Steel zinc plated with a side slice
Stud Bolts
Bolts And Nuts
Small stainless steel d ring, tie-downs, d rings, anchors
Please quote for the following wholesale product requirement -
Product Name: Fasteners
Specifications:
Type: Nuts, Screws, Bolts, Etc.
Material: Stainless Steel, Carbon Alloy, Carbon Steel, Etc.
Size: Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Jordan
Payment Terms : BANK TRANSFER
Looking for suppliers from : Worldwide
Contact : Kazem
Please quote for the following wholesale product requirement -
Product Name: Stud Bolts
Specifications :
Metal M3 M4 M20 M40 M42 8mm Stud Bolt Full Thread I Bolts Acme Stainless Carbon Steel Thread Rod Bar Double Start Hdg Din975
Quantity Required : 300000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Izzat Saeed
Buyer is interested to receive quotations for the following RFQ -
Product Name: Formwork Accessories Rapid Spring Clamps
Specifications:
Dimension:115*50*5mm (Customized)
Spec: For Use Max12mm Rebar
Material: Ductile Iron QT450-10+Spring Steel
Surface Finish: Zinc Plating
Quantity Required : 40000 Piece/Pieces(sample)
Shipping Terms : FOB Or CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Ali Al-Bustanji
Please provide a quotation to the following requirement from importer -
Product Name: Hardware Spare Parts
Specifications :
Type: Nails, Screws & Fasteners, Brackets, Collated Nails, Braces
Material Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Amman, Jordan
Payment Terms : CAD
Looking for suppliers from : Worldwide
Contact : Amjad
The buyer would like to receive quotations for -
Product Name: Suspension Clamp With Bracket
Specifications :
Accessories For Aluminum Self-supported Insulated Aerial Bundled Cable
Quantity
1.Accessories for aluminum self-supported insulated aerial bundled cable for attachment to poles complete
As follows:
1.1 Dead end clamp for 70 mm2 neutral messenger. No. 15000 Pcs
1.2 Suspension clamp with bracket
No. 6000 Pcs
Conductors for phases must be hard-drawn aluminum round compacted stranded with size of (120, 95&50) mm2 while street lighting conductor is 25 mm2.The neutral conductor must be of aluminum alloy (95,70&35) mm2. All cores are black (XLPE) weather and Ultra-Violet (UV) resistance insulated, in accordance to NFC Standard or equivalent.
Tension charts for the required types of cables should be submitted with the offer to cover the following design conditions:-
Cold area Hot area
Min. ambient temp............... Deg C -10 0
Every day temp.................... Deg C 20 25
Max. ambient temp............... Deg C 40 50
Wind Loading (over ice).......... (N/m2) 700 700
Ice loading (radial thickness)... (mm) 10 0
A factor of safety at min. temp. 2.5 2.5
The factor of safety at everyday temp. 5 5
The main dimensions of the low voltage twisted cable 0.6 / 1 kV
(3*120+25+70 (mm2, are as follows:)
-Main phase conductor = 120 mm2
-Construction = 19 wires- hard drawn aluminum round compacted stranded
-Insulation thickness = 1.8 mm-XLPE
-Lighting conductor construction = 25 mm2
-Construction = 7 wires - hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction = 7 wires - Non compacted
- Insulation thickness = 1.6 mm XLPE
-Approximate Nominal overall diameter of cable = 45 mm
-Nominal weight of cable per meter =1.65 kg
Main phase and lighting conductors are twisted around neutral; breaking load:
120 mm2 phase conductor aluminum = 14 kN 25mm2 lighting conductor aluminum = 2.5kN 70 mm2 neutral aluminum alloy =20.6kN
Max. D.C. resistance at 200 C:
120 mm2 phase condominium =0.253 ohm/km 25 mm2 lighting conductor aluminum =1.2 ohm/km 70 mm2 neutral aluminum alloy =0.493 ohm/km
The main dimensions of the low voltage twisted cable 0.6 / 1 kV
(3*95+25+70 (mm2, are as follows:
-Main phase conductor = 95 mm2
-Construction = 19 wires- hard drawn aluminum round compacted stranded
-Insulation thickness = 1.8 mm-XLPE
-Lighting conductor construction = 25 mm2
-Construction = 7 wires – hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction = 7- Non compacted
-Insulation thickness = 1.6 mm XLPE
-Approximate Nominal overall diameter of cable = 45 mm
-Nominal weight of cable per meter =1.357 kg
Main phase and lighting conductors are twisted around neutral; breaking load:
95 mm2 phase conductor aluminum = 14 kN 25mm2 lighting conductor aluminum = 2.5kN 70 mm2 neutral
-Lighting conductor construction = 25 mm2
-Construction = 7 wires – hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction
Quantity Required : 21000 Piece/Pieces
Shipping Ter
Please quote for the following wholesale product requirement -
Product Name: Repair Clamps
Specifications:
Bands
Nominal Pipe Size (Inch)
Pipes Material Type
Length (mm)
No. bolts
Single Band 2
HDPE
3500
150 2
3
DI
150
150
2
4
DI
1000
150
2
5
HDPE
1000
150
2
6
DI
200
200
3
Double Bands
8
DI
25
300
3*
1. SCOPE
This Specification specifies the requirements for the design, materials and in-service performance of mechanical stainless steel repair clamps for waterworks purposes.
This Specification is designated for applications involving rigid pipes, typically ductile iron (DI), grey cast iron (CI), and steel (S). Also, for applications involving flexible pipes, typically un-plasticized polyvinylchloride (PVC-U) and high-density polyethylene (HDPE).
All materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.
The atmospheric temperature in Jordan varies between -10 C and 50 C.
2. Application
Stainless steel repair clamps complying with this specification are intended for use in repair of water supply pipelines of the size designated in Table 1, with a maximum service temperature of 50°C and up to an allowable operating pressure of 16 bars for ranges diameter up to 250 mm and 10 bar for diameters larger than 250 mm. Repair clamps have limited ability to accommodate axial deflection and are, therefore, not generally intended for use as couplings to join tow pipes together. However, they are commonly utilized for repair situations at full pipe break, where the pipe ends are considered stable. In addition, repair clamps complying with this specification are intended to provide a permanent means of preventing loss from or contamination of pipelines that have been affected by corrosion or mechanical damage in both above-ground and buried applications.
3. Materials
The material of the Clamps shall be
Bands: Stainless Steel Grade AISI 304(A2) to BS1449:1991: part 2 or Grade AISI 316(A4) stainless steel to BS 1449:1991:part 2, for corrosion resistance.
Bolts shall be Stainless Steel A2, Teflon coated, or mild steel. Nuts & washers shall be Stainless Steel A2, or mild steel class 4.6 to BS EN20898: Part 1. Receiver bars shall be TIG- welded to shell to form strong fusion, and fully passivated after welding,
Gasket shall have a gridded pattern for positive sealing, and to be made of specially compounded NBR rubber specially formulated for water service or EPDM. Compound Grade E to BS2494:1990
4. Design
The Clamps shall be used for permanent repair of cracks, holes, or complete breakages of steel, ductile Iron, PVC and HDPE pipes.
The Clamps shall be suitable for potable water for Temperature range (-10 to 50) C. potable water certificate must be submitted .
Repair Clamps shall be standard full circle single band for diameter 150mm or less. And full circle double band for diameter more than 150mm, length and number of bolts not less than the values in Table 1 for each diameter.
Gasket shall provide a 360o sealing surface and of such size and shape to provide an adequate compressive force against the pipe after assembling to affect a positive seal under all combinations of joint and gasket tolerances. And heavy gauge Type 304 stainless Steel bridge plate shall be attached into the gasket end to span the lug area and to make installation quick and easy.
Bolt retainer assembly or lugs shall be of a type 304 stainless steel, and shall be MIG welded to receiver bar and fully passivated after welding. Lugs may be cast, forged or cold formed of type 304 stainless steel, and may include a high impact polycarbonate plastic, non corrosive retainer. Lug design shall
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Con
Please quote for the following wholesale product requirement -
Product Name: Fasteners
Specifications :
Type: Screws, Bolts, Nuts, Washer, Gaskets, Etc.
Material: Steel, Brass, Stainless Steel, Etc.
Size: Standard, Customized
Use: Industrial
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : CFR
Destination Port : Jordan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Maher
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Type: Nuts, Bolts, Screws
Use: Industrial
Material: Copper, Metal, Brass
Size: Customized
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Jaber
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Type: Nuts, Bolts, Screws
Use: Industrial
Material: Copper, Metal, Brass
Size: Customized
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Jaber
The buyer would like to receive quotations for -
Product Name: Fasteners
Specifications:
Type: Screws, Bolts, Nuts, etc.
Material: Stainless Steel, Aluminium, Steel, Etc.
Size: Standard
Use: Industrial
Packaging Terms : Pallets
Quantity Required : 1000 - 5000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Aymen
Please provide a quotation to the following requirement from the importer -
Product Name: Bolts And Nuts
Specifications:
Category: Bolts
1. Hexagonal M16x60mm, fully threaded bolts and nuts. 120,000
2. Hexagonal M16x120mm, 35mm threaded bolts and nuts. 20,000
- The required Hexagonal Bolts and nuts shall be hot-dipped galvanized carbon steel grade 4.8 of min. Tensile strength 42.8 kg/mm2 and min. Yield strength 34.7 kg/mm2 according to DIN 933 and DIN 934 respectively.
Galvanizing shall be of uniform with minimum average thickness of 45 microns and shall be in accordance to BS 729 or an equivalent approved standard.
- Bolts and nuts shall be assembled together before shipment within the packing stage
Quantity Required : 140000 Piece/Pieces(sample)
Shipping Terms : CFR
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Feri Ametia Pratama
Automotive parts: engine mounts, transmission mounts, rubber parts, bushings, autmotive bolts and nuts, suspension parts, brake parts, primarily for japanese vehicles
Please provide a quotation to the following requirement from importer -
Product Name: Hardware Fittings
Specifications:
Nails, Screws & Fasteners. Brackets. Collated Nails. Braces.
Material standard
Worldwide Suppliers
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Amman, Jordan
Payment Terms : CAD
Looking for suppliers from : Worldwide
Contact : Amjad
Please provide a quotation to the following requirement from the importer -
Product Name: Fasteners
Specifications:
Type: Screws, Bolts, Nuts, Washer, Gaskets, Etc.
Material: Steel, Brass, Stainless Steel, Etc.
Size: Standard & Customized
Use: Industrial
Packaging Terms : Standard
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : CFR
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Tudu
Pressure Washer
