Stainless Steel Powders Suppliers and Manufacturers

MF: SS420 Chemical Name: Stainless Steel Powders Purity: > 99.99% APS: 40-50 µm (Size Customization possible) Form Micro powder CAS Number 12597-68-1

ABOUT THE METAL SAND 1. Prolong service life of components so as to reduce production cost remarkably. The service life of metal sand as filter material is extended over 3 times than conventional filter materials such as glass bead,sea sand and silicon carbide. 2. Thanks to its high degree of profile ,large specific surface and strong impurities filter capability,the use of metal sand prolongs the service life of components,reduces use of auxiliary materials(strainer and washer,etc.)related to components,cleaning expenses of components and consumption of manpower as well as loss of capacity,etc. 3. Decrease the rate of broken filament and end breakage,the characteristic of irregular concave-convex acute angle in metal sand is far advantageous over conventional filter materials,such acute angle is very high in hardness and not easy to deform under 40Mpa pressure and can well puncture air bubbles in melt and obstruct foreign matters and coagulated particles so as to improve filter precision. 4. Stabilize pressure on components and the process of pressure rise is slow and stable to avoid fluctuation of production and unstable quality due to unstable pressure,and thus metal sand will not change its shape with changes of melt pressure and temperature. 5. Enhance homogeneity and spinnability of melt,stainless steel is a good conductor of heat and can guarantee homogeneity and consistence of temperature of high-temperature melt in sand bunker of components. 6. Stable chemical properties prevent adverse reaction with polyester melt. 7. Convenient use without need of cleaning and drying required for glass bead,sea sand and silicon carbide.We have conducted high-pressure cleaning process during production,so the delivered products are free of dust. THE CONTENT OF ElEMENTS Elements C Cr Ni Mo Si Mn Fe Qualified scope% 0.1-0.2 17-22 4-13 1-3 1.5-3 0.4-0.7 Basicingredient Note:metal contents can be adjusted in accordance with the requirements of customers. PACKING DENSITY(UNIT:(G/CM3) Size micron(micron) Size mesh(mesh) Density(g/cm3) 1651-833 10-20 1.2-1.5 833-350 20-40 1.6-2.0 350-245 40-60 1.65-2.3 245-198 60-80 1.7-2.6 198-165 80-100 1.8-3.2 NOTE: A. Testing method for packing density:place an empty beaker in a certain size cm3 rest on platform,and the metal sand in corresponding size fall freely into the beaker at a place in distance of 20cm from the opening of beaker.Stop falling of sand when the beaker is full of sand with a slight overflow,strike off along the opening of beaker with a flat ruler and weigh the sand,divide the weighed net grams by the volume of beaker is the packing density of this size. B. The above packing density is only for reference,specific packing density for practical use should be determined according to the requirements of enterprises for production sizes and pressure on components.The established sized and corresponding packing densities by both parties should not be altered at discretion and be regarded as important indicators for inspection of incoming and outgoing goods by both parties. C.In addition to common sizes,screening and matching can be performed as required by customers. APPLICATION METHOD OF METAL SAND 1. This metal sand has been strictly cleaned and screened during production without need of cleaning and screening once more during application. 2. Before assembly sizes should be seen clearly and confirmed without error. 3. At the end of each application,please well bind internal bag for residual metal sand to avoid entry of dust and impurities to affect normal use. 4. Several sizes can be used in layers,either one size can be used independently.For matching use of a few sizes,it would be the best to separate with corresponding single-layer stainless steel mesh between layers for better filter effect.The closer to the spinning head,the higher the meshes of sand (the thinner the sand). 5. In accordance with the requirements of productive technology,weigh metal sand and put into sand bunker,knock the case of sand bunker in all directions with copper rod to let sand increase density under vibration,and then compress the surface of metal sand in sand bunker with even end of stainless steel bar (which is approximate 15cm long and must be smooth and glossy)with diameter slightly less than that of sand bunker,and apply approximate 10kg pressure clokwise or anticlockwise and rotate to level the surface of metal sand,afterwards place a dedicated sand pressing bar with smooth and glossy surface in diameter of 1.5mm less than the inner diameter of sand bunker under the press to squeeze metal sand with a pressure of about 11Mpa to maximize its density.Nonhomogeneous densities and different sizes of dischargde filaments in the same sand bunker should be avoided. 6. During assembly of compinents the sand bunker must be filled with metal sand without void,which especially important for assembly of combination of a few sizes. 7. When the metal sand manufactured by our company is used,the speed of pressure rise of components is low and even the pressure does not rise for long time,this is a normal phenomenon;after the pressure rises up to the maximal technological pressure,please replace compinents in time in case that minconforming products are manufactured. 8. This product is a one-off product and cannot be reused after the first use. 9. Since the service life of components is longer due to use of metal sand manufactured by our company,so enterprises using the metal sand should make follow-up records for components loaded in machine.For convinience of quality management,it would be the best to replace components up to the approved service cycle(because as of now it is impossible for chemical fiber enterprises to install pressure gauge at each position),and meanwhile regular silicon dressing of spinning plates should be conducted in order to ensure stable quality and normal continuity of production. SAMPLE FIGURE OF STAINLESS STEEL METAL SAND UNDER HIGHLY MAGNIFYING ELECTRONIC GLASS 50KG

Product Type Particle size Packing Carbon (%) 304 10-300UM 5Kg, 25Kg, 50Kg =0.07 304L 10-300UM 5Kg, 50Kg =0.03 316 10-300UM 5Kg, 25Kg, 50Kg =0.08 316L 10-300UM 5Kg, 50Kg =0.03 403 10-300UM 5Kg, 25Kg, 50Kg =0.15 302 10-300UM 5Kg, 25Kg, 50Kg =0.15 430 10-300UM 5Kg, 25Kg, 50Kg =0.12 17-4PN 10-300UM 5Kg, 25Kg, 50Kg =0.07 420 10-300UM 5Kg, 25Kg, 50Kg 0.3~0.4 317L 10-300UM 5Kg, 50Kg =0.08 410 10-300UM 5Kg, 25Kg, 50Kg =0.15 Note: We can supply different size products of Stainless Steel Powder according to client's requirements.

Product Introduction Stainless steel powder sinter filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1m-100m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:

Stainless steel powder sintered filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1 m-100 m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:

Mainly used in petrochemical, environmental protection and other industries as a filter material, porous electrode materials, sound-absorbing material, divergent cooling materials, cushioning materials to use. Stainless steel powder sintered filter plate ambient temperature:

Stainless Steel powder sintered filter flange conection material:304/316/316L specifications: According to Order Precision:2to 80um

Product Name: -300+500mesh Gas Atomized 17-4 PH Stainless Steel Powder Material: Ferro Base Alloy Shape:Spherical Powder Standard:ISO9001 Particle Size: -300+500mesh Storage: Vacuum Packaging / Iron Barrel Email: sales06@cstijo.com Size can be customized.

Stainless steel powder sintered filter tube is a high-efficiency filter, which is made of stainless steel powder through pressing, sintering and other processes. Whether it is food, medicine, chemicals or oil and gas, stainless steel powder sintered filter tubes can provide reliable filtration solutions to ensure product quality and safety. Parameters Material: 316L Diameter: 60mm Length: 1500mm Pore size: 20 micron Technique: sintering Features High filtration precision: Stainless steel powder sintered filter tube has fine filter pore size, which can achieve high-precision filtration effect. Its pore size can be customized according to needs, usually at the micron level, and can effectively filter out tiny impurities such as particles, suspended solids and microorganisms. Strong corrosion resistance: Because it is made of stainless steel material, the stainless steel powder sintered filter tube has excellent corrosion resistance. It can withstand harsh environments such as acids, alkalis, high temperatures and corrosive gases, and is not prone to rust and damage, ensuring long-term and stable filtration effects. High strength and pressure resistance: The stainless steel powder sintered filter tube adopts a special manufacturing process and has high strength and pressure resistance. It can withstand high working pressure and is not easily deformed or broken, ensuring reliable operation in high-pressure environments. Easy to clean and maintain: Stainless steel powder sintered filter tube has a smooth surface and good self-cleaning performance, making it easy to clean and maintain. Through simple flushing or backflushing, impurities on the filter surface can be removed, the filter's working efficiency can be restored, and maintenance costs and downtime can be reduced. Application Food and Beverage Industry: Stainless steel powder sintered filter tubes are widely used in the food and beverage industry. It can be used to filter juice, wine, drinking water and other liquids to remove suspended solids, microorganisms and odor substances to ensure the clarity and purity of the product. Pharmaceutical and biopharmaceutical industry: In the pharmaceutical and biopharmaceutical fields, stainless steel powder sintered filter tubes are used for filtration and purification of medicinal liquids. It can effectively remove microorganisms, bacteria and tiny particles to ensure the purity and safety of medicines.

Product Introduction The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and sintered under high temperature and vacuum conditions. The resulting filter element contains countless micropores that are curved, crisscrossed, and highly precise, allowing for deep-level precision filtration through pressurization. The stainless steel filter is a highly advanced type of metal porous filter element that is widely used across many industries, including petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification industries. Product parameters Outer diameter: 20~100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1. Precise and uniform porosity 2. Excellent mechanical properties 3. High-temperature resistance 4. Easy to regenerate Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry.

Bags¡ê¬avoiding damp 1kg, 5*5*1

The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.

1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. Feature: the material contains a large number of connected or semi-connected pores, the pore structure is composed of regular and irregular powder particles, the size and distribution of pores and the size of porosity can be adjusted according to the powder particle size combination and preparation process to meet the actual needs of customers. 2.3. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3.4. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials,noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalyst in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions.

Vacuum feeder also known as vacuum conveyor, is a kind of dust-free airtight pipeline conveying equipment which transfers particles and powder materials by means of vacuum suction. It uses the difference of air pressure between vacuum and environment space to form gas flow in the pipeline, and drives the movement of powder materials, so as to complete powder conveying.

Polished stainless steel powder filter elements are manufactured using high-quality stainless steel powder that has been processed using advanced technology. These filters have a uniform structure with high porosity and pore diameter ranging from 0.2�¼m to 100�¼m, and porosity between 35% to 60%. Polished stainless steel powder filter elements are available in various shapes and sizes, including cylindrical and disc-shaped. The cylindrical filter elements have a diameter ranging from 10mm to 1000mm, while the disc-shaped filter elements have a diameter ranging from 5mm to 300mm. The filter elements generate uniform filtration and have low resistance, which reduces energy consumption. Products Parameters Material: S304/SS316L Outer diameter: 5~300mm Length: 10~1000mm (more than 1000mm can be welded) Filtration accuracy: 0.2um~100um Surface treatment Polished Inlet/outlet connection Screw thread, flange Features durability, corrosion resistance, and high-temperature tolerance can be cleaned and reused multiple times Additionally, the polishing process helps to create a smoother surface, which can improve the filter's efficiency and reduce the risk of clogging. Compatibility: Polish stainless steel filters are compatible with a wide range of liquids and gases, including corrosive and high-temperature fluids. They are also resistant to many chemicals, making them suitable for use in harsh environments. Products Applications Food Industry: Polish stainless steel filters are commonly used in the food industry to remove contaminants such as bacteria, yeast, and sediment from liquids. They are used in various applications, including filtering wine and beer, filtering cooking oil, and clarifying juices and syrups. Pharmaceutical Industry: In the pharmaceutical industry, Polish stainless steel filters are used to remove impurities and particles from liquids used in drug production. They are also used in sterile filtration to remove microorganisms and other contaminants from pharmaceutical solutions. Water Treatment: Polish stainless steel filters are used in water treatment to remove impurities and particles from water. They are commonly used to filter drinking water, wastewater, and industrial process water. Compatibility with Extreme Temperatures: Polish stainless steel filters are compatible with extreme temperatures, making them suitable for use in high-temperature applications. They can withstand temperatures up to 1000 F (538 C) and are commonly used in applications such as high-temperature gas filtration.

ABOUT THE METAL SAND 1. Prolong service life of components so as to reduce production cost remarkably. The service life of metal sand as filter material is extended over 3 times than conventional filter materials such as glass bead,sea sand and silicon carbide. 2. Thanks to its high degree of profile ,large specific surface and strong impurities filter capability,the use of metal sand prolongs the service life of components,reduces use of auxiliary materials(strainer and washer,etc.)related to components,cleaning expenses of components and consumption of manpower as well as loss of capacity,etc. 3. Decrease the rate of broken filament and end breakage,the characteristic of irregular concave-convex acute angle in metal sand is far advantageous over conventional filter materials,such acute angle is very high in hardness and not easy to deform under 40Mpa pressure and can well puncture air bubbles in melt and obstruct foreign matters and coagulated particles so as to improve filter precision. 4. Stabilize pressure on components and the process of pressure rise is slow and stable to avoid fluctuation of production and unstable quality due to unstable pressure,and thus metal sand will not change its shape with changes of melt pressure and temperature. 5. Enhance homogeneity and spinnability of melt,stainless steel is a good conductor of heat and can guarantee homogeneity and consistence of temperature of high-temperature melt in sand bunker of components. 6. Stable chemical properties prevent adverse reaction with polyester melt. 7. Convenient use without need of cleaning and drying required for glass bead,sea sand and silicon carbide.We have conducted high-pressure cleaning process during production,so the delivered products are free of dust. 50KG