Mace
Botanical: Myristica fragrans
Family: N.O. Myristicaceae
Hindi Name: Mace - Javitri
General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia.
Geographical Sources
The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana
Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed.
Varieties -> Whole nutmegs are grouped under three broad quality classifications:
1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes.
2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%.
3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%.
Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter.
Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste
English name:Â Calcium Nitrite
Molecular formula:Â Ca(NO2)2
Molecular weight:Â 132
CAS NO. 13780-06-8
HS CODE:Â 28341000
UN NO.: 2627 5.1 type oxidizing agent
Properties:Â White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution.
Specifications:
Item Superior grade First grade Second grade
Calcium Nitrite[Ca(NO2)2Â as dry basis]% 94 92 90
Calcium Nitrate[Ca(NO3)2Â as dry basis]% <4 <5 <6
Calcium hydroxide[Ca(OH)2Â as dry basis]% <1.0 <1.0 <1.0
Moisture % <1.0 <1.0 <1.0
Water insoluble matter % <0.6 <1.0 <1.0
Uses:
1. Antifreezing agent.
2. Inhibitor of steel in concrete.
3. Can prepare compound early strength agent.
Packing 25/50/1000KG woven bag lined with plastic or according to customer's requirements.
Product Nature
Chemical name: Potassium Amyl Xanthate (PAX)
Equivalent to : Z-6, AERO 350 xanthate
Molecular Formula: C5H11OCSSK
Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form
Testing method: Lead acetate titration
CAS Number: 2720-73-2
EINECS No.: 213-180-2
Use
A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging.
Specifications
Chemical components Specification 1 Specification 2
Purity 85% Min 90% Min
Moisture & volatiles 10% Max 4% Max
Free alkali 0.5% Max 0.2% Max
Packing and Storage
120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM)
850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG
4425 Valeronitrile (Cas:110 59 8) Suppliers
Short on time? Let Valeronitrile (Cas:110 59 8) sellers contact you.
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air.
Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry.
Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers
Specifications standard : gb210.1-2004
Items : specification
First grade : specification
Second grade
Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min
Chloride content(as nacl) %0.7% max0.9% max
Iron content(as fe in dry base) /%0.003% max0.0035% max
Sulphate content(as so4 in dry base) /%0.03% max0.03% max
Water insoluble matter /%0.03% max0.03% max
Loss on ignition a/ %0.5% max0.5% max
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7
Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5, Â % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0
Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.
Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
Product Name: Sodium permanganate
Use level: Industrial
Content: 40 (%)
CAS Number: 10101-50-5
Molecular formula:NaMnO4
Molecular Weight: 141.93
Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate.
Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on.
Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place.
Quality Standard: Â
Items index
Sodium permanganate (NaMnO4) Content / (%) 40
Water-insoluble content / (%) 0.01
Potassium (K) content / (%) 0.22
pH value 6 ?8
Density / (g/cm3) 1.36 1.39
Chloride (Cl) content / (%) 0.02
3. Uses:
1) water treatment: it can be used to disinfect drink water and water in swimming pool, algae-removing in circulating water.
2) Disinfection: It can be used in disinfecting dinner, food, and dishes, or used in the prophylactic disinfection of home, hotel and public place; hygiene and disease control of hospital; or used in the disinfection of silk worm, animals, birds and fish
3) Other: It can be used in anti-shrinkage finishing of wool, textile bleaching, antimoth of paper and chlorinated agent of rubber.
4. Technical Index:
Appearance: white powder/granular
Available chlorine: 90%Min
PH (1% Aq. Solution): 2.7-3.3
Moisture: 0.5% Max
Granular Size: 8-30mesh or 20-60mesh
Package: 25kg/50kg plastic drum, 50kg fiber drum.
5. Product: According to the requirements of production from customers.
Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air.
Quality Standard
Item The National Standard
The Total Alkalinity Content(NaHCO3)% 99.0, 100.5
Loss on Dring% 0.20
PH Value(10g/1) Solution, 8.6
Arsentic Content% 0.0001
Heavy Metal Content, 0.0005
Ammonium Salt pass
Clearness pass
Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc.
Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag.
(We can meet with all your demands according with your need.)
Commodity: Ammonium nitrate porous prills
1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye.
2. Purpose:
Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields.
Commodity: Caustic Soda Flakes
Caustic Soda Pearls / Bead / Prill / Granule
Caustic Soda solid
Molecular formula: NaOH
Molecule Weight: 40
H.S code: 28151100
CAS: 1310-73-2
UN number 1823
Dangerous Class 8
We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base and external processing of flake caustic, solid caustic soda, granular caustic soda, which provide ideal condition and environment for domestic and foreign trade.
Used as a raw material in the manufacture of soaps ,detergent, textiles and paper ,and likewise ,in water softening and treatment, drilling mud in oil field, refining petroleum products, and washing beer and soft drink bottles, in food and drug industry ,it is used as acidity regulator, alkali, and so on.
Packing :Flake/pearl:25kg/plastic woven bag with PE inner
Solid :200kg/ iron drum
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one
Other Names: D-allulose, D-ribo-2-hexulose
Appearance: White Crystal Powder
CAS Number: 23140-52-5/551-66-8
Chemical Formula: C6H12O6
Molar Mass 180.16 g�·molâ??1
Melting Point 58 �°C (136 �°F; 331 K)
Function of Allucose
1. Low-calorie sugar
2. No effect on blood sugar
3. Can be part of a healthy diet
4. The taste and Texture of sugar, without all the calories
5. Contributes far fewer calories (approximately 90 percent less) than sugar
Product Nature
Chemical name:Potassium Amyl Xanthate (PAX)
Equivalent to : Z-6, AERO 350 xanthate
Molecular Formula: C5H11OCSSK
Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form
Testing method: Lead acetate titration
CAS Number: 2720-73-2
EINECS No.: 213-180-2
Use
A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of Cu/pb/ne And Pyrite,especially For The Floatation Of The Gold In Gold And Copper Mine.It Could Make Good Result In Copper And Lead Oxidized Ore.Ofeen Used In Rough Selecting And Scavenging.
Specifications
Chemical components Specification 1 Specification 2
Purity 85% Min 90% Min
Moisture & volatiles 10% Max 4% Max
Free alkali 0.5% Max 0.2% Max
Packing and Storage
120kg Iron Drum,134 Drums Per 20'fcl,16.08mt; (or 110-180kg Iron Drum)
850kg Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner Bag) 25-50kg Woven Bag
Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base
Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.
Allantoin is a non-toxic, odorless, non-irritating, non-allergic white crystalline powder, soluble in hot water, hot alcohol and diluted sodium hydroxide solution, slightly soluble in water and alcohol, insoluble in ether and chloroform. An organic solvent; a saturated aqueous solution (concentration of 0.6%) which is slightly acidic.
Allantoin has a physiological function of promoting cell growth, promoting wound healing, softening the stratum corneum protein, and restoring the skin or tissue. It is a good skin wound healing agent and can be used to relieve skin dryness, scaly skin disorders, wounds and ulcers. External skin medication
Allantoin can promote the water absorption capacity of the outermost tissues of skin and hair, prevent the water from dispersing, and make the skin soft, lustrous and elastic, so that the hair does not split or break.
Can be used as a formula cream, lotion, facial cleanser, hair lotion, hair restorer, sunscreen, lipstick, shaving cream, hemorrhoid cream, oral cavity.
Allantoin is a non-toxic, odorless, non-irritating, non-allergic white crystalline powder, soluble in hot water, hot alcohol and diluted sodium hydroxide solution, slightly soluble in water and alcohol, insoluble in ether and chloroform. An organic solvent; a saturated aqueous solution (concentration of 0.6%) which is slightly acidic.
Allantoin has a physiological function of promoting cell growth, promoting wound healing, softening the stratum corneum protein, and restoring the skin or tissue. It is a good skin wound healing agent and can be used to relieve skin dryness, scaly skin disorders, wounds and ulcers. External skin medication
Allantoin can promote the water absorption capacity of the outermost tissues of skin and hair, prevent the water from dispersing, and make the skin soft, lustrous and elastic, so that the hair does not split or break.
Can be used as a formula cream, lotion, facial cleanser, hair lotion, hair restorer, sunscreen, lipstick, shaving cream, hemorrhoid cream, oral cavity.
FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes.
PRODUCT COMPATIBILITY:
FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel.
PRODUCT APPLICATIONS:
FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids.
Specifications:-
PRODUCT : FH-35 FH-38 FH-42
CAS No. : 9000-30-0 9000-30-0 9000-30-0
Granulation : FINE FINE FINE
APPEARANCE : OFF WHITE POWDER
MOISTURE : 8% Max. 8% Max. 8% Max.
PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max
ASH : 1.5% Max. 1.5% Max. 1.5% Max.
ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max.
CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min
pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5
VISCOSITY :
(0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42
5 Mins : 37 5 Mins : 39 5 Mins : 43
30 Mins : 39 30 Mins : 42 30 Mins : 45
60 Mins : 40 60 Mins : 43 60 Mins : 47
4425 Valeronitrile (Cas:110 59 8) Suppliers
Short on time? Let Valeronitrile (Cas:110 59 8) sellers contact you.
