Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sydney, Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Steve Bae
The buyer would like to receive quotations for -
Product Name: Tetrapod Block Moulding Machines
Durable precast concrete moulds, coastal breakwater Tetrapods for sea shore
protection
Product Description
Concrete moulds shape: Tetrapod
Size: 3 ton
Concrete mould are infrastructure used for break coastal waves in order to reduce the occurrence
of coastal abrasion. The moulds are made of steel which has guarantee quality according to the
design size requested by the customer.
Name Concrete stone moulds – Tetrapod type
Material: Steel, environmentally friendly and pollution-free, with a wide range of applications.
Size/Shape: Can be customized according to customer requirements
Application sea slope protection.
Quantity 3 x sets Tetrapod Moulds for concrete, 3 ton
Quantity Required : 3 Set/Sets
Shipping Terms : CIF
Destination Port : Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Jarryd Eves
Please quote for the following wholesale product requirement -
Product Name: Rubber Hollow Mats (Circle)
Specifications :
Size : 4 0 X 70 Cms, 17mm Thick
Suppliers From All Over The World
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF Or FOB
Destination Port : Australia
Payment Terms : T/T (30-60 Days Credit)
Looking for suppliers from : Worldwide
Contact : Sanath
Buyer is interested to receive quotations for the following RFQ -
Product Name: Hollow Copper Spheres
Specifications :
50mm
Quantity Required : 50 Piece/Pieces(sample)
Shipping Terms : FOB
Destination Port : Adelaide, Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Jan Van Dzura
Please quote for the following wholesale product requirement -
Product Name: Frozen Fish
Specifications :
Type: Surimi Blocks
Different Sizes Blocks Of Frozen Surimi
Style: Frozen
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Australia
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : David Williams
Please quote for the following wholesale product requirement -
Product Name: Black Board
Quantity Required : 1000 Piece/Pieces(sample)
Shipping Terms : CIF
Destination Port : United States
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Trevor Porter
Buyer is interested to receive quotations for the following RFQ -
Product Name: Acrylic Hollow Threaded Rod
Specifications :
Length 142mm
Diameter 35mm
Two Screws Per Rod
Hardness: 3h
Light Transparence: About 92%
Condition: New Material
Color:c Lear, Colored, Bubble
Quantity Required : 50 Unit/Units(sample)
Shipping Terms : CIF
Destination Port : Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Apurva Ghone
Conseal Concrete Plugs.
Compressed wood block,wood block
Insulated concrete forms
Stone paving
Please provide a quotation to the following requirement from importer -
Product Name: Mats
Specifications :
Type: Handwoven Mats, Floor Mats, Door Mats, Rubber Hollow Mats
Material: 100% Cotton Tufted, Plastic, Rubber
Different Sizes
Color: Brown, Mehroon, Blue, Etc.
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Sanath
Please quote for the following wholesale product requirement -
Product Name: Terminal Blocks
Specifications:
Pitch: 3.5mm, 5.0/5.08mm, 9.5mm
Conductor Size: 11 - 20 AWG, 21 - 30 AWG
Number of Contacts: 1 - 10/Any as per demand
Type: PCB,screwless 3.5m etc.
Packaging Term: Standard
Packaging Terms : Standard
Quantity Required : 1 Forty-Foot Container (sample)
Shipping Terms : FOB
Destination Port : Sydney, Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Parmar
Buyer is interested to receive quotations for the following RFQ -
Product Name: Block Tin ingots
Specifications :
Require an ISO 9001 and purity certificate along with a sample.
Quantity Required : 1 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Sri Lanka
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Prasanna Gopal
Please quote for the following wholesale product requirement -
Product Name: Pillow Block Bearings
Specifications :
Pillow Block Bearing Ucp205-16 Ucp 205-16
Bearing Material:100% Chrome Steel
Feature: Long Life
Service: Customized Service
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Australia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Paul Ferbrache
Please quote for the following wholesale product requirement -
Product Name: Terminal Blocks
Specifications :
Pitch: 3.5mm, 5.0/5.08mm, 9.5mm
Conductor Size: 11 - 20 AWG, 21 - 30 AWG
Number Of Contacts: 1 - 10/any As Per Demand
Type: PCB, Screw Less 3.5m Etc.
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Australia
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Parmar
The buyer would like to receive quotations for -
Product: Granite Blocks And Slabs
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Fremantle, Australia
Payment Terms : LC
Looking for suppliers from : Viet Nam, Indonesia
Contact : Balbir Rajput
The buyer would like to receive quotations for -
Product Name: Carbon Anode Blocks
Specifications:
Quantity: 2000 Tons
Quantity Required : 2000 Ton/Tons
Shipping Terms : CIF
Destination Port : Kuala Lumpur, Malaysia
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Abdul Rahim
Please provide a quotation to the following requirement from importer -
Product Name: Terminal Blocks
Specifications:
Type : Elmex Electrical Terminal Blocks
Material : Steel , Brass , Haevy Duty Base
Use : Machines , Electric
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF/FOB
Destination Port : Australia
Payment Terms : 45 Days TT
Looking for suppliers from : Worldwide
Contact : Narelle/Peter Lyons/James
The buyer would like to receive quotations for -
Product Name: Quartz Blocks
Specifications :
Specifications To Be Shared With Suppliers
Technical Data Sheet Is Required
Quantity Required : 1000 Ton/Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Gl Zhang
