Vertical Submersible Pumps with extended shaft directly goes into sump or tank mainly used for solvents with motor above the ground and the whole pumps below mounting plate inside the tank. Available in Metallic as well as Non-Metallic MOC.
Flow: 15m3/h Head: 80m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 20m3/h Head: 91m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h Head: 78m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h Head: 78m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.
We are an important name in this kingdom of Vertical Openwell pumps who occupied in administering a universal series of Vertical Open Well Submersible Pump to our consumers. This Vertical Openwell Submersible Pump is manufactured with the excellent condition of substance and generally trusted in multiple applications for pumping fluid and fuel to a diverse division of industries. Consumers can avail this commodity at market commencing figures.
Overview It has many obvious advantage such as compact structure,no overload,high efficiency and energy saving,high reliability,high stability,anti-winding,no clogging,automatic coupling,automatic protection and automatic control,it has unique functions in transporting various kinds of sewage or insoluble solid-phase mixed liquids containing solid particles and sediment. The design,manufacturing and quality of this series of products comply with GB/T24674 Waste submersible motor-pumps standards,CJ/T472 Submersible sewage pump standards,and its efficiency index reaches GB32031 Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumps standards. Application This series of products are mainly used to transport various types of sewage,wastewater,rainwater,or other insoluble solid phase mixed liquids containing solid particles, sediment,fiber,and so on. The products are widely used in urban sewage treatment plant drainage system,factory commercial heavily polluted wastewater discharge,residential area sewage drainage,civil air defense system drainage,hospital and hotel sewage drainage,complete auxiliary machinery drainage for hydropower station,auxiliary drainage for water conservancy pump stations,exploration,mining supporting equipment,waterworks water supply equipment, municipal engineering,construction site,subway station drainage and other industries Working condition Outlet diameter:DN100mm-DN900mm Rated voltage:380V or 660V 3KV 6KV 10KV,etc Frequency:50Hz three-phase AC power Medium temperature: 42,density 1200kg/m3 pH value:within the range of 4-10 Volume ratio of solid phase 5% Maximum flow capacity:the diameter of the solid in the medium should not be greater than 80% of the minimum size of the impeller passage Corrosive medium requirements:The products can not be used fro pumping media that are highly corrosive or contain strong abrasive solid particles.
We are one of the concrete pump manufacturers in Korea Brand: SAMIL GIANT in Korea Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m Stationary pump, Line pump We are able to send full details if you make an inquiry
Main parameter: Capacity(flow rate): 86.4-198 m3/h Head: 9-52 meter Rate speed: 1000-2200 r/min Impeller diameter: 245 mm 1. Application: Mh series of slurry pump is a kind of cantilever centrifugal slurry pump, widely applied for pumping high abrasive and erosive slurry in thermal power generation, chemical, mining, coal mining, metallurgy, environmental protection. 2. Sealing type of slurry pump: Shaft sealing use packing seal, associated-impeller seal and mechanical seal, can be applied for different work condition requirements. 3. Structure of slurry pump: Use double shell structure, the pump body, pump cover be lined with replaceable wear-resistant metal liner or rubber liner. The pump press out opening can be rotary mounting according to eight angle to meet different installation requirements. Meanings of the model: mh75c M---------wear-resistant high chromium alloy H---------heavy type slurry pump 75------- the pump press out opening is 75 mm C -------bracket style Wooden box
Gravel and sand pumps for sales : 1.Horizontal, cantilevered, centrifugal, single stage slurry pump 2.Long bearing life: the bearing assembly is with large diameter shaft and short overhang. 3. Wear resistant and anti-abrasion wet parts: a05, a07, a33, a49 and rubber etc. They are completely interchangeable with each other 4. Easily replaceable liners: liners are bolted to the casing. 5. Easy adjustment of impeller: an impeller adjustment mechanism is provided below the bearing housing. 6. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple. Main parameter:mg150e
Hydromanâ?¢ Hydraulic Submersible Sand Pump for River Dredging is a hydraulic machinery with mixing function,designed to utilize the performance of hydraulic motor to the utmost for the site where the electric power source canâ??t be supplied. Hydraulic sand pump is suitable for conveying media containing various particle sizes of solid particles such as sediment, cinder, tailings and ore sand. Submersible hydraulic sand pump is mainly used for dredging and dredging of metallurgy, mines, thermal power plants, iron and steel, water treatment, sand mining, mining, ports, rivers, lakes and ponds; The suction and transportation of sediment media such as port construction and Hydraulic Reclamation of rivers, seas and beaches are ideal substitutes for traditional mud pumps. The whole set of equipment can be flexibly matched with other equipment, such as hydraulic station, excavator and loader, so as to break the power restriction and transfer flexibly, especially for construction in remote areas.
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine also known as stainless steel submersible slurry pump are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel, meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition. Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine Features Best structure design of submersible sand pump, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protection, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals. The stainless series submersible agitator slurry pump is suitable for all light acid, corrosive and/or sea water application fluid in pH values between 4 to 10pH. For strong acidity and alkalinity applications, please use the specified chemical vertical submerged pump. Investment Casting Precision casting with the use of an advanced stainless investment casting method that produces the highest quality with a smooth surface finish. Viton O-rings are used throughout the stainless steel submersible slurry agitator pump to give better pump life in corrosive acid and aggressive media. Austenitic Stainless Steel SS316 water application of light acid-base.
Hydroman Hydraulic Submersible Slurry Pump is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities. In addition to the main impeller, there is also an agitating impeller for the submersible slurry pump, which can agitate the slag deposited on the bottom of the water. Plus, the mixing impeller and other main flow parts are made of advanced materials, which are wear-resistant, corrosion-resistant, non-clogging, strong in sewage, and can effectively pass larger solid particles.The slag suction efficiency is high, and the dredging is more thorough. The motor of submersible slurry pumps dives into the water, without the need to construct complex ground protection and fixing devices, and the management is easier, thus to ensure high and reliable performance.
Hydroman Hydraulic Submersible Pump for Sludge Dredging Application is extremly suitable for immersions depths of up to 80m and solids handling of 120mm in suspension, and Hydraulic Sand & Slurry Pump is a highly durable and reliable sand & slurry pump for dredging and transporting solids and a variety of other materials, so mainly used for dredging, excavating, and transporting materials such as rocks, gravel, and soils. Hydroman Hydraulic Submersible Pumps for Sludge Dredging Application are also often used by construction companies who need to move large amounts of dirt or sand quickly, so hydraulic submersible excavator sand pump can continue building houses or other structures on-site without having to wait around all day long until someone else gets there with heavy equipment As hydraulic submersible solids sand pump use energy from water pressure rather than from human power or diesel engines like in different machines. So submersible hydraulic dredging sand pump have a very high efficiency compared to other lifting-heavy materials such as cranes and backhoes.
Hydroman Electric Submersible Sand Pump Description: Electric Submersible Mud Pump with Soft Stater Control Panel can handle waste water as well waste water with robust and reliable solids,there is a stirring impeller at the bottom of the submersible electric sludge pump body, which can stir the deposited sludge to form a turbulent flow and realize high-concentration transportation. compared with the general horizontal sludge pump or vertical slurry sludge pump, the submersible sludge pump has a compact structure and a small footprint.There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator. The vibration noise is small, the motor temperature rise is low, and there is no pollution to the environment. Three heat control switches are embedded in the stator of submersuble sewage slurry pump.
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump Description: Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Hydroman Electric Submersible Mud Pump Description: Hydroman Electric Submersible Mud Pump for Mining Reclamation is a versatile solids handing pump designed for Mining and Dredging applications where the water is contaminated with suspended solids such as coal fines, sand, and mud. Used to remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas as well as to irrigate farms and ranches. The submersible electric motor is protected by a superior double mechanical seal and probes to detect water ingress into the mechanical sea oil chamber. The wear parts is fitted with an integrated agitator, come breaker; this will ensure that only particles of the correct size enter the chamber, plus creating adequate flow turbulence to keep suspended solids flowing.
Hydroman Offloading Submersible Dredge Pump Description: Hydroman Offloading Submersible Dredge Pump is also called Submersible agitator dredge pumps, it is a single suction submersible sand pump that allows solid to be drawn. Submersible dredge pump is the kind of heavy duty submersible mud pump that is applied for the dredging process to transport underwater sand, slurry, sludge, gravel or other sediments to specified place.
Hydroman Submersible Sand Dredging Pump Description: Hydroman Submersible Sand Dredging Pumps are suitable to be used for pumping sand. Sand is pumped mixed with water up to 70% of solids by weight. The mixture of liquid and particles of sand and gravel is pumped in a procedure often used as a convenient way of handling sand and gravel. There are many applications for submersible sand pumps: sand and gravel extraction, dredging of rivers, harbors and marines maintenance or construction, beach reclamation, filling of Geotubes, among others. Here below you can read about some of the multiple applications of sand pumps.
Hydroman Submersible sewage sludge pump is used for civil and industrial non aggressive waste water, municipal works, industrial buildings, hotels, hospitals, civil air defense, mines etc., suitable for drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics. Especially effective in returning activated sludge in wastewater treatment works, temporary sewage bypass pumping and emptying polluted excavations or tanks, these units are robust in design and capable of delivering months of continuous operation with no maintenance requirements. Hydroman has the proven experience and submersible pumps to provide reliable and efficient solutions for handling sludge,so we can offer a complete range of high-quality submersible sewage sludge pumps made for dewatering, moving mud, clay, sludge, light slurry, tank clean-outs, trench & pond cleaning, and mining applications.
