Submersible water pump for evaporative air cooler Good quality long life According to your requirements
Submersible water pump Submersible water pump As a professional manufacturer from china since 1997, we have export our products to more than sixty countries and averagely deliver to more than thirty 20'gp containers per month. And with Good quality Excellent after-sales services Favorable price Powerful r&d ability, we believe we would achieve more. Characteristics: Suitable for lifting clean water not containing substances Easy use; Extremely reliable even when subjected to continuous use, since the motor is fully cooled.; Particularly suited for domestic use, to drain dirty water in all cases where suspended solids up to 20mm have to be dealt with; Applications situations: emptying of pools and tanks, disposal of domestic sewage, emptying of sump pits.
Submersible water pumps for mining, deep well pump, centrifugal pump, stainless steel pump Model: 200QJ20-30/2 Flow: 20m3/h Head: 30m Power: 3kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump Model: 200QJ63-28/2 Flow: 63m3/h Head: 28m Power: 7.5kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Flow: 10m3/h Head: 95m Power: 5.5kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380v Phase: 3 phase/50hz Color: blue Qj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Products overview: Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: Qj submersible pumps use conditions 1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water ph 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / l. Application : Deep well water Farm irrigation Sprinkling irrigation Urban and rural industry Mine supply and drainage.
We are a castings manufacture with the certificate of ISO 9001 and BV . The products such as the pump casing , impeller , shaft , cover ,pump bowl ,crusher parts, gear ,plate and other wear parts .And we can also supply the Goulds 3196 and Durco parts . We can supply the pump bowl in different size based on customer's drawings .
Solar Power Submersible Water Pumps for Agriculture. Submersible Solar Pumps use solar energy to pump and transport water. It is a pump that is immersed in water. It is the most attractive water supply method in the sun-rich regions of the world today, especially in remote areas that lack electricity. It is mainly used for domestic water supply, agricultural irrigation, garden watering and so on. Categories: DC SOLAR SUBMERSIBLE PUMP Brand Name: Xingtong Technology Model: 3DPC Type: 3 inch solar pump with plastic impeller Pump Body Material: Stainless steel Outlet Material: Brass Impeller Material: Plastic Application: Household water supply,small area irrigation Package type: Wooden case Warranty: 2 years Pump power: 750W Pump voltage: DC 80-420V Outlet: 1.25'' to 1.5'' Cable: 2m Solar Panel: Poly 990W
Flow: 35m3/h Head: 5m Power: 0.75kw Material: cast iron Outlet dia: 80mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Flow: 10m3/h Head: 195m Power: 13kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Model: 3fls1.8/100-d24/270 Max flow: 1.8m3/h Max head: 100m Voltage: dc 24v Power: 270w Outlet dia/pump dia: 0.75inch/3inch Packing: packed by carton box -
Power: 48v 600w, 1hp, 2hp, 3hp
Flow: 10m3/h Head: 21m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Submersible Adjustable Water Pump Aquarium Hydroponic Fountain Model no.: MY-016 to 6800 Voltage range : 110/220/240 Max load current : 4.0 a Max static lift : 5.5m Max flow : 6500 l/h Rate power consumption : 2-138W
Model no.: win-151208 Voltage range : 6-14 v Rated voltage: 12 v Max load current : 4.0 a Max static lift : 8m Max flow : 1200 l/h Rate power consumption : 45.6 w
ADVANTAGE OF DC SOLAR PUMP 1 Permanent magnet DC brushless synchronous motor:The efficiency is improved by 15%-20%; Save energy;Reduce the consumption of solar panels. 2 Brass or stainless steel outlet/connector/oil cylinder. 3 Japanese NSK bearing:prolong the working life. 4 Alloy mechanical seal:Longer working life and high reliability. 5 Motor coil is made by automatic winding machine with centralized winding technology, motor efficiency is much improved. 6 The pump parts are processed by high-precision and fully automatic machines,strictly controlling the dimension precision and smoothness. 7 Intelligent water shortage and full water protection. 8 DC Controller: (1)Waterproof grade:IP65 (2)Ambient temperature:-15~60 (3)MPPT function,the solar power utilization rate is higher. (4)Automatic charging function:Guarantee the pump normally working, meanwhile charge the battery;And when there is no sunshine,the battery can make the pump continuously work (5)LED displays the power,voltage,current,speed etc working condition and error code. (6)Frequency conversion function:It can automatically run with frequency conversion according to the solar power,and user also can change the speed of pump manually. (7)Automatically start and stop working. (8)Water proof and leak-proof:Double seal effect. (9)Soft start:No impulse current,protect the pump motor. (10)High voltage/Low voltage/Over-current/High temperature protection
Model: 3fls1.8/100-d24/270 Max flow: 1.8m3/h Max head: 100m Voltage: dc 24v Power: 270w Outlet dia/pump dia: 0.75inch/3inch Packing: packed by carton box -
Mini-dc5l120y007s Specifications Note: a small sluice gate on the side 2 kind of output water pipes 3pieces of holding suckers Input voltage: 5v dc Power: 1w H.Max.: 0.7m Q.Max.: 120l/h Size: 43*38*30mm Wire length: 100cm Output water pipes dimension: 1.Outside diameter: 8.5mm 2.N.W.: 0.11kg
1. Large flow capacity achieved with almost no vibration or noise by use of axial and mix flow design. 2. Robust construction and compact design with a dry motor, double mechanical seals and impeller flow guide vane for high efficiency. 3. Easy handling, energy saving and low maintenance. 4. High efficiency motor directly connects to impeller to achieve best energy savings. 5. Pump manufactured with heavy duty housing, cable leads are isolated by hardened epoxy for water proofing, double mechanical seals. 6. Shaft and impeller are precisely balanced for quiet and long life performance. 7. Casted albc3 meterial ( aluminum bronze ) impeller, it has a great abrasion and corrosion resistance.
Plastic garden submersible pump Operating Condition: Fluid temperature up to 35 Centigrade Maximum ambient temperature 40 Centigrade. Maximun particale: 30mm for dirty water type Maximun particale: 5mm for clean water type Structural Charactristics: * External float switch for automatic pump operation. * Pump body made from fiber glass reinforced technopolymer, particularly to mechanical stress, knocks and corrosion, or stainless steel pump body. * Technopolymer open impeller. * Suction strainer made from fiber glass reinforced technopolymer, providing the support base for the pump. * Technopolymer hose joint with screw fitting. * C45 steel motor shaft. * Double seal carbon/aluminum on the pump side and sealing ring on the motor side. * Sealed induction motor, suitable for continuous duty with built-in thermal cutout relay (motor protector). * Insulation Class B (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself) * Protection rating IP 68 * "H05/07 RN-F" Neoprene submersible supply cable. * Supplied standard with 10 meters of cable and plug. * Voltage and frequency available on request. * 220V/50Hz, 220V/60Hz, single phase * copper wire stator with thermal protector Insulation class B, Protection IP44, Continuous duty . Certification: 1. CCC Safety certificate 2. CE certificate 3. GS certificate. HS Code: 841381 Trademark: Haitaipump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.
Model Power (w) Voltage (V/Hz) Max Head (M) Max Flow (M3/h) Speed (r/min) Piping (MM) Q(D)X 1.5-17-0.37 0.37 220V/380 17 1.5 3000 25 Q(D)X3-20-0.55 0.55 220V/380 20 3 3000 25 Q(D)X10-12-0.55 0.55 220V/380 12 10 3000 38 Q(D)X 15-7-0.55 0.55 220V/380 7 15 3000 50 Q[D)X 1.5-32-0.75 0.75 220V/380 32 1.5 3000 25 Q(D)X7-18-0.75 0.75 220V/380 18 7 3000 38 Q(D)X10-16-0.75 0.75 220V/380 16 10 3000 50 Q(D)X15-10-0.75 0.75 220V/380 10 15 3000 64 Q(D)X15-15-1.1 1.1 220V/380 15 15 3000 50 Q(D)X6-26/2-1.1 1.1 220V/380 26 6 3000 38 Q(D)X25-10-1.1 1.1 220V/380 10 25 3000 64 Q(D)X40-7-1.1 1.1 220V/380 7 40 3000 76 Q(D)X 15-18-1.5 1.5 220V/380 18 15 3000 50 Q(D)X6-33-1.5 1.5 220V/380 33 6 3000 64 Q(D)X25-13-1.5 1.5 220V/380 13 25 3000 64 Q(D)X40-9-1.5 1.5 220V/380 9 40 3000 76 Q(D)X65-7-2.2 2.2 220V/380 7 65 3000 100
