Steam coal GAR 4200 Kcal/kg (ARB), rejection below 4000 Kcal/kg (ARB). NCV 3800 Kcal/kg (ARB), rejection below 3600 Kcal/kg (ARB) 1. Total Moisture (ARB): 35% 2. Inherent Moisture (ADB): 14% Approx 3. Ash (ARB): 3.5%, rejection above 5% 4. Volatile Matter (ADB): 41% Approx 5. Fixed Carbon (ADB): by difference 6. Sulfur (ARB): 0.2%, rejection above 0.4% 7. HGI: 50 approx 8. Size 0 - 50 mm: 90% min
Air Dried Base Like It is Dry Base Received Analysis Moisture 3.25 Total Moisture % 7.93 By weight Ash, % by weight 5.93 5.63 6.12 Volatile Matter, 37.91 36.07 39.18 % by weight Fixed Carbon (by difference), % by 52.92 50.37 54.70 weight Sulfur, % by weight 0.78 0.74 0.81 Gross Heating Value. 13425 12775 13876 (Btu/Lb) Gross Calorific Power 7458 7097 7709 (Kcal/Kg) Gross Calorific Power. 31.23 29.71 32.28 (GJ/Ton) Gross Heating Power 31226 29714 32275 (J/g)
STEAM COAL / THERMAL COAL ICI 4 GAR : 4200 - 4900 Kcal/Kg Moisture : Max 40% (ARB) Ash Content : Max 6% (ARB) Volatile Matter : 28% - 38% Fixed Carbon : 20% - 45% Sulphur : Max 0.4%
Available products: STEAM COAL (4500-6700 kcal), D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us!
Available Colombian Thermal Coal Offered for Sale Effective 6/10/2022 # RESOURCE BTU PORT TYPE TONNAGE/MO. PRICE SULFUR ASH MOISTURE 1 RB-1 (F) 10,400 Bolivar/Brisas Thermal B 100K MT (3 Yrs) $MT 0.65% 9.2% 8.8% 2 RB-1 (F) 10,800 Bolivar/Brisas Thermal B 40K MT (Spot) MT 0.78% 5.5% 7.7% 3 RB-1 (F) 12,400 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.67% 4.5% 5.9% 4 RB-1 (F) 12,661 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.89% 6.7% 3.8% 5 RB-1 (F) 12,675 Bolivar/Brisas Thermal A 100K MT (3 Yrs) MT 0.41% 1.8% 7.1% 6 RB-2 (T) 13,200 Bolivar Thermal A 180K MT (3 Yrs) MT 0.94% 3.3% 10.6% All Thermal Coal Listed Above Subject to Prior Sale This is our most recent distribution sheet outlining available thermal coal we have directly ex. Colombia, SA. These long-term and spot allocations are structured through our established production network. We can deliver product to the vessel less expensively than in the US due to lower labor cost and excessive US logistics charges. (Rail/Barge)
Steam coal, also called thermal coal, refers to the coal used in boilers to produce steam that can be used for various purposes. Steam coal is a derivative of coal, as a black stone that burns when exposed to high heat. Coal is used throughout the world today as a primary source of energy and is naturally found as sedimentary rock The types of coal that we can supply are 5 types according to the Indonesian Coal Index (ICI), namely as follows: ICI-1 â?¢ GAR : 6500 â?¢ NAR : 6200 â?¢ Sulfur : Up to 1% â?¢ Ash : Up to 12% â?¢ Total Moisture : Up to 12% ICI-2 â?¢ GAR : 5800 â?¢ NAR : 5500 â?¢ Sulfur : Up to 0.8% â?¢ Ash : Up to 10% â?¢ Total Moisture : Up to 18% ICI-3 â?¢ GAR : 5000 â?¢ NAR : 4600 â?¢ Sulfur : Up to 0.6% â?¢ Ash : Up to 8% â?¢ Total Moisture : Up to 30% ICI-4 â?¢ GAR : 4200 â?¢ NAR : 3800 â?¢ Sulfur : Up to 0.4% â?¢ Ash : Up to 6% â?¢ Total Moisture : Up to 40% ICI-5 â?¢ GAR : 3400 â?¢ NAR : 3000 â?¢ Sulfur : Up to 0.2% â?¢ Ash : Up to 4% â?¢ Total Moisture : Up to 50%
Steam coal: Coal burned, primarily in boilers, to generate steam for the production of electricity or for process heating purposes, or used as a direct source of process heat. Steam coal, also known as thermal coal, refers to all coal not classified as coking (or metallurgical) coal. See coal grade.
We inform our real intention to sell and deliver Type A Thermal Coal Ore, following international procedures under the following Terms and Conditions: Product: THERMAL COAL TYPE A Origin: Colombian Minimum Quantity: 30,000 Tons in 45 days (+/-) Full Contract: 12 months extendable, at the end of each period and increase in quantity if the parties so Price: Negotiable Port Delivery: FOB â?? Available Port â?? Lycan 45 days after firm contract Port of Destination: Any port Quality of product: Type A 7200-7400 Ptu/Kg Ptu/lb14400-14800 Ash: less 10% Sulfur: less 1.00% Volatile: Between 38.6-40.5%. Inspection: Inspection of quantity and quality by a certified laboratory for export: (SGS) or similar at the port of loading, on the ship loaded at the buyer's expense.
We are a coal mining company with millions reserve of steam coal with GCV 3700-3800 Kcal based in Palembang, Indonesia. Minimum order quantity is 100,000 MT/month Price will be referring to the ICI 4 during the agreement process Payment method: FOB on barge with document against payment collection (D/P) Shipping term: FOB
.Fix carbon 95% Calcined anthracite coal for sale Anthracite Filter Media is thoroughly selected from anthracite which yields the highest percentage of carbon. It is then hydraulically classified to reduce mineral matter and ash to a minimum, and finally screened and washed to ensure suitability for filtration purposes. Anthracite filter coal or Anthrafilt is commonly used as sub-fill and as a component of multi-media filters. Anthracite filter media is a durable media with long life and a wide temperature range. It contains no silica to interfere in the production of ultra pure water. Anthracite promotes higher service flow rates and longer filter runs with less head loss than single media filter beds. Backwash rates are reduced as well. Low uniformity coefficient anthracite filter media extends the life of your filter before the media must be changed out. Higher service flows and longer filter runs than equivalent sand filters. â?¢ Unique density allows Anthracite to be combined with other filtration media in multi-media filters. â?¢ Lower uniformity coefficient has less oversized and undersized particles resulting in a highly uniformed bed. â?¢ Due to its medium density, Anthracite can be used in multi-media bed filters providing a unique pre-filtration layer. Anthracite coal filter media Application Anthracite Filter Media is widely used in the process of water quality treatment before and after the production of chemical, metallurgical, thermoelectric, pharmaceutical, papermaking, printing and dyeing, food and so on.
Steam Coal Direct From INDONESIA One of Non-renewable energy source that we also provide is coal. We collaborate with local coal mining companies in Jambi and has been through from the upstream to the downstream area of Jambi city, Indonesia . We provide a varieties of calorific and specification available . We always ensure quality good control of the process from start to delivery guaranteed to the client . Shipping terms : FOB / CNF . contract 1 year.
We express our interest in the sale of type B colombian thermal coal. We are prepared to start negotiations as soon as possible, based on the following proposal: PRODUCT: Type B thermal carbon QUANTITY: 60,000 MT 45 days ORIGIN: Cucuta (Colombia) FOB DESTINATION: Puerto Nuevo PRICE: Negotiable INSPECTION:SGS HEATING POWER: 10,000 - 12,600 BTU with technical data sheets DELIVERIES:Daily CONTRACT DURATION: 1 year renewable METHOD OF PAYMENT: FOB - MT 760 - SBLC
Activated carbon, also known as activated charcoal, is a form of carbon processed to have small, low-volume pores that increase its surface area. This increased surface area makes activated carbon highly effective for adsorptionâ??a process by which molecules and ions adhere to the surface. Here are some key points about activated carbon: Production: Activated carbon is typically produced by heating carbonaceous materials, such as wood, peat, coconut shells, or sawdust, in the presence of a gas that does not react with the material, creating a porous structure. Porous Structure: The activation process creates a highly porous structure with a large surface area. This structure allows activated carbon to adsorb a wide range of substances onto its surface. Adsorption Properties: Activated carbon is widely used for adsorbing various impurities and contaminants from liquids and gases. It can effectively remove organic compounds, chemicals, odors, and even some metals. Applications: Activated carbon finds diverse applications in various industries, including water treatment, air purification, food and beverage processing, pharmaceuticals, and environmental cleanup. It is used in water filters, air purifiers, gas masks, medical treatments, and more. Water Purification: Activated carbon is commonly used in water treatment processes to remove impurities, chlorine, organic contaminants, and undesirable odors, improving the taste and quality of water. Air Purification: In air purification systems, activated carbon filters can capture and remove volatile organic compounds (VOCs) and other airborne pollutants, contributing to cleaner air. Medical Uses: Activated carbon is used in certain medical treatments and poison control efforts. It can be administered orally to absorb toxins in the gastrointestinal tract. Gold Recovery: Activated carbon is also used in the gold mining industry for the recovery of gold from cyanide solutions. Environmental Remediation: Activated carbon is employed in environmental cleanup efforts to adsorb pollutants from soil and water, aiding in the remediation of contaminated sites. Reactivation: Activated carbon can sometimes be regenerated or reactivated after use by exposing it to high temperatures to remove adsorbed impurities, allowing it to be reused. Activated carbon's versatility and adsorption capabilities make it a valuable material in numerous applications where purification and removal of contaminants are essential.