Product Description Prevents over pressurization of scuba cylinders.
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Key Features: * Robust Construction: Made from premium single wall corrugated cardboard, these boxes are strong enough to protect your items during transit and storage. * Lightweight Design: While offering sturdy protection, the single wall design keeps the boxes lightweight, reducing shipping costs and making them easy to handle. * Eco-Friendly: Crafted from recyclable materials, our cardboard boxes are an environmentally friendly choice, supporting sustainable practices. Versatile Use: Ideal for shipping, moving, and storing a wide variety of items, these boxes are perfect for both commercial and personal applications. * Customizable: The plain brown surface is perfect for labeling and customization, allowing you to add branding, handling instructions, or any other necessary information. Specifications: Article number: CCB-3P-BR/WH Dimension (L x W x H): As per customer requirements Thickness (mm): 2-5 mm, A-Flute (4.7 mm), B-Flute (2.5 mm), C-Flute (3.6 mm), E-Flute(1.5 mm) Grammage (Weight): 125-200 g/m�² (grams per square meter) ECT (Edge Crush Test) ratings: 32 ECT (225 kPa) to 44 ECT (304 kPa) Burst Strength: 1378 kPa (200 psi) to 1896 kPa (275 psi) Construction: Fefco 0201 Weight (kg): Based on dimensions Board grade (Number of ply): 3 Weight holding capacity (kg): Up to 10-20 kg (Depends on box size & shape, flute and grammage) Color: Brown/White Printable: Yes Origin: India/China Degradable & Recyclable: 100% Ideal For: * E-commerce businesses * Retail shipping * Moving and storage * DIY projects and organization
Neodymium magnet,sintered ndfeb magnet, permanent magnet,segment magnet,smco magnet,magnetic assemblies,rotor magnet,motor magnet,linear magnet, magnetic coupling industrial magnetic components, magnet for wind energy components, pot magnet,ndfeb magnet,segment magnet,block magnet,disc magnet,ring magnet,rotormagnet,motor magnet,magnetic coupling,magnet cupule ,magnetic holder,hook magnet,permanent magnet, ferrite magnet,magnet filter,magnet sensor,neo magnet.
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N38,45H,N40SH,N42SH,N33UH,N33EH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N54 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : 45M,38H,N40SH,N33UH,N35EH Tolerance in size : +/-0.1 mm
Product name : pot magnet Custom Super Strong permanent N50 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N38,N40,N42,N45,N48,N50,N52 Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent 48H Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N38SH,N42SH,N35UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N35 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N38,N40,N42,N45,N48,N50,N52 Tolerance in size : +/-0.1 mm
Product name : Ring magnet,Custom Super Strong permanent 40H Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N38M,N40H,N35SH,N30UH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N48 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N40,N48,N40M,N42M,N38H,N35SH,N42SH,N33UH,N35EH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent 35H Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N38,N42,N42M,N48M,N42H,N45H,N35SH,N40SH,N33UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Sensor magnetCustom Super Strong permanent 35M Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35M,N40M,N45M,N42H,N48H,N35SH,N40SH,N33UH,N33EH Tolerance in size : +/-0.1 mm
Product name : rotor magnet,Custom Super Strong permanent 35UH Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Disc magnet, Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N52,48M,N45SH,N35UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Disc magnet,Custom Super Strong permanent N35 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N45,N50,N40M,N48M Tolerance in size : +/-0.1 mm
Product name : Disc magnet,Custom Super Strong permanent N38 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N38,N40M,45H,N42SH,N45SH,N35UH,N35EH Tolerance in size : +/-0.1 mm
Product name : rare earth magnet,Custom Super Strong permanent N38 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N42,N50,N42M,N48M,N40H,N45H,N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
Product name : block magnet,Custom Super Strong permanent N45 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N45,N48,N50,N52,N42M,N48M,N35H,N40H,N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
