Product Name Weak acid cation exchange resin (Macroporous) Sanxing Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g)
Product Name Weak acid cation exchange resin (Macroporous) Bairy Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g) â?¥10.80 Total exchange capacity (mmol/ml) â?¥4.40 Shipping weight (g/ml) 0.72~0.80 True density (g/ml) 1.14~1.20 Particle size range (%) (0.315mm~1.250mm)â?¥95.0 Lower limit size (%) (ï¼?0.315mm)â?¤1.0 Effective size (mm) 0.400~0.700 Uniformity coefficient â?¤Â 1.60 Sphericity after attrition  % â?¥Â 90.00 Reference indexes in using PH range 4~14 Max. operation temperature (â??) 100 Swelling upon complete conversion (%) â?¤Â 70 Working exchange capacity (mmol/L) â?¥Â 1600 Working flow rate (m/h) 15~30
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric â?¥2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1. Description D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery.
Application: It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery. Typical physical and chemical properties: Matrix Structure Styrene series Appearance Camel to burnt brown non-transparent spherical grain Ionic form Na Moisture content (%) 45.00~55.00 Total exchange capacity (mmol/g) 4.50 Total exchange capacity (mmol/ml) 1.80 Shipping weight (g/ml) 0.77~0.85 True density (g/ml) 1.250~1.280 Particle size range (%) (0.315mm~1.250mm)95.0 Lower limit size (%) (0.315mm)1.0 Effective size (mm) 0.400~0.700 Uniformity coefficient 1.60 Sphericity after attrition % 90.00 Reference indexes in using PH range 1~14 Max. operation temperature (?) 120 Swelling upon complete conversion (%) 10 Working exchange capacity (mmol/L) 1100 Working flow rate (m/h) 15~30
Corn starch,wheat starch,maltodextrin,dried apricot,pistachio, pistachio paste,raisin,hazelnut,hazelnut paste, cocoa powder, cocoa butter, organic cocoa powder, organic cocoa bean, cocoa bean,shea butter,wheat flour,corn flour, canned tuna, sardines, fruit juice, concentrates, pulp, fruit puree, mango puree,pectin, sunflower oil, sunflower kernel, sunflower lecithin, soya lecithin, desiccated coconut, coconut virgin oil, coconut flour, red split lentil, beta caroten,glucose, glucose syrup,corn gluten meal, acetic acid, caustic soda flakes, citric acid, ethanol, monomers, phosphoric acid, ammonium bicarbonate, maleic acid, stearic acid, sulphuric acid, sulfamic acid, calcium chloride, polyol, epoxy resin, pvc resin, fluorspar,guar gum,titanium ore.Distrubution and logistics
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Product Name Gold extraction special resin Bairy Resin Article#: BRA-800 Main ApplicationGold (Au.) extraction / adsorption, it is instead of activated carbon to extract gold from from cyanide. Typical physical and chemical properties: Name of Index Index Appearance Milk white non-transparent spherical grain Leave factory type Chlorine Moisture % 50.00-60.00 Complete exchange capacity mmol/g 4. 5 Volume complete exchange capacity mmol/ml 1.20 Bulk density g/ml 0.60-0.75 True density g/ml 1.030-1.06 Particle size range % (0.6-1.50mm)95
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides. There it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2,4-D (amine), glyphosate and glufosinate herbicides.
BD001 is a premium grade, macroprous strong acid cation exchange resin, supplied in the sodium (Na) or hydrogen (H) form. It is a copolymer of styrene and divinylbenzene with sulfonic acid exchange group. The unique structure allows for high operating capacity and excellent chemical and physical stability. Its matrix promotes better kinetics and better diffusion rates into and out of the bead. It is mainly used in production of pure water, ultra-pure water and condensate polishing. It can also be used in waste water treatment and recovery of heavy metals. The series of BD001 contains four products: BD001 for general use; BD001 FC for the system of double compartment bed or floating bed; BD001 SC for dual bed; BD001MB for mixed bed, especially condensate water with high flow rate in mixed bed
BC118H is a premium grade, porous strong acid cation exchange resin. It is a copolymer of styrene and divinylbenzene with sulfonic acid exchange group. The unique structure allows for high operating capacity and excellent chemical and physical stability. Its matrix promotes better kinetics and better diffusion rates into and out of the bead. Due to the special surface area, pore size, it is used as catalysts in synthetic industry of Bisphenol-A synthesis etc.
