Stone Crusher Impact Stone Crusher Price Suppliers and Manufacturers

Model Specification(mm) Feed opening(mm) Max feeding size(mm) Capacity(t/h) Model of motor Power(kw) Weight(t) Overall dimension(mm) Pf-1007 F1000*700 400*730 250 15-60 Y250m-6 37 9.5 1800*1600*1800 Pf-1010 F1000*1050 400*1080 300 50-90 Y315s-6 75 14 2340*2007*2500 Pf-1210 F1250*1050 400*1080 300 70-130 Y315l1-6 110 17 2582*2053*2809 Pf-1214 F1250*1400 400*1430 300 90-180 Y315l2-6 132 22 2582*2403*2809 Pf-1315 F1320*1500 860*1520 350 120-250 Y2-355m2-6 200 26 2930*2761*3053 When stone entering the stone impact crusher, materials are continuously thrown to the impact device above the rotor by the high-speed rotating blow bar. Then they are rebounded from the impact plate to the working area of the blow bar, and are impacted again. The materials from large to small are to be crushed by the first and second impact rack repeatedly. The process won’t stop until the materials are crushed to the required size and then discharged from the outlet. Adjusting the distance between the impact rack and the rotor frame can change the shape and size of the final product.

PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material. Application: Metallurgy, construction material, mine, beneficiation and large block material crushing. Our advantages: 1. Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder. 2. The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well. 3. The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection. 4. Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing. 5. The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically. The PF series impact crusher is mainly compose of the rack, driving system, rotor, hammer and impact plate etc. The main feature including: 1.Rack: It composed by two parts of upper and lower with connection by bolt. All the parts contact the crushed material in the rack have set replaceable lining plate. 2. Driving System: The main shaft and rotor are driving by motor through belt then doing the high speed rotary motion. 3. Rotor: It adopts entire cast steel structure with high mass force, solid and durable, convenient to install the hammer. 4. Impact Plate: It is made from new type abrasion material and hanging freely inside the equipment. One end connect with the two sides of the rack through hanging shaft hinge, another end is bearing in the upper rack cone gasket through stay bolt which is adopt a sphere gasket, it can prevent the equipment damage by non-crushing material when crushing material. 5. Hammer: It is made from new type abrasion material and fixed on the rotor through wedge block

Used for crushing of stone, iron ore, coal etc.

Stone crusher.

Stone crusher is widely used in mining, metallurgical, construction, chemistry, petrochemicals, transportation, energy, building materials industry, suitable for crushing high hard, mid hard and soft rocks and ores such as iron ore, limestone, slag, marble, quartz, granite, cement, clinker and so on. Stone crusher features large crushing rate, high yield, equal product size, simple structure, reliable operation and easy maintenance, economic operating costs etc. Our stone crusher contains PE jaw stone crusher, JCE jaw stone crusher, PF stone crusher, HPC cone stone crusher, VSI stone crusher, mobile stone crusher, PC stone crusher, etc.

Crushing various of midhard and above midhard ores and rocks, and making stone powder and engin oil separated Weight(t):11.3 overall dimension l*w*h(mm):2695*1640*2350.

We Are Leading Manufacturer Of All Types Of M-sand Unit, Vertical Shaft Impactor (vsi), Sand Washing Classifier, Vibrator Screen, Conveyor, Etc., We Are Also Concentrated In Manufacturing Of Conveyor, Rollers, Roller Stand, Head & Tail Drums, All Size And Range Of Vibrating Screen Wire Mesh With Good Quality

Low Consumption Mining Crusher Machine , Rock Jaw Crusher is crushing equipment which mainly be applied in metallurgy, mine, chemical industrial, cement, building, fireproofing materials and ceramics and other industries to process middle hardness mineral. It is mainly used in various soft and hard mineral whose compression strength is no more than 300MPa, and the size of the biggest lumpiness should not be bigger than that of technical specifications.

Capacity: 3-500 m/ h. Input Size: 120-1020mm. Output Size: 10-300mm. 1. Introduction The Jaw Crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa. 2. Processed Materials Iron ore, copper ore, gold ore, manganese ore, river stone, gravel, granite, basalt, minerals, quartz, diabase, etc. Applications Mining, metallurgy, construction, highway, railroad, and water conservancy 3. Working principle The motor transmits through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when mobile jaw moving. So the mobile jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet. 4. Advantages (1). Simple structure, easy maintenance; (2). High crushing ratio, even output granularity; (3). High reliability, low investment; (4). Low noise, less dust. All equipments are produced by the professional technicians of our own factory, with best price and high quality. We look forward to cooperating with you.

The jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with comprehensive strength less than 320 MPa.

For the construction industry, this is really a "difficult" year, limiting the sand and gravel mining because of strict environmental supervision, and the price of sand and gravel has risen nationwide. Even in the off-season, it is still difficult to buy best-quality sand. For the sand and gravel plant, the sand factory that does not meet the standard has lost a lot. For the problem of environmentally strict, HXJQ Machinery has developed and produced several types of environmentally friendly building stone crusher, such as hydraulic cone crusher, fixed jaw crusher, portable rock crusher, tracked crusher, etc. Green sandstone factory has opened the new "stone" generation of the environmental stone factory! From a macro perspective, Hongxing Machinery building stone crusher is mainly divided into fixed and mobile types, and the two types have different working states, different cost inputs, and different advantages, but they both have environmental protection and stable operation. https://www.hxzgcrusher.com/

Jaw crusher application: Jaw crusher is widely used in mining , smelling, building material, highway, railway, water conservancy , chemical industry and many other departments, for this machine, the suitable crushed material are pyrite, limestone, basalt, phosphate, heavy crystal stone, calcium carbide, coke, etc. Jaw crusher features: This jaw crusher is composed of machine frame, eccentric shaft, large belt pulley, flywheel, movable jaw , side guard, toggle plate goggle plate backseat, adjust gap screw, return spring, fixed jaw plate and movable plate, among them, the toggle plate still play a role as insurance. This series have: high crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, low operating cost. 1.Crushing chamber is deep and no dead zone, improving feeding ability and capacity 2.Crushing ratio is high, finished product is regular 3.Pack discharge mouth adjustment device is reliable and convenient, and its adjustment range is large , increasing the equipment flexibility. 4.Lubrication system is safe and reliable, easy to replace the spare parts, simple maintenance 5.Simple structure, reliable operation, low operating cost. 6.The equipment is saving energy: single machine can save energy by 15-30%, and the system can save above one time. 7.The discharge mouth adjustment range is large, which can meet different customers need. 8.Low noise, small dust. Jaw crusher operating principle: The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity. Standard exporting container.

Stone crusher hammer

Description Construction Portable Mobile PE Crushing Machine Gold Mining Rock And Stone Jaw Crusher Jaw crusher applies to the various minerals or rocks with strongest anti-crush pressure less than 250 Mpa. Jaw stone crusher is widely used in mining industry, cement industry and concrete industry. Crusher mainly used for first step crushing or the Middle Intermediate crusher. Principle The working parts of jaw crusher are two jaw plate, one is static (fixed jaw), it is vertically (or slightly lean outside) fixed on the front wall of the body, the other is the dynamic (moving jaw), it is in a tilt position and forms a small crushing chamber (working chamber) with the fixed jaw plate. The movable jaw plates are periodically reciprocated against the fixed jaws, sometimes separated and sometimes close. When it is separated, the material enters the crushing chamber and then the product is discharged from the lower part. When it is near, the material between the two jaws is crushed by crushing, bending and splitting. Advantage 1) Stone Jaw crusher using world-class manufacturing process, moving jaw assembly using high-quality cast steel components, heavy eccentric shaft with forging processing. 2) Jaw crushing machine using the finite element analysis technique, the integral cast steel housing ensures complete cooperation with the frame, greatly enhancing the radial strength of the bearing, so that the device has a higher strength. 3) Jaw Crusher cavity with symmetrical "V"-shaped structure and discharger with wedge adjustment device make the adjustment simpler, safer and quicker. 4) Larger and more durable eccentric shaft bearings and toothed panels make the equipment carrying capacity stronger. So its yield is higher, working life is longer.

PE, PEX series jaw crusher is a large kind of complex tilting crushing equipment, and it is mainly used for crushing medium hard ore and rock whose compression strength is no more than 250MPa, and with the quality of large crushing ratio, high yield, uniform particle size, reliable, easy to maintain and low operating cost, it is widely used in mining, metallurgy, construction, roads, railways, water conservancy, chemical industry and etc. PE series is used for coarse crushing different kinds of ores and rocks, and PEX series is used for intermediate and fine crushing. Application: Be applied in large block of material crushing in mining industry, metallurgical industry, construction industry, highway, railway, water, and chemical industry. Feature and Advantages: 1.Jaw plates is made of high strength steel, one time shape casting, and with characteristics of wear resistant, compression resistance, and long life; 2. High productivity, large crushing ratio, uniform product size, low power consumption 3. Gasketed discharging adjusting device, reliable and convenient, large adjustment range, equipment flexibility is increased. 4. Simple structure, reliable operation and low operating costs, safe lubrication system, and easy parts replacing. PE, PEX series jaw crusher is mainly consist of frame, eccentric shaft, pulley, side guard plate, bracket, discharging gate adjusting device, fixed jaw plate, movable jaw plate, safety device and etc. And its main structural features are as following: 1Frame It mainly is consist of side panels, front box assembly, rear box, and etc; 2Eccentric Shaft Rotating Part It mainly is consist of movable jaw, eccentric shaft, bearings, bearing pedestal, belt pulleys and etc., and it is the major part for dynamic transmission; 3Crushing Cavity Working Part It mainly is consist of fixed jaw plate, movable jaw plate, side liners, guard board and etc., and it is the working parts for breaking materials; 4Safety Device It is consist of bracket, bracket base, spring, spring rod and etc., and it is the parts that play a security role during crusher works in an abnormal condition. 5Discharging Gate Adjusting Device It is mainly consist of adjusting fixed ramp, adjusting sliding ramp, top wire bolt, slide locking lever, and etc., it is used to adjust the size of the discharging gate and to control the discharging particle size.

Introduction: Cone crusher is suitable for crushing all kinds of ores and rocks above medium hardness. It has the features of reliable structure, high productivity, easy adjustment and economical operation etc. It is widely used in metallurgy, architecture, rock making, chemistry and silicate industry for crushing various mid-hard and hard ores and rocks. The spring system acts as an overload protection system that allows iron to pass through the crushing chamber without damaging the crusher. It uses consistent grease or water for sealing, which separates crushed particles and lubricating oil, and ensures reliable work. The types of crushing chamber depend upon the usage of the final products. The standard type is applied to medium crushing; the medium type is fit for medium and fine crushing and the short head type is fit for fine crushing. Main Features:We supply a wide range of Cone Crushers, for various secondary and tertiary crushing applications, therefore to insure the best and most feasible Cone Crusher type, fit for different plant configurations, designed for the most efficient and economical production and rock down sizing application. Our Cone Crushers are supplied in four general categories, designed for various types of secondary or tertiary applications, both for closed circuit and open circuit configuration: 1.Coarse type application. 2. Fine or medium type crushing. 3. Short head design.4. Super short head for fine crushing application. 5. Continuous Lubrication: This type of crushers are supplied with high capacity external mounted lubrication unit, composed of oil-tank, oil filtering system, high oil temperature shut-down, low oil flow shut-downs and oil flow gauge, which is designed to supply continuous and stable oil, by forced lubrication to the Cone Crusher, for smooth rotation and operation.  Cone Crushers are configured with many safety features. The lubricating unit is interlocked with the main motor, in order to provide additional safety, which includes oil filtration and automatic shut-down in the event of high oil temperature, as well as low oil flow. Crushers are configured with Spring-Loaded release system, which allows any inscrutable material to pass through the crusher, without causing damage to the crusher. The locking system (manual or hydraulic), will easily secure the crushing clearance. All models are configured with proven spring-type mechanism, in order to recover Tramp-Iron and provide protection to the unit. Applications :Cone crusher is a kind of crushing machine commonly used in mining, metallurgical industry, construction, road construction and chemical industry. Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.

Stone hammer crusher application: this series of stone hammer is applicable crushing of brittle minerals, such as coal, salt, plaster, alum, brick, tile and limestone with compression strength no more than 100mpa and humidity no more than 15%. Pc hammer crusher introduction:this series of machine broke materials through the high-speed rotating hammer body and collision the material surface, it has a simple structure, large crushing ratio, high production efficiency and other characteristics, it can be used for dry and wet two forms crushing, it applies to mining, cement, coal, metallurgy, building materials, roads, fire and other departments chronology medium hardness and brittle materials. The device can change material particle size and adjust gap of article grate in accordance with user requirements, so it can meet different users Structural characteristics: stone hammer crusher has compact frame, reasonable layout, easy installation, good maintainability, simple operation. Particularly, it excellently adapts the layout of cement production process, save the space of process layout. With special structural characteristics, that is having big materials ratio etc. Stone hammer crusher is divided into ordinary hammer crusher and ring hammer crusher respectively. Ring hammer crusher generally used in coal, coke and other industries. Ordinary hammer general english prefix is expressed by pc, used pch english prefix that usually is ring hammer crusher.

Max feed size(mm):1200 Discharge opening(mm):220-350 Capacity(thp):450-1000 Shaft speed(r/min):180 Motor power(kw):355. Standard container, spare parts will be packed in wooden cases or as required.