HNC-310 non-addressable heat detectors are suitable for connection to 2-wire non-addressable fire detection control
And indicating equipment, or to addressable fire detection control and indicating equipment that can accept
Non-addressable type detectors.
An electronic thermistor provides sensitive rate-of-rise operation or fixed-temperature operation when the response
Threshold value is exceeded.
Durable heat sensor
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
Dual leds for 360° visibility
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment
Hna-360 analogue addressable heat detectors are microprocessor controlled state-of-the-art detectors
Compatible with popular control and indicating equipment loop protocols.
An electronic thermistor sensor provides sensitive rate-of-rise alarm operation, or fixed-temperature operation
When the response threshold value is exceeded.
Durable heat sensor
Analogue detection discrimination
Dual leds for 360° visibility
Dc 24 v operation
2-wire connection to many popular loop protocols
Dip switch address setting
125 usable detector address settings per loop
Optional remote led output
FOB TRANSACTION PROCEDURES
1. Buyer Issues ICPO, Company Registration Certificate and Tank Storage Agreement(TSA)for
seller approval.
2. Seller issues COMMERCIAL INVOICE (CI), STATEMENT OF PRODUCT AVAILABILITY, and
COMMITMENT to SUPPLY the available quantity in the Storage Tank and then program the
injection. THIS USUALLY DEPENDS ON THE LOCATION.
3. Buyer countersigns Commercial Invoice (CI) & Warning Letter with NCNDA/IMFPA signed
by all Buyer groups with commission structures.
4. Send the below proof of product (Documents) via email If Necessary.
Fresh SGS (Q&Q report) less than 48 hours.
Tank storage receipt. (TSR).
Authorization to verify (ATV).
Injection report Shore Tank (IR).
Certificate of Origin.
Product passport.
Authorization to Sell and collect (ATSC).
5. After the successful verification of the product existence, buyer order SGS to conduct their
Dip-Test in the seller tank on buyer expense and then issues buyer.
â?¢ Unconditional Dip Test Authorization (UDTA).
â?¢ ATSC authorization to Sell/Collect.
â?¢ Title of Ownership Certificate, (on seller expense).
6. Upon the successful dip test, Buyer presents their tank storage receipt (TSR), Seller issues
all export Documentation.
7. Buyer makes payment by MT103 or TT wire transfer for the total product and lifts the
product and seller pays all Intermediary involved on the transaction.
JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur.
Specification
Product name Original Premium Wood Pellet line EN Plus-A1 Wood Pellet Packed
Material Hard wood
Moisture 0%
Calorific Content 4000 - 4900 Kcal/Kg
Density 600-800Kgs/CBM
Length 30 - 50mm
Diameter 6 - 8mm
Packing 15kg Plastic Bag
Usage Cooking Fuel - Heating System
BRAND As Customer Requirements
2998 Ul And En Approved Heat Detector Suppliers
Short on time? Let Ul And En Approved Heat Detector sellers contact you.
Cooper & Hunter 28000 BTU Tri 3 Zone 9000,12000 Ductless Mini Split Air Conditioner
Heat Pump Heater Full Set with 25ft Installation Kits
Inverter Compressor: Yes
Remote Controlled: Yes
WiFi Enabled: Yes
Functions: Heating, Cooling, and Dehumidification
Product Dimensions: 48"D x 40"W x 40"H
Energy Star Certified: Yes
Seasonal Energy Efficiency Ratio (SEER): 23.8
Color: White
Voltage: 230 Volts
Noise Level: 24 dB
Cooper&Hunter 28,000 BTU Ductless Mini Split Air Conditioner Heat Pump: Features a 23.8 SEER rating and includes three wall-mounted air handlers (two at 9,000 BTU and one at 12,000 BTU) for efficient heating and cooling.
Smart Port Adapters: Control each air handler individually from anywhere using your smartphone and the C&H Remote app.
Electrical Specifications: Operates on 208-230V, UL listed, and AHRI certified. Capable of heating in ambient temperatures as low as -13F.
Whisper Technology: Provides quiet operation, making it ideal for bedrooms, additions, living rooms, and commercial applications.
Installation Kits Included: Each air handler comes with installation kits, including a 25 ft. pre-flared and insulated copper line set, 25 ft. communication wires, small accessories, and a 16 ft. drainage extension. Professional installation is required.
Customer Support: Experienced US-based technicians are available for assistance if needed.
Delivery Information: Due to the system's size and weight, it is shipped palletized via freight delivery. An appointment for delivery is required, so please verify your contact details before ordering. Lift-gate service is included, and residential orders are delivered curbside only.
!!!!!!!!!!!!! PLEASE SEND US YOUR INQUIRY FOR BEST PRICES!!!!!!!!!!!!
Grade C Si Mn P S Ni Cr Mo Cu N Ti
SUS301 015
100
200
0045
0030
6080 1618 025
Mechanical Properties
Grade State Hardness HV Yield Strength Tensile Strength Enlongation
SUS301 ANN 250
205
520
40
14H 250310 470
780
35
12H 310370 510
930
10
34H 370430 745
1130
5
H 430490 1030
1320
3
EN 490550
1275
1570
Surface Finish
Surface Finish Definition Application
2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster
Medical equipmentFood industryConstruction materialKitchen utensils
BA Those processed with bright heat treament after cold rolling
Kitchen utensilsElectric equipmentBuilding construction
NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001
Kitchen utensilsBuilding construction
NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Kitchen utensilsBuilding constructionMedical equipment
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Building construction
NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling
Chemical tankpipe
430 Stainless Steel Strip Specifications
Grade: 430
Standard: ASTM/EN/JIS
Thickness: 0.03mm-5.0 mm
Width: 8.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
430 Stainless Steel Strip Introductions
430 stainless steel strip is a general purpose stainless steel with good corrosion resistance.
It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.
Due to addition of stabilizing element titanium, it has good mechanical properties of welding.
Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower.
430 Stainless Steel Strip Applications
430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware.
430 Stainless Steel Strip Chemical Composition
The chemical components of grade 430 stainless steel strip is summarized in the following table:
Grade Standard C Si Mn P S Cr Ni Mo
430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
As a trusted online platform Aromas Oils has earned a renowned position in the global market for supplying pure and organic Helichrysum Essential Oil Our company is USFDA approved ensuring adherence to strict regulatory rules throughout the manufacturing and packaging processes We stand as a leading helichrysum oil supplier serving the UK US and various countries worldwide
Botany
The Helichrysum an annual flowering plant is a shrub reaching a height of 6090 cm and belongs to the Asteraceae family Its silvergreen fragrant leaves are often utilized for oil extraction while its bright dark yellow flowers resemble daisies
Overview of Helichrysum Essential Oil
Extracted from the plants flowers through steam distillation our helichrysum essential oil is a freeflowing watery fluid ranging from pale yellow to red in color
Helichrysum Essential Oil Benefits
Helichrysum oil obtained by our manufacturers offers numerous benefits
Relieves coughs and spasms
Aids in clearing blood clots by thinning them
Decreases body temperature and fights fever
Provides relief to the respiratory system
Helichrysum Essential Oil Uses
Our oil finds versatile applications
Used in ointments for wound healing
Incorporated as an antiaging ingredient in skincare products to tighten the skin
Diffused for creating a fragrant home or office space
Added to antiperspirants colognes and perfumes for aromatic notes
Blended in aromatherapy oils for skin rejuvenation
Given its widespread usage globally helichrysum oil wholesale suppliers ensure its availability in various regions
Blends well with
Helichrysum essential oil complements Bergamot Tea tree Chamomile Rose and Lavender These oils are readily available from helichrysum oil suppliers for blending purposes
Precautionary Measures
For safe usage we recommend the following precautions
Pregnant ladies should avoid using this oil unless recommended by their doctor
Ensure the bottle is tightly sealed after use to preserve its fragrance
Storage Instructions
Transfer the essential oil from Aromas Oils received in aluminum containers to amber dark glass bottles Store them in cool dark places away from sunlight and heat to preserve their essence until expiry
Locations Covered
As a Helichrysum oil bulk supplier we deliver products globally including the UK US Canada Australia New Zealand South Korea China Taiwan Thailand Vietnam South Africa France Spain Poland Romania Serbia and other countries
Documents Available on Request
As wholesale manufacturers we provide the following documents upon request
Certificate of Analysis CoA detailing product specifications
Gas Chromatography GC illustrating ingredients and their percentages
Mass Spectrometry MS providing details about constituents and their proportions
Botanical Name Helichrysum italicum CAS 8023958 Color amp Odor Pale yellow to yellow liquid amp Burnt sugar and a floral mint odor FEMA 2592 Methods of Extraction Steam Distilled Constituen
Class A1 Pine Wood Pellets 6mm DIN+ plus & ENplus A1/A2 ( BSL Approved Wood Pellets In 15kg bags )
We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in
Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous.
Excellent Wood Pellet Standard
Ash amount: 0.7% max
Moisture: 10% max
Diameter: 6 mm-8mm
Length: 10mm-50mm
Made from pure wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density: 650kg/m3 min
calorific value: 4100 to 4500 kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers
choice with desired logo.
We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in
Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous.
Excellent Wood Pellet Standard
Ash amount: 0.7% max
Moisture: 10% max
Diameter: 6 mm-8mm
Length: 10mm-50mm
Made from pure wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density: 650kg/m3 min
calorific value: 4100 to 4500 kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers
choice with desired logo.
