Leading advantage Pass-through scanning: Passage scanning of passenger vehicles allows passengers and drivers to stay in the vehicle during the scanning process.control by the driver,no need extra transport. Small occupation of land: The BG-XCJ500 has a small occupation of land and does not require additional base construction. Dual-energy imaging: The BG-XCJ500 performs brake material identification and can distinguish organic, inorganic and hard-to-penetrate metal objects. can helps operators quickly identify all kinds of dangerous goods. Radiation safety: BG-XCJ500 can ensure the radiation safety of drivers and passengers (according to ANSI 43.17 international standards), while the camera equipped with the system can identify the surrounding environment and avoid scanning people outside the security screening target. Optional features: automatic car identification, vehicle detection system. Technical indicators: specification Channel size: 3 (wide) * 3 (high) meters Scanning speed: 5~10 kilometers per hour Typical throughput: 100 vehicles/hour Penetration: typical 45mm steel, 25mm steel for application Wire resolution : Diameter 1.2mm copper wire Absorbed dose: less than 0.2μsv single scan Fenced dose: Less than 0.5μsv in public area Meets IAEA standards Power Consumption: Max 2KVA Operator Station: 24-inch Single Console X-ray generator (dual energy) X ray generator: 200kv Beam Direction: Side Illumination Operating environment Operating temperature/humidity: 5°C~40°C/0%~90%(humidity) Storage temperature/humidity: -23°C~60°C/10%~90%(humidity) Power requirements: 220VAC (±10%) 50±3Hz (optional: 100VAC, 110VAC, 120VAC, 200VAC) software Operator protection :password login.; vehicle information list, data query, user management, real-time curve, playback, etc. Image function: color / black and white, increase, over increase, reverse color, organic removal / inorganic removal, brightening / dimming, zoom in / zoom out; Real-time video, real-time capture (custom); Organic&inorganic color image display;
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Two tier Galvanized double deck bike rack/bicycle rack For all types of bicycles 2 tier bike rack can accommodate all types of bicycles, such as mountain bikes and town bikes, and any bicycles can also be chained for extra security. Once placed, the bicycle is well supported by wheel channels and the back wheel is stabilised by a gutter to lock the bicycle firmly. The lower rack has a sloping wheel channel, so the user does not have to bend between the levels which makes the cycle parking system simple and easy to use for all ages. This 2 tier bicycle rack is excellent for space saving as the cycle stands are compact with a centre to centre distance of around 370 mm. There is also the option to have the powder coated in any of the 192 RAL colours. Double deck bicycle rack features: 1.This double deck bicycle rack can park 2 bikes per set(one up, one down). 2.assembled in underground garage. 3.used for public place such as hosipital, school etc. 4.beautify the environment. 5.can Save space and prevention of theft.
We have Used Scania Bogie set (Tandem) RBP 735 RPB 730 Volvo Tandem Study it in your market.
Fairly used Toyota Hilux-03 Brand Name Fairly used Toyota Hilux origin Thailand Small Orders Accepted Key Specifications/ Special Features: Model: 2018 Hilux Good Condition Body Style: Pickup Mileage: 10,000 Drive Train: AWD 4x4 Mechanical Condition: Excellent
Year 2017 Make Ford Model Ranger Body Style Utility Condition Certified Mileage 334,287 kms Drivetrain FWD Engine 3.2L Fuel Type Diesel Trim XLT Double Cab Exterior Color White Interior Color Black/Gray
Year 2020 Make Toyota Model RAV4 Body Style SUV Condition Certified Mileage 60,857 kms Transmission Automatic Drivetrain FWD Engine 2.5L Fuel Type Diesel Trim GX 2WD Exterior Color White Interior Color Black/Gray
Adaptability 1. scanning mode: automatic, non-external trigger condition scanning 2. the maximum scan rate: 18kHz 3. detection speed: 1-60km / h, recommended â?¤ 30km / h; 4. field of view angle: 170 degrees 5. scanner data cable: 10 meters; (customizable length) 6. auxiliary lighting: 160W 7. lighting components: two single sealed LED surface light source; life: 50000h 8. vehicle image scanner: the use of unique open wide-field vehicle image acquisition technology design 9. carrying weight: greater than 15T 10. waterproof level: IP68 to meet all-weather work 11. scanning device weight: 28KG 12. scanning device dimension: 450 Ã? 400 Ã? 88mm 13. communication interface: RJ45 14. storage temperature: -40 ° ~ +75 ° 15. working temperature: -10 ° ~ +60 ° 16. working voltage: 110-240V AC, 50-60HZ 17. Built-in backup power supply: The device can work through UPS backup power supply when not connected to AC power (optional)
Environmental Adaptability 1. scanning mode: linear scan, touch coil trigger; 2. through the speed: 1-60km / h, recommended â?¤ 30km / h; 3. field of view angle: â?¥ 170 degrees 4. the image vertical resolution: 2048 pixels CCD; 5. scanner data cable: 100 meters; (customizable length) 6. lighting components: four single sealed LED surface light; life: 50000h 7. Under Vehicle Image Scanner: It adopts open wide-field vehicle bottom image acquisition technology design; 8. working voltage: DC24V; 9. System power supply: AC110-240V/50-60Hz. 10. structural design: monomer seal design; 11. bearing weight: 50T 12. Scanner size: 1200*350*210mm 13. scanner weight: 180kg 14. the ambient temperature: -20 degrees - +60 degrees
Warranty: 2 years After-sale Service: Online technical support Material: metal Shelf Life:2 years Instrument classification:Class II Safety standard: none Application: Cardiology
Medtronic Endoscopic Ultrasound Beacon Fna Exchange System
we have used car available for shipment , such like Toyota , Honda , range rover , Mercedes Benz .
Walk through metal detector, x ray baggage scanner, handheld metal detector, underground metal detector, explosive detector, liquid detector, under vehicle surveillance system, vehicle and cargo inspection system.
A conveyor belt is a looped belt that is driven by and wrapped around one or more pulleys. It is powered by an electric motor and supported by a metal plate bed or rollers upon which the conveyor belt rests. The pulley that powers a conveyor belt is referred to as the drive pulley and has an unpowered idler pulley.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
