Setting up a 80 MW (megawatt) off-grid solar system in UNHCR camps in East Africa.Below is a breakdown of the key components needed to design and implement an 80MW off-grid solar power system Using an example of 1Mw. You are free to add or adjust.
1. Solar Panels (Photovoltaic Modules)
Capacity: To generate 1 MW, you would typically need around 2,000 to 3,000 solar panels, depending on the wattage of each panel.
o For example, if each panel has a capacity of 300 watts, you will need approximately 3,334 panels (1,000,000 watts / 300 watts per panel).
Panel Type: The most common types are monocrystalline and polycrystalline, with monocrystalline being more efficient and often used in large-scale projects.
Total Capacity: Panels must provide enough energy to meet the daily needs of the system, considering off-grid operation without relying on the grid.
2. Inverters
DC to AC Inverters: These convert the DC power generated by the solar panels into AC power, which is what most appliances use.
Inverter Size: For a 1 MW solar system, you will need inverters that can handle 1 MW of power. Typically, this means installing inverters that are slightly larger than the system?s nominal output capacity to handle peak loads.
Number of Inverters: A 1 MW solar system may require multiple inverters (e.g., 2 x 500 kW or 4 x 250 kW inverters), depending on the configuration.
3. Battery Storage (Energy Storage System)
Battery Type: Lithium-ion, lead-acid, or other advanced battery technologies can be used. Lithium-ion batteries are commonly used for large-scale solar off-grid systems due to their higher energy density and efficiency.
Battery Size: To store the energy generated by the solar panels for use during night-time or cloudy days, a large battery bank is needed.
o For example, if the system needs to run 24/7 with a 5-hour backup requirement, you'd calculate the battery bank size based on your daily energy consumption.
o Example: For a 1 MW system that operates 24 hours a day, it would need to generate around 24 MWh daily. Depending on your backup requirements, this could mean needing a battery bank that stores anywhere from 5-10 MWh or more.
4. Charge Controllers
Function: Charge controllers regulate the charging of batteries to ensure they don?t overcharge or undercharge, prolonging battery life.
Type: MPPT (Maximum Power Point Tracking) charge controllers are typically used in large solar systems to optimize the energy harvest from the solar panels.
Sizing: The charge controller should match the system's capacity. For 1 MW systems, you will need a high-power charge controller, and multiple controllers may be necessary depending on the number of panels and battery bank configuration.
5. Mounting Structures
Function: These are the physical structures that support the solar panels, ensuring they are securely mounted.
Types: Fixed tilt or tracking mounts.
o Fixed Tilt: More common in regions with consistent sunlight.
o Tracking Mounts: Move the panels to follow the sun, increasing efficiency, but at a higher initial cost.
6. Cabling and Wiring
DC Cabling: Connects the solar panels to the inverters and charge controllers.
AC Cabling: Connects the inverters to the battery bank and loads.
Sizing: Wiring should be appropriately sized to handle the current and minimize energy loss. In high-power systems, large cables and low-resistance wiring are important.
7. Disconnects and Protection Devices
DC Disconnects: To safely disconnect the solar panels from the system during maintenance or emergencies.
AC Disconnects: Disconnects the inverter and other AC components from the electrical load or grid.
Fuses and Circuit Breakers: Protect the system from electrical faults and overloads.
Quantity : 250,000 to 300,000 solar panels,
Qua
Coco peat
Canola Seeds.
Potatoes, onions, lentils, tomatoes, petroleum, carrots
Petroleum, potatoes, onions, tomatoes, passions
Pasion fruits, macadamia nuts, paw paws, kenya beans, asian vegetables, clean coffee beans, acacia honey
Clinker
Products we source: 1. maize 2. onions 3. beans 4. it equipment 5. cybersecurity equipment
Agriculture, coffee, grains, tea, beans
Cookware.
White Rice Broken.
Butter Beans.
Building Materials
Avocado.
