Specifications:
SZ: 30cmx40cm and 20cmx30, Ldpe Bio-degradable, 3 Color Print On Both Sides, Thick: 50 Microns, 100pcs/PKT.
1. Non-Transparent White bags (100 %
non-transparent).
2. Oxo-biodegradable material
(reverted). LDPE material.
3. Thickness of at least of 60 microns.
4. The vendor must provide the density of
the material used (g\m3) .
5. Print on both sides with Banana cut
handle.
6. Fine cutting and clear printing.
7. Ability to withhold weight at least of 6
KG with being damaged or deformed.
8. Design that needs to be printed is
shown below.
72000 pcs
Buyer is interested to receive quotations for the following RFQ -
Product Name: 20ft ISO Shipping Container
Specifications :
A. External Dimension
1) Length 20 Ft (6.10m)
2) Width 8 Ft (2.44m)
3) Height 8 Ft 6- 1/2 Inch (2.60m)
B. Internal Dimension.
1) Length 19 Ft 3 ¾ Inch (5.89m)
2) Width 7 ft 8 inch (2.34 m)
3) Height 7 ft 8-10/11 inch (2.36m)
c. Capacity
1) Gross Weight 23900 kg to 24050 kg
2) Tare Weight 1900 Kg To 2050 Kg
3) Pay Load 24000 Kg
D .free Space 1169 Cft/33.1 Cumtr
E. Design Requirements.
1) Corner Fitting All Containers Shall Be Equipped With Top And Bottom Corner Fittings.
2) Base Structure
All Containers Shall Be Equipped With And Bottom Corner Fitting
Aii Containers Shall Also Be Capable Of Being Supported Only By Load Transfer Areas In Their Base Structure. Lt Should Be As Follows:
A. Minimum 4 Pairs. One Pair At Each And Plus 2 Intermediate Pairs.
B. Intermediate Pair Should Be Between 1700mm To 2000mm
(66- 15/16 Inch To 78¾ Inch) From Each End.
C. Door each Container Will Be Provided With A Door Opening And Lock System:
(1) Width = 7 Ft 8 Inch (2.34m)
(2) Height = 7 Ft 8-11/22 Inch (2.26m)
D. Fork Lift Pockets. each Container Will Have Two Set Of Forklift Pockets As Per Following:
1) Length:
A. 14 Inch /335 Mm (large Pocket For Loaded Container)
B. 12 Inch /305 Mm (small Pocket For Unloaded Container)
2) Height (clear Opening).
A. 4 Inch /115mm (for Loaded Container)
B. 4 Inch /102mm (for Unloaded Container)
3) Distance Between Two Pockets (for The Centre Point Of The Pocket).
A. 81 Inch/2050mm (for Loaded Container)
B. 35 Inch 2/900mm (for Unloaded Container)
4) Distance From The Base Plane.
A. 8 Inch/200 Mm (for Both)
Qualifying Requirements
Each Container Will Have Following
Requirement:
A. Capable Of Stacking Eight Containers In One Stack.
