Description The chemical, electrical and thermal performance of ptfe is second to none among any other available plastics. So it is known as ¡¡ãthe king of plastic¡¡à. It is among the most widely used of all the fluoropolymers. Characteristics -non-stuck Applications Bearings Gaskets Sealing rings Wear rings Friction pads Insulators Chemical resistance linings Medical apparatus such as hoppers, beakers By plastic pallet or wooden pallet
Ptfe extruded rod: Description: 1.Ptfe rod could work in temperature of -180~260 2. Good dielectric in mediums. 3. It has not-sticky property. 4. Nice insulation property 2. Self-lubrication Specification of ptfe rod: (oem is available) Diameter(mm)Length(mm)Tolerance 51000-3000mm Properties: ItemData Apparent density2.10-2.30 g/ cm3 Tensile strengthy14 mpa Elongation at breaky140% Working temp-180~260 Melting point330 Produce max.Temp390 Compressive strength 1% deformation400-500% Hardness50-60 shored Water absorption0.01% Application: 1 chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc. 2. Machine: used in piston ring, guide ring, machine tool guideways etc. 3. Electrical and electronic engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc. 4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper. 5. Light textile and other industry: ptfe product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc. Wooden case
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180 C ~+260 C and is the best electrical insulator of all known plastics. Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on. Remarks: We can also produce PTFE(Teflon) sheet in other sizes and thickness according to customers' specific requirements.
Ptfe teflon rods Ptfe teflon rods are available from 6mm dia to 500mm dia in pure teflon and various filled grades
Ptfe rod extruder dia 80mm-150mm 1.Horizontal ram extruder for ptfe rod 2.Ram extruding machine for ptfe rod 3.Using for pre-sintering ptfe material. 4.Suit for new ptfe material or recycle ptfe material. Teflon extruding machine for ptfe rod(80-150mm) This ptfe extruder is able to extrude rod which dia from 80mm to 150mm. The automatic Production line is controlled by computer, which is really easy to operate. Meanwhile, the Plastic extrusion machine is advance designed, high output, low energy consumption, Long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Technical data Description model no. Machine model pfb-150 Plastic extruderptfe rod Power33 kw Min - max dia80-150 mm Tolerance1-2mm Lengthunlimited Production per hour8-16 kg Electricity consumption per hour2.5 kw Weight of the machine1220 kg High of the machine1680mm Floor area of the machine1.6 m2 Warrenty for parts1 year Machine gurantee period1 year Free spares1 set
Specifications of single screw plastic ptfe teflon extruded rod 1. Use virgin ptfe resin to make 2. The size is: A)od: 3mm~25mm, max length 4200mm. B)od: 25mm~150mm, max length 4200. C)od 150~500mm, 1000mm. 3. Tolerance: -0.1~+0.1mm 4. Color: natural white, red, yellow, black. 5. Surfact: smooth, no impurities, no black spot. 6. Perfect package: inside is plastic paper, outside is fumigation wooden box. 7. Delivery time is usually 10days, as can according to the fact quantity to deliver. Characteristics of single screw plastic ptfe teflon extruded rod One key important advantage of ptfe rod is its operating temperature range, it can Easily out perform other engineering plastics by being able to perform continuously At -250°c, right up to an amazing 250°c. Another important advantage of ptfe rod Is its outstanding co-efficient of friction, ptfe is in the record books as having one of The lowest friction values known to man. Ptfe also has excellent acid and chemical Resistance. Another feature of ptfe is its ability to set by or due to compression. Ptfe has excellent electrical resistance. Ptfe is also water repellent and is often used In the manufacture of modern high performing, water repellent and breathable clothing.
Specifications PTFE Rod Ram Extruder PTFE Tube Ram Extruder PTFE Mould Press Machine PTFE Flim Skiving Machine PTFE Paste Extruder For Hoses wooden box
Product:Rods Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.2, based on 42 reviews price:Start from 20 USD SS Rods, ASTM B221, UNS N06600, UNS N02200, UNS N06601, UNS N08800 High Nickel Alloy Rods, supplier. RFP India is India's well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.
We at BDMG, provide PTFE Teflon Tapes for electric insulation purpose or for release film. PTFE Tapes are available in any required width 6 mm to 150 mm and in any required thickness 0.003 to 0.025 inch as per the customer needs.
We deals in the following products of India, China, Taiwan and Korea Origin:- Steel Tie Rod
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Wire Rod Aluminium Billets
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Diameter 5.5MM-50.0MM Coil Weight - 2 tons around SPEC - SC/SCR/SCM/HIGH CARBON
Can supply: PE Fish Net (mix Color) Bales Scrap/waste. Materials are POST INDUSTRIAL. Can load in 1x40HC container approx. 26 MT (+ 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Size : 5,5 mm-25 mm production range Weight min. 2050 max 2400 kg Outside diameter 1250 mm Internal diameter 850 mm Height 1700-2200 mm
Hindalco's copper division, Birla Copper, operates one of the largest single-location custom copper smelters in the world. The custom copper smelter at Dahej in the state of Gujarat (west coast of India) houses three copper smelters, three refineries, two rod plants, a captive power plant, a captive oxygen plant, phosphoric acid plant, di-ammonium phosphate plant, precious metal recovery plant, captive jetty and other utilities. Hindalco produces LME grade copper cathodes, continuous cast copper rods in various sizes, and precious metals like gold and silver. Hindalco is one of the major manufacturers of 19.6mm diameter copper rods, which is used for railway electrification. The co-product, sulphuric acid, is partly utilised to produce phosphoric acid and fertilisers like di-ammonium phosphate (DAP). Birla Copper's brands, Birla Copper and Birla Copper II, are recognized for their high purity and consistent quality in the domestic as well as global markets. Birla Copper is an ISO 9001, 14001, 27001, 50001 and OHSAS 18001 certified company, registered on the London Metal Exchange as Grade-A copper brand, and certified as a Star Trading House having labs for chemical, mechanical and electrical testing accredited by the National Accreditation Board for Laboratories (NABL).
Copper Rod: Grade: 99.99 Capacity: 500 Tones Price: LME + 600$ negotiable Incoterms: CIF Orygin: Zambia Inspection: SGS or a similar inspection agency will conduct inspections at the loading port. Buyer's Rights: The buyer has the right to appoint an independent surveyor acceptable to the seller to be present during the weighing, sampling, and analysis procedures for the cargo. This arrangement is valid for both parties.
300mm long rods as per standards.
Teflon rods.
steel threaded rods are used in a variety of applications, for plumbing industry, for fire fighting, for hvac., for home building.
