Tempered Glass For Automobiles Suppliers and Manufacturers

Tempered glass for automobiles

Automobile Window Glass Duratuf Glass Industries (P) Ltd. Most vehicles on the road contain tempered glass in their side, rear and roof window openings. In accidents, this tempered glass shatters and breaks, causing lacerations and other injuries and opening up portals through which occupants can be fully or partially ejected. While the auto industry has long ignored the obvious dangers posed by the use of tempered glass, the tide is now changing and the glass defect should no longer be overlooked. The widespread use of tempered glass for vehicle side windows, rear windows and sunroofs should no longer be considered acceptable design practice. The expanding usage of laminated glass in high-end, luxury vehicles not only is making clear the benefits of laminated glass, but also the ease with which laminated glass could be substituted for tempered glass in passenger cars, pickups and SUVs. In a collision, when tempered glass breaks, the entire piece of glass shatters and flies about. When this happens, the flying glass can cause lacerations and other injuries and the window opening becomes a potential portal of ejection. LAMINATED GLASSES Size ranging from thickness 4.96 mm to 80 mm Max Size : 8ft X 6ft

Mini glass tempering furnace is used for producing small-size flat tempered glass for architecture, and multi-curvature bent tempered glass for automobile, shower cabins and kitchen, etc.The type of sheet glass including float glass, coated glass, tinted glass, soft low-e glass etc.

Automobile glass, laminated windshield, tempered glass..

Toughened glass is a safety glass that has undergone processes of controlled thermal treatment to increase its strength. Also known as 'Tempered glass', toughened glass is made from annealed glass that has been heated to approximately 650â?°C and then rapidly cooled, making it four times stronger than ordinary glass. Due to the increased heat treatment and rapid cooling of the glass, the treatment produces different physical properties. This results in compressive stress on the surface and improved bending strength of the glass. Before toughening, the glass must be cut to the correct size or pressed to shape. The Process of Toughening The glass is carried by rollers and goes through the furnace. Three types of modes are used to heat the glass - conduction, convection, and radiation. While the rollers help to conduct the heat, the coils enable radiation of heat. This ensures that the glass is evenly heated on every side. By blasting air on both the surfaces, the heated glass is then cooled uniformly.

Glorious Future Glass has been dedicated to production and sale of the building safety glass for architecture and residences area, including Low- e glass, insulated glass, coated glass, laminated glass, tempered glass, silk- screen glass, flat- bending and tempering glass, fire- resitant glass, heat soaked glass, locomotive glass, half- mirror, anti- slip glass, shower door glass, pool fencing glass, balustrading glass, skylight glass etc. Product Information Basic Information Product Name Toughened Glass / Tempered Glass Thickness Customized Size Customized Type Large or normal size glass panel Color Customized Packing Safety Sea - worthy Wooden or Plywood packing Delivery Time Shipped within 15 days after receive deposit Payment Term T/T, Western Union, etc Shipping Sea, Air, Express Certification CCC, ISO9001, EN, AS/NZS2208, SGCC, IGCC Application Doors and Windows, Bathroom, Indoor Partition, Daylighting Ceiling, Furniture Glass, Guardrail Glass, Fence Glass Characteristics of Toughened/Tempered Glass Toughened glass compared with equal to the height of float glass, high resistance to bending and impact resistance strength of 4-5 times Not easily broken when we choose, the glass broken into smaller particles obtuse Angle after fragments, won't cause harm to human body Safety glass, which are widely used in mechanical strength and higher security requirements, such as glass door, curtain wall, indoor partition, elevator, showcase, building primary side window, furniture appliances, etc Security, impact strength and thermal stability as well as flat tempered glass, its high wind pressure strength and immunity performance than tempered glass, safety glass Properties of Toughened/Tempered Glass Properties Toughened/Tempered Glass Thermal Shock Resistance Up to 250�°C Mechanical Strength Four to five times stronger than annealed glass Tensile Strength 65 MPa Bending Strength 120 - 200 N/mm2 Surface Compression > 95 MPa Design Stress for Architectural Purposes 50 MPa Fragmentation Small round crystals Conducive for Processing Cannot be cut after Toughening

Tempered Glass also called toughened glass is a heat toughened safety glass.It has undergone a special heat treatment increase its strength and resistance to impact.In fact,tempereded glass is approximately four times more resistant than normal glass. Rongke Tempered Glass is made by "landglass"toughening furnace which is famous of producing high quality glass.Meanwhile,we can arrange to processed as your order. Rongke Tempered Glass could goes back to all the time to 20 years ago when china was building it's infrastructure.From then on Rongke Tempered Glass was widely used in various domestic building. PRODUCT NAME Tempered Glass TECHNOLOGY Toughened FUCTION Sound proof, Heat controll, High strengh, Safety glass EDGE Polished or Customized COLOR * Clear Glass * Blue (Dark Blue, Ford Blue, etc.) * Green (Emerald Green, F Green, etc.) * Tinted ( Gold Tinted, Euro Bronze. etc.) * Grey ( Light Grey, Silver Grey, Dark Grey, etc.) * Champagne * Multiple Color options THICKNESS 3mm-12mm or customized NORMAL SIZE 914x1220mm,1524x 2134mm, 1220 x 1830mm, 1830 x 2440mm, 2140/2250/2440x 3300/3660mm or customized. APPLICATION * Architectural Facades * Automobile Industries * Safety Glass * Partitions, Shop Fronts, Show Cases * Residential Printed Glass * Silk-screen Printed Glass * Table Tops, Shelves, Consoles, Folding Screens DELIVERY 7-15 days after receive your deposit FEATURE Once breakage occurs,the glass disintegrates into small cubical fragments,which are relatively harmless to human body PACKING * Interlayers paper between two sheet * Fastening with plastic belts. * Wrapping with film. * Packing with fumigation wooden or plywood crate. * Fastening the wooden crate with metal belts. SAMPLES Free samples PAYMENT T/T,L/C

Tempered glass Tempered glass , pattern glass , shower room Shower Glass And Door Wooden crate

Tempered glass is produced by heating float glass to its softening point and then suddenly cools down to form compression in the surface layer, which make toughened glass has surface pressure stress over 90Mpa and heat-strengthened glass has surface pressure stress 24-69MPa Application: widely used in the area which has a high standard for mechnical strength and safety. doors,building wall,facade window, greenhouse Main specs: Max size(mm):2440 x 6000 Min size(mm):300 x 300 Thickness(mm):3-19 wooden case

Flat Tempered Glass: Max 3300*15000mm;Min 85*245mm Bent Tempered Glass: Max 3660*2440mm,Min 600*400mm Min Curvature of Bent Tempered Glass: 1200mm Thickness: 4-19mm Glass Type: Clear,Tint,Patterned,AcidEtched,Ceramic Frit/Silk Screen, Laminated Process: Complete tempered; Heat Strengthened; Heat Soaked, Grind edgework, Polished Edgework/Louvre,Hole, Cutouts Productivity: 1.8 million m2/year PLYWOOD END CAP/CRATE,METAL END CAP,PAPER BOX,A FRAME

Tempered glass Thickness:2-19mm Size:55*55(min), 3000*6400(max) Wood crate and carton

Tempered glass 1)Thickness: 3-19mm 2)Color:clear or color 3)Size: as your request 4)edgework: rough grinding,accurate grinding,flat and arris,pencil and C,etc 5)Package: seaworthy strong crates,with paper or powder as interlayer between each two peices of glass. 6)Application:widely applied in window and door, facades and curtain walls, automobile , train, vessel, furniture and decoration. 1.Security. Tempered glass is safety glass, for it will split into obtuse fragments, which has no threaten to humans 2.High intensity. The intensity of tempered glass is 4 times than normal glass 3.Thermal stability. The temperature range our glass can bear reaches 200 degree celsius 4.Good flatness. Our company brings in worldwide top two sections of glass tempering furnace, keeping the appearance of glass curtain wall smoother 5.Holes availlable at customers option. Package: seaworthy strong crates,with paper or powder as interlayer between each two peices of glass.

Products specification of tempered glass: The thickness: 3mm-22 mm Size: any size(or as your request) Tempered glass: With good inflexible and heat resistant, it is up 3-6 times than a standard glass, and the press is more than 95 MPA; With good heat reliability, it can endure the temperature from 200-30000C, and for the standard one, it only can be 70-10000C. Safety, When broken, it only can be as small granules and will reduce the damage to personal and property to lowest. Goods are packed in standard export wooden box.

Tempered glass is made by heating flat glass to approach its softening temperature and suddenly chilling it with jets of cold air, which produces highly desirable conditions of induced which result in additional strength,resitance to thermal stress and impact resistance. Feature: 1. High intensity .tempered glass is 3-5 times stronger than ordinary annealed glass 2.Good safety function .In the event of breakage, tempered glass breaks into blunt particles causing practically no injury to the person 3. Withstand rapid temperature change .tempered glass can withstand a very wide range of rapid temperature change. Thickness:2-12mm Specification: Min:200x200mm Max:2440x3660mm Application: Construction, automobile, train, ship, furniture, automatic door escalator, microwave oven, refrigerator, shower etc. Standard wooden crates.

What is tempered glass? Tempered glass is float glass that has been heated and then cooled rapidly to increase its force or pressure on its surface, its physically strength is times of normal float glass. What is heat strengthened glass? Heat strengthened glass is a kind of glass between float glass and tempered glass, it has part advantages of tempered glass, such as high strength, meanwhile it avoids the weakness of tempered glass, such as flatness problem, spontaneous breakage and completely damage when broken. Why heat soak test is needed for tempered glass? Temperd glass is used in building industry as safety glass, but the weakness of spontaneous breakage affects its use. Heat soak test is a treantment to nickel-sulphide inclusions, which is the main cause of spontaneous breakage. Wooden crate Thickness: 5mm-25mm Min size: 300*300mm Max size: 3300*9500mm/2440*12000mm.

1,Thickness:3-19mm 2,Max:5000X3300mm Min:600*900mm 3,SGCC,CE,ISO 4,Edge:Flat,grind,polished 5,Holes available. Specification a)Max size:5000X3300mm b)Thickness from 3mm-19mm c)Color:clear,low-iron,F green,ocean blue,Fort blue,and other tinted glass. d)Edge:Flat edge,grind edge,fine polished edge,bevelled edge and others. e)Corner:natural corner,grind corner,round corner with fine polished. f)Holes:Drill work available at customer's option. Quality Standard toughened glass with SGCC,CE certificate,AS/NZS certificate,3C certificate and Fire-proof certificate. Applications Building glass,Curtain wall, Air conditioned Buildings,Hotel,Furniture, Showcase,Sightseeing elevator,Bus station,Subway station, bank, airport,etc. Crate with paper and powder interlayer