Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Tubes And Pipes
Specifications :
(Gi) Made Up Of Non Alloy Steel
Technique: ERW
Section Shape: Round
Surface Treatment: Galvanized
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Colombo, Sri Lanka
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Rajan
The buyer would like to receive quotations for -
Product Name: Steel Wire Rod
Specifications :
Rolled Non-alloy Steel Wire For Cold Drawing C70d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 200 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): C: 0.68 - 0.72 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer. 2. Rolled Non-alloy Steel Wire For Cold Drawing C42d2 According To En 10016-4 - Size 5.5 Mm - Dimensional Tolerance: +/- 0.20 Mm - Monthly Consumption: 50 Tons - Oval: Max. 0.20 Mm - Chemical Composition (analysis On Liquid Steel): - C: 0.40 - 0.44 % - Si: 0.10 – 0.30 % - Mn: 0.50 – 0.70 % - P: Max. 0.020 % - S: Max. 0.025 % - Cr: Max. 0.10 % - Ni: Max. 0.10 % - Mo: Max. 0.03% - Cu: Max. 0.15 % - Al: Max. 0.01 % - N: Max. 0.007 % Permissible Deviations For Chemical Analysis On The Product According To En 10016-4. Laminated Wire Must Not Have Surface Discontinuities With Depths Greater Than 0.15 Mm, Cracks, Overlaps, Chips, Burrs Or Impact Marks That May Influence Correct Use. The Rolled Wire Must Not Have Total Decarburization And The Partial Decarburization Must Not Exceed 0.10 Mm According To En 10016-1. The Microstructure Of The Wire, Resulting In The Rolling Process, Must Allow The Processing By Cold Drawing With A Total Reduction Of 90%. Delivery Method: The Wire Is Delivered On A Batch. The Number Of Batches On Delivery Must Be Limited As Much As Possible. Delivery Status: The Semi-finished Wire Must Be Delivered In The Raw Rolling State, In Coils With Continuous Wire Wrapped In Unarranged Coils, But Having The Possibility To Allow The Regular Winding During Subsequent Processes. The Coils Must Be Cut At Both Ends To Ensure The Supply Of Product With Uniform Shape And Properties. Marking: Each Delivered Coil Must Be Marked With The Following Information: - Wire Size - Symbolization Of The Steel Brand - Batch Number - Name / Symbol Of The Manufacturer
Quantity Required : 250 Ton/Tons
Shipping Terms : DAP
Destination Port : Baia Mare,
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Rares Valean
Please provide a quotation to the following requirement from importer -
Product Name: Steel Sheets And Coils
Specifications:
Material: Stainless Steel, Mild Steel
Type: Annealed, Hardened, Tempered Spring Steel
Form: Sheets, Coils, Rolls
Size: Customize
Use: Industrial
Technique: Hot / Cold Rolled
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Kuwait, Kuwait
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Asif
Please quote for the following wholesale product requirement -
Product Name: Fabricated Steel
Specifications :
Material Fabricated 100%
Size Customize
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : FCA Or FOB
Destination Port : Tokyo, Japan
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Tamaki
Please provide a quotation to the following requirement from importer -
Product Name: Steel Sheets And Coils
Specifications:
hot rolled Coil/ cold rolled coil/ Hot Rolled Pickled & Oiled Steel/ PPGI coil.
stain less steel/grades - 430 and 304
GI COILS OVER ROLLED
Thickness: 0.20mm to4.00mm
Width 600mm to 2000mm
EG COILS
Thickness: 0.20mm to 3.00mm
Width: 600mm to 2000mm
HR/PO COILS
Thickness: 1.20mm,
1.80mm,
2.00mm,
3.20mm,
3.50mm
12.00mm
Width: 600mm to 1600mm
CHECKER COILS & SHEETS
Thickness: 2mm,
3mm,
4mm,
6mm,
8mm,
10mm
Width: 914mm to 1800mm
COLOR COILS
Thickness: 0.18mm TO 0.60mm
Width: 500mm to 1219mm
STAINLESS STEEL
Grade 430 & 304 series
Quantity Required : 100 - 500 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Chittagong, Bangladesh
Payment Terms : LC
Looking for suppliers from : Japan, South Korea (Republi
Contact : -Md. Sazzadul Islam
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Sheets And Coils
Specifications :
Material: Stainless Steel, Steel
Form: Sheets, Coils, Rolls
Size: Customize
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Kuwait
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Asif
Please provide a quotation to the following requirement from importer -
Product Name: Steel Coils And Sections
Specifications :
Coil 1250mm with thickness 0.4/ 0.5/ 0.6 / 0.8 and 1mm.
And Profile Sections with thickness 1.5/ 2 and 3 mm in following sizes: 40*40 / 50*50 / 60*60 / 80*80 / 90*90
Quantity Required : 200 - 400 Ton/Tons
Shipping Terms : CIF
Destination Port : France And Azerbaizaan, Azerbaijan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Neda
The buyer would like to receive quotations for -
Product Name: Steel Pipes And Tubes
Specifications :
Type: Galvanized Pipe, Seamless Pipe, Api Pipe, Rectangle, Round, Square Tube, Etc.
Material: Galvanized, Black Iron, Steel
Size: All Sizes
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Doha, Qatar
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Naushad
The buyer would like to receive quotations for -
Product Name: Steel Bars And Rods
Specifications :
Type: Machined Bars, ETP Rods, Reinforced, Round, Bright Bars, Copper Tungsten Rods, Steel Rods, Copper Rods
Like: Hollow, Hexagonal Rods
Material: Stainless Steel, Steel
Shape: Round
Size: Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Manama, Bahrain
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Shahbaz
Please quote for the following wholesale product requirement -
Product Name: Steel Coils, Sheets
Specifications :
Material: Structural Steel, Stainless Steel
Use: Industrial
Like: Hot Rolled, Cold Rolled
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CFR
Destination Port : Manama, Bahrain
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Anish Kumar
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Bars And Rods
Specifications :
Type: Bars, Rods
Style: Hollow, Hexagonal Rods
Material: Stainless Steel
Packaging Terms : Wood Pallets
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : Ex-Work
Destination Port : Poland
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Daniel Szlachetka
Please quote for the following wholesale product requirement -
Product Name: Steel Sheets And Coils
Specifications:
Material: Stainless Steel , Steel
Form: Sheets, Coils, Rolls
Size: Customize
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Kuwait
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Asif
Please quote for the following wholesale product requirement -
Product Name: Steel Coils And Sheets
Specifications :
Material: Structural Steel, Stainless Steel
Type: Annealed, Hardened, Tempered Spring Steel
Size: Customize
Form: Sheets, Coils
Use: Industrial
Like: Hot Rolled, Cold Rolled
Shipping Terms : FOB Or DDP
Destination Port : Doha, Qatar
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Muhammed Amin
The buyer would like to receive quotations for -
Product Name: Galvanized Steel Section
Specifications:
Type - Metal Section-Hat Furring Channel,
Material -Galvanized Steel,
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF , FOB
Destination Port : Doha, Qatar
Payment Terms : TT , LC
Looking for suppliers from : Worldwide
Contact : Hayath
Please quote for the following wholesale product requirement -
Product Name: Steel Wire Coils
Specifications :
SEA :1008 /
Grade : 60 /
Size : 5mm/6mm/8mm
Quantity Required : 112 Ton/Tons
Shipping Terms : To be discussed with suppliers
Destination Port : Jordan
Payment Terms : LC
Looking for suppliers from : Egypt
Contact : Salma
Please provide a quotation to the following requirement from importer -
Product Name: Steel Coils / Sheets
Specification:
Material: Structural Steel, Stainless Steel
Use: Industrial
Like: Hot Rolled, Cold Rolled
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : FOB/DDP
Destination Port : Doha, Qatar
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Muhammed Amin
Buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Wire Rods
Specifications :
PC strand 12.7 ASMT A416
150 tones every month
Quote Via Email
Quantity Required : 150 Ton/Tons Monthly
Shipping Terms : CIF/CFR/FOB
Destination Port : Sohar, Oman
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Naveen Viswanathan
The buyer would like to receive quotations for -
Product Name: Steel Coils And Sheets
Specifications:
Secondary Steel Coil, Sheet, Hr, Cr, Ga, Gi
For Making Water Clamp
GI Coil Secondary
Quantity Required : 5 Ton/Tons(sample)
Shipping Terms : By Road
Destination Port : India
Payment Terms : Bank Transfer
Looking for suppliers from : India
Contact : Mubarak Basha
Please quote for the following wholesale product requirement -
Product Name: Steel Rebars And Beams I And H
Specifications:
Quality: High-Grade
Quantity Required : 10 Ton/Tons
Shipping Terms : CIF Or FOB
Destination Port : Trinidad and Tobago
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Raj Rampersad
Please quote for the following wholesale product requirement -
Product Name: Steel Rebars And Beams
Specifications :
I And H
High-Grade Quality
Quantity Required : 10 Ton/Tons
Shipping Terms : CIF
Destination Port : Trinidad and Tobago
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Raj Rampersad
