The buyer would like to receive quotations for -
Product Name: Fasteners
Specifications :
Variety: Washers, Fasteners, Etc.
Material: Steel, Brass, SS
Size: Vario
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Oman
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Am Rahman
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications:
Type: Screws
Size: Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CNF
Destination Port : Qatar
Payment Terms : LC /TT
Looking for suppliers from : Worldwide
Contact : -Mr. Shahid
Buyer is interested to receive quotations for the following RFQ -
Product Name: Brass Nuts / Inserts
Specifications:
Threaded & Knurled Nuts
Material: Brass
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Israel, Israel
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Zvika
Please quote for the following wholesale product requirement -
Product Name: Fasteners
Specifications:
Coupling Shaft Nut, Screw, Thrust Washer
Size: As Per Buyer
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Singapore, Singapore
Payment Terms : LC/ TT
Looking for suppliers from : Worldwide
Contact : Haekal
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Type: Nuts, Bolts, Screws
Material: Brass, Alloy, Steel
Use: Industrial
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : Ex Works
Destination Port : Singapore
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Thomas
Please provide a quotation to the following requirement from importer -
Product Name: Head Anchor Bolt Galvanised Finish
Specifications:
m10x90mm countersunk head anchor bolt , galvanised finish
Quantity Required : 58000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Uae, United Arab Emirates
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Hamza Ali
Please quote for the following wholesale product requirement -
Product Name: Repair Clamps
Specifications:
Bands
Nominal Pipe Size (Inch)
Pipes Material Type
Length (mm)
No. bolts
Single Band 2
HDPE
3500
150 2
3
DI
150
150
2
4
DI
1000
150
2
5
HDPE
1000
150
2
6
DI
200
200
3
Double Bands
8
DI
25
300
3*
1. SCOPE
This Specification specifies the requirements for the design, materials and in-service performance of mechanical stainless steel repair clamps for waterworks purposes.
This Specification is designated for applications involving rigid pipes, typically ductile iron (DI), grey cast iron (CI), and steel (S). Also, for applications involving flexible pipes, typically un-plasticized polyvinylchloride (PVC-U) and high-density polyethylene (HDPE).
All materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.
The atmospheric temperature in Jordan varies between -10 C and 50 C.
2. Application
Stainless steel repair clamps complying with this specification are intended for use in repair of water supply pipelines of the size designated in Table 1, with a maximum service temperature of 50°C and up to an allowable operating pressure of 16 bars for ranges diameter up to 250 mm and 10 bar for diameters larger than 250 mm. Repair clamps have limited ability to accommodate axial deflection and are, therefore, not generally intended for use as couplings to join tow pipes together. However, they are commonly utilized for repair situations at full pipe break, where the pipe ends are considered stable. In addition, repair clamps complying with this specification are intended to provide a permanent means of preventing loss from or contamination of pipelines that have been affected by corrosion or mechanical damage in both above-ground and buried applications.
3. Materials
The material of the Clamps shall be
Bands: Stainless Steel Grade AISI 304(A2) to BS1449:1991: part 2 or Grade AISI 316(A4) stainless steel to BS 1449:1991:part 2, for corrosion resistance.
Bolts shall be Stainless Steel A2, Teflon coated, or mild steel. Nuts & washers shall be Stainless Steel A2, or mild steel class 4.6 to BS EN20898: Part 1. Receiver bars shall be TIG- welded to shell to form strong fusion, and fully passivated after welding,
Gasket shall have a gridded pattern for positive sealing, and to be made of specially compounded NBR rubber specially formulated for water service or EPDM. Compound Grade E to BS2494:1990
4. Design
The Clamps shall be used for permanent repair of cracks, holes, or complete breakages of steel, ductile Iron, PVC and HDPE pipes.
The Clamps shall be suitable for potable water for Temperature range (-10 to 50) C. potable water certificate must be submitted .
Repair Clamps shall be standard full circle single band for diameter 150mm or less. And full circle double band for diameter more than 150mm, length and number of bolts not less than the values in Table 1 for each diameter.
Gasket shall provide a 360o sealing surface and of such size and shape to provide an adequate compressive force against the pipe after assembling to affect a positive seal under all combinations of joint and gasket tolerances. And heavy gauge Type 304 stainless Steel bridge plate shall be attached into the gasket end to span the lug area and to make installation quick and easy.
Bolt retainer assembly or lugs shall be of a type 304 stainless steel, and shall be MIG welded to receiver bar and fully passivated after welding. Lugs may be cast, forged or cold formed of type 304 stainless steel, and may include a high impact polycarbonate plastic, non corrosive retainer. Lug design shall
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Con
Please provide a quotation to the following requirement from importer -
Product Name : Bolt
Specifications:
Material : Steel Bolt
Type: Fastener
Size : Brass Builders Hardware-Brass Flush Bolt S-57241-Orb 24X1 (600X25Mm)
Brass Builders Hardware-Brass Hi , Brass Flush Bolt S-57241-Pb 24X1 (600X25Mm)
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Manama, Bahrain
Payment Terms : CAD
Looking for suppliers from : Worldwide
Contact : Prince
Please quote for the following wholesale product requirement -
Product Name: Brass Nickel Bolts
Specifications :
Material: Brass
Size: Customized
Application: Industrial
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Singapore
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Amy
The buyer would like to receive quotations for -
Product Name: Suspension Clamp With Bracket
Specifications :
Accessories For Aluminum Self-supported Insulated Aerial Bundled Cable
Quantity
1.Accessories for aluminum self-supported insulated aerial bundled cable for attachment to poles complete
As follows:
1.1 Dead end clamp for 70 mm2 neutral messenger. No. 15000 Pcs
1.2 Suspension clamp with bracket
No. 6000 Pcs
Conductors for phases must be hard-drawn aluminum round compacted stranded with size of (120, 95&50) mm2 while street lighting conductor is 25 mm2.The neutral conductor must be of aluminum alloy (95,70&35) mm2. All cores are black (XLPE) weather and Ultra-Violet (UV) resistance insulated, in accordance to NFC Standard or equivalent.
Tension charts for the required types of cables should be submitted with the offer to cover the following design conditions:-
Cold area Hot area
Min. ambient temp............... Deg C -10 0
Every day temp.................... Deg C 20 25
Max. ambient temp............... Deg C 40 50
Wind Loading (over ice).......... (N/m2) 700 700
Ice loading (radial thickness)... (mm) 10 0
A factor of safety at min. temp. 2.5 2.5
The factor of safety at everyday temp. 5 5
The main dimensions of the low voltage twisted cable 0.6 / 1 kV
(3*120+25+70 (mm2, are as follows:)
-Main phase conductor = 120 mm2
-Construction = 19 wires- hard drawn aluminum round compacted stranded
-Insulation thickness = 1.8 mm-XLPE
-Lighting conductor construction = 25 mm2
-Construction = 7 wires - hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction = 7 wires - Non compacted
- Insulation thickness = 1.6 mm XLPE
-Approximate Nominal overall diameter of cable = 45 mm
-Nominal weight of cable per meter =1.65 kg
Main phase and lighting conductors are twisted around neutral; breaking load:
120 mm2 phase conductor aluminum = 14 kN 25mm2 lighting conductor aluminum = 2.5kN 70 mm2 neutral aluminum alloy =20.6kN
Max. D.C. resistance at 200 C:
120 mm2 phase condominium =0.253 ohm/km 25 mm2 lighting conductor aluminum =1.2 ohm/km 70 mm2 neutral aluminum alloy =0.493 ohm/km
The main dimensions of the low voltage twisted cable 0.6 / 1 kV
(3*95+25+70 (mm2, are as follows:
-Main phase conductor = 95 mm2
-Construction = 19 wires- hard drawn aluminum round compacted stranded
-Insulation thickness = 1.8 mm-XLPE
-Lighting conductor construction = 25 mm2
-Construction = 7 wires – hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction = 7- Non compacted
-Insulation thickness = 1.6 mm XLPE
-Approximate Nominal overall diameter of cable = 45 mm
-Nominal weight of cable per meter =1.357 kg
Main phase and lighting conductors are twisted around neutral; breaking load:
95 mm2 phase conductor aluminum = 14 kN 25mm2 lighting conductor aluminum = 2.5kN 70 mm2 neutral
-Lighting conductor construction = 25 mm2
-Construction = 7 wires – hard drawn aluminum round compacted stranded
-Insulation thickness = 1.4 mm - XLPE
-Neutral conductor construction = 70 mm2 AL Alloy
-Construction
Quantity Required : 21000 Piece/Pieces
Shipping Ter
Please quote for the following wholesale product requirement -
Product Name: Fasteners And Fittings
Specifications:
Like : Screws, Nuts, Bolts, washers, valves, Flanges, Couplings etc.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Maldives
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Earleton Myers
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fasteners
Specifications :
Variety: Washers, Fasteners, Etc.
Material: Steel, Brass, SS
Size: Various
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : Ex-Work
Destination Port : Doha, Oman
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Daniel
Please quote for the following wholesale product requirement -
Product Name: Screws And Channel Screw
Specifications:
Jipsum bord screw 10 cotton
Channel screw10 carton channel clips 5 carton
Quantity: as above
Quantity Required : 25 Carton/Cartons
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Asif Talib
Please quote for the following wholesale product requirement -
Product Name: Fasteners
Specifications:
Type: Nuts, Bolts, Screws
Material: Stainless Steel
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Qatar
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Khalid
The buyer would like to receive quotations for -
Product Name: Fasteners
Specifications:
Material : Steel, Carbon Steel, Alloy Steel
Like : Nuts, Bolts , Screws, Nails,
Use: Industrial
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CNF
Destination Port : Shuwaikh, Kuwait
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Ali
Buyer is interested to receive quotations for the following RFQ -
Product Name: Anchor
Specifications :
Home Decorative Brass Nautical
Material: Metal
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Qatar
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Sam Shehab
The buyer would like to receive quotations for -
Product Name: LMH Bronze Bushings Lengthen With Linear Flange
Specifications :
Hard com plated with 5 micron for steel housing
Quantity: 18 pcs as a trial and another 18 with small diameter later on MOQ
Quantity Required : 18 Piece/Pieces(sample)
Shipping Terms : CIF/FOB
Destination Port : Israel
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Shimon Koubi
The buyer would like to receive quotations for -
Product Name: Pergola Brackets Stainless Steel
Specifications:
size : 4x4 , 6x6 , 8x8
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Thailand
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Phasit Kiatjanon
Buyer is interested to receive quotations for the following RFQ -
Product Name: Washers
Specifications :
Different Material And Sizes
We Buy On An Order Basis
Email Us The Catalog And Price Offers
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Malaysia
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Punitha
The buyer would like to receive quotations for -
Product : Black Oxide Galvanized HDG Hex Head Bolt
Specifications:
Stainless Steel Bolt + nut 3/4" dia x 3" length, 24 PCS
Stainless Steel Bolt + nut 3/4" dia x 3.5" length, 32 PCS
Stainless Steel Bolt + nut 3/4" dia x 8" length, 72 PCS
Washer 3/4" dia, 256 PCSLock washer 3/4" dia, 256 PCS
quote over email and whatsapp
Quantity Required : 336 Piece/Pieces
Shipping Terms : CIF
Destination Port : Philippines, Philippines
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Engr. Marco Paolo A. Magay
