Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2 3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances. Tobee offers ZWZ, SKF, TIMKEN, NSK, FAG, NTN brands for different options.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances. Tobee offers ZWZ, SKF, TIMKEN, NSK, FAG, NTN brands for different options.
Slurry Pump Bearing basic part number is 009, its function is to constrain shaft to only rotation in bearing housing., Normally, The slurry pump will use 2~3 rolling bearings, It is lubricated by grease or thin oil, The bearing uses spheres or small cylinders that rotate or roll between a shaft and other mating parts to reduce friction and allow much tighter mechanical tolerances. Tobee offers ZWZ, SKF, TIMKEN, NSK, FAG, NTN brands for different options.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization. This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
8/6E-AH Slurry Pump SPECIFICATIONS: Size: 8" x 6" Capacity: 360-828m3/h Head: 10-61m Speed: 500-1140rpm NPSHr: 2-9m Eff.: 72% Power: Max.120kw Handling solids: 63mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6x4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids. Design Features: Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely. Interchangeable anti-abrasive wet parts made of high-chrome alloys. The discharge branch can be oriented to any eight positions at the interval of 45 degrees. Various drive types: DC (direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control etc. The shaft seal uses the packing seal, expeller seal and mechanical seal.
Tobee 14x12ST-AH Slurry Pump is made for high wearing and heavy duty applications. 14x12 slurry pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the toughest and most abrasive applications. Design Features: Power End Labyrinth bearing isolators to protect internal components during wash-down cycles. Clearances can be easily adjusted to maintain efficiency while optimizing performance and extending wear life. Over-sized, self-aligning spherical roller bearings for trouble free operation. Heavy duty bearing assembly, 50,000 hour minimum L10 bearing life, Distortion free bearing clamp system ensures maximum bearing life and prevents premature fatigue.
Tobe 16x14TU-AH Slurry Pumps provide a ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application need to transport heavy duty abrasive and corrosion medium. Design Features: Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime Ductile iron fully lined casing provides durability, strength, safety, and long service life Large diameter, slow turning, high efficiency slurry pump impellers designed to achieve maximum wear life and low operating costs Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life Minimal shaft/impeller overhang reduces shaft deflection and increases packing life Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the slurry pump, resulting in reliable operation and prolonged bearing life
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Specifications: Size: 8" x 6" Capacity: 360-828m3/h Head: 10-61m Speed: 500-1140rpm NPSHr: 2-9m Eff.: 72% Power: Max.120kw Handling solids: 63mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc Design Features: Bearing assembly - large diameter shaft with short overhang contributes to long bearing life. Liners - easily replaceable liners are bolted, not glued to the casing for positive maintenance. Casing - Casing halves of cast or ductile iron provide high operating pressure capabilities. Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization.
Product name THM-3C slurry pump Type THM pump size 4/3 Capacity 86.4-198m3/h Head 9-52m Allowable Max. Power 30kw Speed 1000-2200r/min NPSH 4-6m Introduction Model Explanation and Performance Chart: THM-3C T: Tower pump H: High Concentration M: Metal lined 3: Discharge size (inch) C: Frame type with maximum power Introduction of Slurry Pump ---- THM Series THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The features of this kind of slurry pump The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance. Main application of this kind of slurry pump This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. Pump Model THM Series Impeller Dia. Allowable Max.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. ¦Ç% NPSH (m) m3/h l/s THM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 THM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 THM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 THM-3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 THM-3D 60 THM-4D 60 162-360 45-100 12-56 800-1550 65 5-8 365 THM-4E 120 THM-6E 120 360-828 100-230 10-61 500-1140 72 2-9 510 THM-6R 300 THM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686 THM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762 THM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965 THM-14ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 exported wooden crate
Description Horizontal slurry pump range offer to use in mining, chemical, and industrial applications widely. The pump is designed for heavy duty applications such as mill discharge, process plant, and tailings, high pressure pipelines, as well as other specialty applications. The pump provides excellent wear life while maintaining high efficiency during its wear cycle. It helps the new building plant to start production and recover their cost in a short time with the minimum investment. Not only our own brand slurry pumps but also it could be interchangeable with other brands on spares and whole pumps. We have stock on some regular spares. It saves the users' cost on stock and increases their supply chain's efficiency. Key Features Bearing assembly - The large diameter shaft with famous brand bearings contributes to long working life. Liners-Easy to replace and maintain. Hard metal liners are completely interchangeable with rubber or PU. Casing-Cast iron or ductile iron casing provide high operating pressure capabilities and extra protection on the safety. Impeller-Hard metal and moulded elastomer impellers are completely interchangeable with each other. High efficiency and high head designs are also available. And the arge particle is easy to pass through. FAQ: 1. Are your pump and spares interchangeable with other brands? Yes. 100% interchangeable, whatever the material, working life and working efficiency. 2. What price of your pump and spares? Our price is 30~50% of the original but the same working life. 3. What is your lead time? Some popular spares are in stock which could deliver within 5 days after your PO. If without stock, we could deliver within 3 weeks. 4. What is your warranty? One year for the whole pump except the wear parts. The working life of wet parts is the same as the most famous brand. 5. Do you have OEM service? Yes. We offer OEM service to our clients. And our engineers could train the users on site how to start, use and maintain the pumps.
Hydroman Hydraulic Slurry Pump Description: Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Hydroman Hydraulic Slurry Pump Description: Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations. Hydraulic Slurry Pump with Agitator for Pumping Sand
Tobee is committed to improvement of slurry pump spares continues with the introduction of the Hyperchrome alloy material. Slurry pump spares have direct connection with slurry, are very crucial to the service life of slurry pumps. The slurry pump spare parts include slurry pump impeller, slurry pump liners, slurry pump throatbush, slurry pump frame plate liner insert, slurry pump casing, slurry pump shaft, slurry pump shaft sleeves, slurry pump bearing assembly etc, They are very easily worn-out components because the slurry pump spares work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of slurry pump spares, the material plays an important role here.
As a premium slurry pump manufacturer, we are committed to providing customers with pumps that fully meet ISO9001. Our supeior capabilities and competitive strengths are ideally placed to supply the optimum all kinds of slurry pumps for your business. These pumps can be driven by electric or diesel. Tech-macro AH series Pump Specification: Size range (discharge) : 1 inch to 18 inch (25 mm to 450 mm ) Capacities: to 5,000 m3/hr (to 22,000 gpm) Heads(TDH): to 73 m (to 240 feet) Hard metal slurry pump is successfully applying the range within a wide variety of market sectors and applications; a few of which are specified below: Mining and mineral processing Power generation and steel Aggregate and mineral slurries; mineral and ore processing; cyclone feed and under-flow; tailings disposal; lime and clay slurries; classifier under-flow; dewatering, washdown and sluicing; high density slurries and sludges; highly abrasive solids in suspension; coal preparation; coal and ash slurries; metal waste separation/Recovery Industrial effluents and liquors All abrasive slurries and sludges; abrasive chemical and process liquors; hard solids entrained liquors; sand filter recovery; beach(sand) recovery/ dispersal.
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
