Please provide a quotation to the following requirement from importer -
Product Name: GI Fittings
Specifications :
Item Description Qty Unit
1 GI Coupling 1/2" Weldable 1,500 Ea (10pcs/Bag)
2 GI Coupling 3/4" Weldable 1,500 Ea (10pcs/Bag)
3 Weldable 1" Coupling GI 1,000 Ea (10pcs/Bag)
4 Weldable 2" Coupling GI 500 Ea (5pcs/Bag)
5 GI Union Joint 1/2" 200 Ea (10pcs/Bag)
6 GI Union Joint 3/4" 1,000 Ea (10pcs/Bag)
7 GI Union Joint 1" 1,000 Ea (10pcs/Bag)
8 GI Union Joint 2" 500 Ea (5pcs/Bag)
9 GI Nipple 1/2" 25,000 Ea (10pcs/Bag)
10 GI Nipple 3/4" 33,000 Ea (10pcs/Bag)
11 GI Nipple 1" 5,00 Ea (10pcs/Bag)
12 GI Nipple 2" 1,000 Ea (5pcs/Bag)
13 GI Reducer 3/4" x 1/2" 20,000 Ea (10pcs/Bag)
14 GI Reducer 1" x 1/2" 1,000 Ea (10pcs/Bag)
15 GI Reducer 1" x 3/4" 6,000 Ea (10pcs/Bag)
16 GI Reducer 2" x 3/4" 200 Ea (5pcs/Bag)
17 GI Reducer 2" x 1" 200 Ea (5pcs/Bag)
18 GI Tee 1/2" 200 Ea (10pcs/Bag)
19 GI Tee 3/4" 4,000 Ea (10pcs/Bag)
20 GI Tee 1" 500 Ea (10pcs/Bag)
21 GI Tee 2" 100 Ea (5pcs/Bag)
22 GI Tee Reducer 3/4" x 1/2" x 3/4" 4,000 Ea (10pcs/Bag)
23 GI Tee Reducer 1" x 1/2" x 1" 1,000 Ea (10pcs/Bag)
24 GI Cross 3/4" 500 Ea (10pcs/Bag)
25 GI Cross 1" 500 Ea (10pcs/Bag)
26 GI Elbow 1/2" 1000 Ea (10pcs/Bag)
27 GI Elbow 3/4" 15,000 Ea (10pcs/Bag)
28 GI Elbow 1" 3,500 Ea (10pcs/Bag)
29 GI Elbow 2" 500 Ea (5pcs/Bag)
30 GI Reducer Elbow 1" x 1/2" 100 Ea (10pcs/Bag)
31 GI Reducer Elbow 3/4" x 1/2" 250 Ea (10pcs/Bag)
32 GI plug 1/2" with a hole 4,500 Ea (10pcs/Bag)
33 GI plug 3/4" with a hole 1,000 Ea (10pcs/Bag)
34 GI plug 1" with a hole 1,000 Ea (10pcs/Bag)
35 GI plug 2" with a hole 500 Ea (5pcs/Bag)
Galvanized Iron Fittings specifications
1.1 Ambient Conditions
All Fittings, materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.
The atmospheric temperature in Jordan varies between -10°C and 50 °C.
1.2 Potable Water Certification
All Fittings and materials shall be certified for potable water use, and all fittings and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements..
1.3 Toxic Materials
Fittings and components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discoloration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health Non toxicity certificate should be provided.
1.4 Third Party Witness
The supplier must submit at least 3 different international third party companies where Miyahuna will choose one of them.
The supplier shall furnish an original certificate from a third party inspection agency showing all test resu
Specifications:
Looking For 2 Types Of Radiator:
1. Cooling Water Heat Exchanger as per the following specifications: (needed quantity : 1)
• Air To Water Heat Exchanger
Ge Part No.: 298a8917p003/298a8917p001. Manufacturer: Aerofin/ Usa.
Headers: Carbon Steel, Outside The Casing.
Tubes: 5/8" Od X .025" Avg Wall Seamless Copper With Bends. Joints: Brazed.
Fins: Aluminum Edgewound At 14 Fpi - Cannot Be Solder 1coated. Casing: Galvanized Steel Sheet.
Conns: 4" Ips Victaulic Carbon Steel (same End).
No. Of Tubes: 208.
No. Of Columns: 8.
No. Of Rows: 52.
No. Of Length: 5.23 M.
Height: 1.17 M.
• Width: 34 Cm.
Quality: Includes Metal Nametag And Pneumatic Test Report.
2. Cooling Water Heat Exchanger As Per The Following Specifications And The Attached Drawing Quantity : 2
• Air To Water Heat Exchanger
• Mfg: Luwa Japan Ltd.
• MFG No.: NGO 244-1
Quantity:
2-3 Piece/Pieces
Specifications :
Type: AC Motors, Gear Motors, Etc.
Size: Standard
Material: Stainless Steel, Steel, Brass, Etc.
Application: Different Machines
Power: Electronic
Please provide a quotation to the following requirement from importer -
Product: Industrial Brakes Clutches
Specifications:
brake linings sets for Toyota coaster and Mitsubishi Rosa buses. Sizes: 335x76x10 mm 310x85x10 mm 335x110x10 310x76x8 And some other similar sizes
