Sz Series Horizontal Conical Twin Screw Suppliers and Manufacturers

JIANGYIN DELING GEARBOX CO.,LTD, a professional designer and producer of hard tooth surface gearboxes, from its very first day of operation to now, it has been concentrating in developing and manufacturing the gearboxes especially for rubber and plastic machinery for over 20 years in China. If you are interesting in our products, please contact me email Shirley@dlclx.cn, whatsapp: +8613706160536. SZ horizontal conical twin screw gearbox is a special mechanical drive device designed to match with conical twin-screw extruder. The device decelerates the speed and increases the torque of the power from master motor through gearbox before exporting it to the long shaft of distribution box that drives short shaft through a pair of slender cone screw gear with drive ratio of 1:1. Long shaft and short shaft drive short screw at the same angel as screw to extrude high-quality products in the way of different direction and outward turning. url:http://www.delinggearbox.com

Specifications: 45/90, 45/100,50/105, 51/105, 55/110, 58/124, 60/125, 65/120, 65/132, 68/143, 70/140, 75/150, 80/143, 92/188 The compression ratio of the screw can be designed according to different products and mixtures. Nitrided Hardness: HV 900-1000 Nitrided Case Depth: 0.45mm-0.7mm Alloy hardness: HRC50-65 Alloy depth: 0.8mm-2.0mm Materials: Quality 38CrMoAlA Advanced nitriding process Corrosion&Abrasion resistance bimetal spraying process

This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.

Screw diameter: 35mm-200mm Length: less than 10000mm Barrel diameter: 35mm-200mm Material: 38crmoala; skd61; skd11; 40cr; 42crmo; high quality alloy steel Technology for tin coated screw barrel/: nitriding treatment, alloy coating spraying, heat-treatment, quenching Appliance for tin coated screw barrel/: pa, evoh, eaa, pc etc

Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize according to customers' requirements. The compression ratio of screws can be designed according to different products and ingredients. Base materials: 1)38crmoala(jis sacm645) 2)42crmo(aisi 4140) 3)4cr5mosi v1 (jis skd-61) 4)9cr18mov 5)hpt Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ¡ý 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case

1.65/132 conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale Dimension:15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203

1.Cincinnati conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale 15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203

1.80/156 conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale 15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203

SZ series gearbox for conical twin-screw extruder is a special driving unit matched with conical twin-screw rod extruder. It consists of two parts, namely, the reduction box and the distribution box. After reducing speed and increasing torque of the motor, it outputs the motive power to the distribution box, then drives the double output shafts (the included angle is the same with that of twin-screw rods) via a pair of small conical spiral gears with driving ration of 1:1,thus to drive screw rods to rotate outward with different direction. Product Feature 1.There are involute cylindrical gearbox, which data and structure are optimally designed by the computer. 2.The gears are made of top-quality high strength low carbon alloy steel after carbon penetrating, quench and teeth grinding. It has high hardness on teeth surface, large bearing ability, small noise, smooth operation and high driving efficiency. 3.The material of the distribution box is nodular graphite casting iron and the gears have high-strength ground teeth, in which snake-shaped cooling water pipes are distributed. 4.The maximum input speed of the gearbox is normally not larger than 1500 rpm. 5.The temperature in work environment is -10-45.When temperature is lower than 0,the lubricant oil should be preheated to + 10 before starting.

Parallel twin-screw and barrel used in extruder Specifications PX-45/2~150/2 Lenght/Diameter Ratio:L/D=18~25 The compression ratio of the screw can be designed according to different raw materials and products. Hardness hardness:HV800-1000 Nitrided Case Depth:0.45mm~0.7mm Alloy Hardness:HRC 50-65 Alloy Depth:0.8mm~2.0mm

Product Description SZL series gearbox for conical twin-screw extruder is a special driving unit matched with conical twin-screw rod extruder. It consists of two parts, namely, the reduction box and the distribution box. After reducing speed and increasing torque of the motor, it outputs the motive power to the distribution box, then drives the double output shafts (the included angle is the same with that of twin-screw rods) via a pair of small conical spiral gears with driving ration of 1:1,thus to drive screw rods to rotate outward with different direction. Product Feature 1.There are involute cylindrical gearbox, which data and structure are optimally designed by the computer. 2.The gears are made of top-quality high strength low carbon alloy steel after carbon penetrating, quench and teeth grinding. It has high hardness on teeth surface, large bearing ability, small noise, smooth operation and high driving efficiency. 3.The material of the distribution box is nodular graphite casting iron and the gears have high-strength ground teeth, in which snake-shaped cooling water pipes are distributed. 4.The maximum input speed of the gearbox is normally not larger than 1500 rpm. 5.The temperature in work environment is -10-45.When temperature is lower than 0 the lubricant oil should be preheated to + 10 before starting.

custom difference size of parallel twin screws and barrel

For shaped profiles, door and window profiles and decorative sheets from PVC

1.Conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale Conical twin screw barrel for plastic processing machinery Materials38crmoala 42crmo(jis scm440) 9cr18mov Skd61 etc Port departure Ningbo port Shanghai port Technical ParameterDiamete45/2- 150/2 Technical ParameterRoughnessRa 0.4um Hardness of nitrideHv850-1000Hardness of Quenching temperingHb280-320 Alloy depth0.8-2.0mmDepth of nitride layer0.5-0.8mm Alloy hardnessHrc50-65 Min 1 set Dimension:45/90 50/105 55/110 65/132 80/156 92/188

Twin Conical Screws and Barrels Types of double screws gradual,levity,commingle,taper,supper,taper,granulating etc. Used for producing pipes,profiles and sheets of ordinary plasticíóPP,PE,ABSíóASíóPS etc

Sjsz conical twin-screw extruder Screw barrel:38crrm nitriding Hard tooth surface gear wheel box Vacuum venting device Forecd feeding system Electric macine; simenz Temperature controller: omron Frequency adjustment: helipu Power: 37kw Heater: cast aluminum stainless steel Size:4235*1520*2450 weight:4000kg

1.We are a professional company specialized in manufacturing many types of screw, the barrel can be applied on all types of injection moulding machine,rubber hot-feeding extruder, rubber cold-feeding extruder, pin barrel cold feed extruder, plastic extruder with different specifications. 2.The models of screw include: Variable pitch and variable depth, variable pitch and equal depth, variable depth and equal pitch, and equal depth and pitch. Groove multi-die type, composite type, mixing type and separating type. 3. The material of screw: manufactured with high-quality nitro alloy steel, applying the method of hardening and tempering and nitriding, thus it enjoys the characteristics of long working life, wear resistance, and anti corrosion. Besides, the technique of hard alloy spraying or chrome plating can be used on the working surface of screw, which will make it have better using effectiveness.

Rotos horizontal internal bearing Twin Screw pumps are available in standard foot mounted configuration with sump heating arrangement as an option. These pumps are selected where the fluids are clean and have lubricating properties. Mechanical seals are standard. Option for gland packing is also available. Pumps are fitted with relief valves suitable for 100% bypass. The suction and discharge ports are in-line. Internal Bearing RI series Capacities upto 500 m3/hr Pressures upto 40 bar These pumps are designed for clean and lubricating media. The pumps are fitted with the bearings inside and the bearings are lubricated with the pumping media itself. Available in standard foot mounted configuration with sump heating arrangement as an option. Built in safety relief valve designed for 100% bypass. Material Options CASING: Cast Iron, Cast Steel, Fabricated Steel Fabricated Stainless Steel. LINER: Case Steel, Stainless Steel. SCREWS: Alloy Steel Stainless Steel, Hardened Steel. TIMING GEARS: Hardened Steel. OTHER EXOTIC MATERIALS: Duplex Super Duplex . SCREW SURFACE COATING: Hard Chrome Plating. Price Range: Rs. 1.25 Lacs to Rs. 1.50 lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.

Parallel twin screw In wooden case