TF - Parallel Shaft Helical Geared Motor This series is compact and easy to mount. Flange-, foot- and hollow shaft-mounted versions, or combinations of these mounting options are available. These gearboxes are of a modular design. Output shaft and flange can be mounted to standard hollow-shaft gearboxes without modification of the gearbox. The housing has mounting points on both sides, allowing mounting from either side. The hollow-shaft gearboxes have new mounting options also for the input side. Input possibilities are standard (IEC B5 or B14), direct coupled or with solid input shaft. A combination with other gearbox types is possible with minimum change. In applications where efficiency and strength are important, hollow-shaft gearboxes are preferred to worm gearboxes. Hollow-shaft gearboxes can withstand higher overhung loads than other gearbox types.
Specifications:
Power Range: 0.12110KW
Transmission Ration Range: 3.7722289
Output Speed: 0.04752 r/min
Output Torque: Top to 21477 N.m
Features:
Highly Standard Modular Designed
Quality Material Ensures Product Reliability
Wide Scope Transmission Ratio With Fine Division
High Strength, Compact Dimension
Long Service Life
Low Noise
High Efficiency
Large Radial Loading Ability
Axial Load Ability Of Up To 5% Of Radial Load
Type and Models:
Structure Form
F Series Foot mounted with solid output shaft
FF Series B5 flange mounted with solid output shaft
FA Series Shaft mounted with Hollow output shaft
FAF Series B5 flange mounted with Hollow output shaft
FAZ B14 flange mounted with hollow shaft
FH With Hollow shaft & Shrink Disk
FHF B5 flange-mounted with hollow shaft & Shrink Disk
FHZ B14 flange-mounted with hollow shaft & shrink disk
FAT/FHT Altered type by adding torque arm and other accessories on FA/FH type
F..SZ..AD Series Input shaft type to instead of motor
F...R Series Combined types of series F and R to reach very big ratios.
Customized Professional technical team offer customized design and item.
Application Examples
Belt Conveyor Drives
Bucket Elevator Drives
Agitator Drives
Hoisting Gear Drives
Travelling Gear Drives
Paper Machine Drives
Dryer Drives
Water Screw Drives
Specifications:
Power Range: 0.12110KW
Transmission Ration Range: 3.7722289
Output Speed: 0.04752 r/min
Output Torque: Top to 21477 N.m
Features:
Highly Standard Modular Designed
Quality Material Ensures Product Reliability
Wide Scope Transmission Ratio With Fine Division
High Strength, Compact Dimension
Long Service Life
Low Noise
High Efficiency
Large Radial Loading Ability
Axial Load Ability Of Up To 5% Of Radial Load
Type and Models:
Structure Form
F Series Foot mounted with solid output shaft
FF Series B5 flange mounted with solid output shaft
FA Series Shaft mounted with Hollow output shaft
FAF Series B5 flange mounted with Hollow output shaft
FAZ B14 flange mounted with hollow shaft
FH With Hollow shaft & Shrink Disk
FHF B5 flange-mounted with hollow shaft & Shrink Disk
FHZ B14 flange-mounted with hollow shaft & shrink disk
FAT/FHT Altered type by adding torque arm and other accessories on FA/FH type
F..SZ..AD Series Input shaft type to instead of motor
F...R Series Combined types of series F and R to reach very big ratios.
Customized Professional technical team offer customized design and item.
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing(Selection)
Dual stage coupling(Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter(metal) applied.
GO HOME(emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets(Flat type, Customized)
CENTA Flexible coupling
Class
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing(Selection)
Dual stage coupling(Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter(metal) applied.
GO HOME(emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets(Flat type, Customized)
Class
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Industrial : Water Pump, Sand Pump
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing (Selection)
Rubber block coupling (Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve (12V, 24V optional)
Mechanical trolling valve
Mounting brackets (flat type, customised)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve (12V, 24V optional)
Mechanical trolling valve
Rubber block coupling
Mounting brackets (Flat Type, Customized)
Key features
Power from the engine can be extracted without a clutch.
DIS is a flange housing with internal taper bearing support to protect engine crankshafts from the reaction forces coming from high-angle cardan shaft connections.
Flexible couplings protect the powertrain system.
Application
Useful for devices generated by engine
Support to Drive V-drive in distance
Drive for Compressor (air/gas)
Suitable for fire pump, generator
PHB - Twin Shaft Bevel Helical Geared Motor consists of helical-geared industrial gear units with bevel stage input. Input and output shafts are perpendicular. PHB - Twin Shaft Bevel Helical Geared Motor is optimized for power density to achieve the highest rating at the smallest possible dimensions. But because high power density also means increased thermal load, the new products are provided as standard with various cooling options. Efficiency is further enhanced through the use of high-grade lubricants and sealings. Another advantage is the wide range of mounting possibilities: The units can be mounted on any side, directly to the motor flange or to the output flange, greatly simplifying their installation. Because these gear units can be mounted on any side, additional equipment, such as integrated or external forced lubrication or oil expansion tanks are available as accessories. We also offers tailored solutions for specific applications. Our standard range includes reinforced bearing arrangement or extended bearing distance for high radial load or agitator applications, backstops for single-direction applications such as conveyors or elevators, brakes for hoisting or moving applications, and shrink disks for alternating loads. Special solutions for extruder applications are provided for each size and ratio.
With their high efficiency in both directions of rotation and at any input speed, these right-angle gear units are very energy-efficient. Their high-endurance gearing is wear-free and lasts a gear unit's lifetime.
JH series gear reducers for cement kilnsare involute cylindrical gear units with parallel shafts which has four reduction stages.This series has four basic structure including over 50 types.Thanks to the standardized,series and modulated design,the reducers can be manufactured according to standard or specific requirements at customers'choice with good reliabiity and maintenance.
Specifications:
Power range: 0.12160kw
Transmission ration range: 1.6521221
Output speed: 0.05809 r/min
Output torque: top to 36000 n.M
Features:
highly standard modular designed
quality material ensures product reliability
wide scope transmission ratio with fine division
high strength, compact dimension
long service life
low noise
high efficiency
large radial loading ability
axial load ability of up to 5% of radial load
Type and models:
Structure form
R seriesfoot mounted units, with two or three stages helical gears.
Rf seriesb5 flange mounted units, with two or three stages helical gears.
Rx seriesfoot mounted units, with single stage helical gears.
Rxf seriesflange mounted units, with single stage helical gears.
Rm seriesflange mounted helical geared motor, with extended bearing housing.
R..Sz..Ad seriesinput shaft type, altered unit connected by input shaft to instead of motor.
R..R seriescombined unit of two different types, to realize very big ratios.
Customizedprofessional technical team offer customized design and item.
The variable pitch gear box is an important part of the fan variable pitch system, its main function is to increase the torque of the variable pitch motor on the variable pitch bearing, drive the blade to change the blade pitch Angle at different wind speeds, so that the blade is in the best state of absorbing wind energy, and can drive the blade feathering brake when the wind speed exceeds the cutting wind speed, so as to ensure the machine to run efficiently and smoothly.
The variable gear box transmission mechanism is composed of multiple planetary gear trains, usually 3 stages, and the planetary transmission form is NGW type.
9276 Tf Parallel Shaft Helical Geared Motor Suppliers
Short on time? Let Tf Parallel Shaft Helical Geared Motor sellers contact you.
