Winstrip Powergel V4 Pasty Suppliers and Manufacturers

V4 UT

V4 Premium

V4 FMC

CWS-PS is a clean label starch cold water soluble potato starch. It is gluten free, grain free, Plant based and Non GMO fine powder made from Cassava root, which is soluble in cold water and has a very good binding strength. CWS-TS is a Perfect additive for coating the nuts and snacks. CWS-TS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.

CWS-TS is a Tapioca based pregelatinized starch. It is gluten free, grain free, Plant based and Non GMO fine powder made from Cassava root, which is soluble in cold water and has a very good binding strength. CWS-TS is a Perfect additive for coating the nuts and snacks. CWS-TS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.

CWS-MS is Maize based pregelatinized starch. It is Plant based, physically modified and Non GMO fine powder made from maize, which is moderately soluble in cold water and has a very good binding strength. CWS-MS is a Perfect additive for coating the nuts and snacks. CWS-MS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.

CWS-TS is a Tapioca based pregelatinized starch. It is gluten free, grain free, Plant based and Non GMO fine powder made from Cassava root, which is soluble in cold water and has a very good binding strength. CWS-TS is a Perfect additive for coating the nuts and snacks. CWS-TS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.

CWS-MS is Maize based pregelatinized starch. It is Plant based, physically modified and Non GMO fine powder made from maize, which is moderately soluble in cold water and has a very good binding strength. CWS-MS is a Perfect additive for coating the nuts and snacks. CWS-MS also acts as Stabilizing agent in cream fillings, sauces, soup mixes, gravies, pasty creams and other food product industries.

* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

V4 Slim Submersible Pumpset

V4 Borewell Submersible Pumpset Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP) - Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. Single Phase available in 0.5 HP to 5.0 HP Three Phase available in 1.0 HP to 6.0 HP - Speed : 2880 RPM - Head Range : 10 Mtr. To 340 Mtr. - Discharge Range : 450 LPM to 12 LPM - Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0 - Degree of Protection : IP 58 - Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph - Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs, 2.2kW, 7.5 kW -1500 lbs. - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph Direct Online (D.O.L) - Maximum Starts Per Hour : 20 Times

Power (W): 7/10/12/15/20/30; Power factor: 0,9; Voltage/Frequency (V/Hz): 100-277/120/220-240; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 90/105/110; CRI (Ra): 80; Life span (hrs): 25.000; IP20; Various options: - Type 1: AC direct - Type 2: High efficacy - Type 3: 3-CCT Changeable - AC direct - Type 4: 3-CCT Changeable - High efficacy - Type 5: 3-Step Dimming - Type 6: PIR sensor; Flicker-free, EMC; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;

-Primary Ingredient: Tomato -Taste: Natural -Weight (kg): 245 kg -Additives: Non -Shelf Life: 24 Months -Product Type: Sauce -Type: JAM -Form: Pasty -Color:Red -Ingredient: 100% Purity Tomato Paste -Raw Material: Fresh Ripe Tomatoes -Processing Type: Cold Break Hot Break -Brix: 28-30%,30-32%.36-38%

Specification item value Place of Origin Thailand Hubei Brand Name Qugu or OEM Model Number 400g Brix (%) 0.9 % Primary Ingredient Tomato Taste Taste Delicious Weight (kg) 10.2 kg Additives no Packaging Bag, Can (Tinned) Certification BRC, HACCP, KOSHER, IFS Shelf Life 2 years Product Type Sauce Type Ketchup Form : Pasty Color : Red Ingredients Tomato Paste, salt Packing ; Can Smell ; Rich Tomato Aroma Purity : 60 - 100% Brand ; Oem Buyer's Brand Size : 70g - 4.5kg Packing & Delivery

name :L1388 Lamborghini net weight 23 gross weight 27 specification 108*58*31 product size 112*65*45