Specifications :
Send Also Photos
Rollaway Beds
Dimensions In Unfolded
Position
Length Not Less Than 190cm
Width Not Less Than 65cm
Height From The Ground Not Less Than 40cm
Dimensions In Folded
Position
Length Not More Than 110cm.
Width Not More Than 25cm.
Thickness No More Than 20cm
Construction Lightweight Metal Construction With Bed Legs Stoppers
Textile Part Made Of Reinforced Polyester. smooth Surface Resistant To
Water And Dirt.
Load Capacity Minimum 120 Kg.
Weight Weight – Not More Than 10 Kg.
Storage And Transportation
Bag
Bag For Storing And Transporting The Rollaway Bed With
Handle(s) With The Possibility Of Carrying Over A Shoulder
Specifications Required
Tents - 500 Pieces Manufacturer
model
1. Sizes
Length At The Base (external Size) – Not Less Than 4,90 M
Width At The Base (outer Size) – Not Less Than 4,70 M
Height From The Ground To The Top (highest Point) – Not Less Than 2,5
M
Side Wall Height(s) – Not Less Than 1,7 M
Capacity Of The Tent - For A Minimum Of 8 Persons, single Rollaway
Beds For 8 People
2. Construction
Lightweight Prefabricated construction With High Durability And
Resistance To Twisting;
Main Material Of The Construction – Aluminum Alloy
Accessories For Assembly And Fastening: Scaffolding Fittings,
Coupling Elements, strengthening Elements, Ground Anchorage Pegs,
Ropes, Etc. according To The Manufacturer's Decision
3. Material
Material – Textiles Made Of Cotton/polyester (minimum 50 %
Cotton)
Specific Mass Of The Material (mass Per Unit Area) – Not Less Than 420
G/m 2
Hard-to-burn material Fire Resisting Class Not Lower Than "b"
According To En 13501-1 Or Equivalent;
Breathable, Waterproof, impregnated;
Resistant To Rupture;
Provide Protection Against water Ingress With Water Resistance Of
Textiles Of At Least 420 Mm Water Column
4. 2 Opposite Entrances With Minimum Size: Width - 1m And Height - 2
Entrance M With Zip To Close with Opening/closing On Both Sides;
One Of The Two Entrances Shall Be Fitted With The Relevant Elements
Enabling The Tents To Be Directly Connected To Each Other;
5. Windows
2 Windows With Sizes At Least 40 X 60 Cm, Located One On Two
Opposite Sides Other Than The Entrances Fitted With An Insect Net And
An Outer Lid Winding Into A Roll With Fixing Elements
6. Weight Weight Of Tent With Structural Elements And Accessories – Not More
Than 85 Kg
7.
Water
Repellent safety
Tape
At The Bottom Along The Entire Circumference, The Tent Is Equipped
With An Additional Pvc Water Repellent Tape, Preventing Water From
Entering The Interior
8. Storage Bags Bag(s) For Storing The Tent And Tent Accessories.
9. Sustainability
Requirements
The Tent Shall Be Resistant To Load On The Roof With A Minimum Of
0,105 Kn/m 2 (10,5 Kg/m 2 ) Of Snow And Shall Be Wind Resistant At A
Speed Of At Least 0,14 Kn/m 2 (15 M/s) According To En 13782 Or
Equivalent
Specifications:
Protein (N x 57 on dry basis): 12.5 min. Wet gluten (according to ISO 21415-1): 26 % min. Test weight: 78 Kg/hI min W (ISO): 220 min Number of falls (Hagberg): 250 min. Moisture: 14.0 % max. Bug Damage: 1.0% Max. Foreign particles: 1.0 % Max. Healthy, loyal, marketable. No live weevils, live insects after fumigation
