Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc.With hydro-automatic feeding device, and high drilling efficiency. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. Close levers, convenient to operate, safe and reliable operations.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas.
1. Drilling machine full hydraulic drive, easy operation and flexible, easy to shift, good mobility, saving time and effort; 2. Drill rotator with dual hydraulic motor drive, the output torque, greatly improving the drilling rig rigidity; 3. The new angle mechanism makes the hole more convenient, adjust the scope of larger, can reduce the requirements of the face; 4. With a dedicated drill pipe with drill (drill pipe, sleeve, eccentric drill, etc.), in the unstable formation with casing wall openings, conventional ball teeth drill hole; 5. The rig can be directly connected with the hydraulic station, the structure is simple; the hydraulic station frame is equipped with a roller, which is easy to move and relocate. The engine is composed of three parts: host, hydraulic station and console.
Product description The ST-200 drilling rig is a lightweight shallow hole rig with oil pressure feed. Suitable for census exploration, geophysical exploration, road and building exploration, and small well drilling. 1. It has automatic hydraulic feeding mechanism to improve drilling efficiency and reduce labor intensity. 2. The use of ball card type clamping mechanism, can achieve non-stop bar, easy to operate, safe and reliable. 3. The handle is concentrated, easy to operate. It is equipped with a bottom pressure gauge to indicate the pressure, which is convenient for grasping the inside of the hole. 4. Compact structure, the drilling machine, water pump and power machine (diesel or electric motor) are assembled on the same base, occupying a small area of the airport. Light weight, high decomposability and easy to move.
Product Introduction 1. Drills up to 100-200m deep, 75-500mm diameter. 2. Full hydraulic system and crawler mounted, easy to operate and move. 3. Drill on soil, sand, rock, quarry, marble and any hard ground. 4. Used to drill for water well, geological exploration, soil sample taking, SPT Test, etc. Main features 1. Hydraulic-control drill mast,can be raised and put down by hydraulic cylinders, which saves time and worker labor. 2. Rubber track, the weight is lighter and does not hurt urban road, suitable for projects in city. 3. Four hydraulic jacks, can lift the machine to mas height 1.3m, so that the machine can be loaded from truck compartment. Also they can be used for rig leveling and support at work. 4. 24V electric-start diesel engine reduces the operator's labor intensity. 5. Independent BW-160 mud pump , has bigger flow displacement and pressure, easy maintenance. 6. Optional installation of hydraulic twist tube machine(75-168mm)imporve work efficiency and reduce labor costs.
Product Description: 1.general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2.With hydro-automatic feeding device, and high drilling efficiency. 3.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4.Close levers, convenient to operate, safe and reliable operations. 5.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: rated drill depth 200m open hole diameter 200mm, max. 300mm spindle rotation speed 118/236/505/1010 rpm max. output torque 1500 N.m max. lifting weight (single wire) 17 KN drill rod diameter 42/50 mm hole angle 90~75º size (L x W x H) 1433 x 697 x 1273mm weight 500 kg diesel model S1100
Product Applications: 1.Construction drilling of the projects e.g. prospection, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction 2. Coal mining exploration, Ore exploration 3. Small hole diameter water well drilling 4. Geothermal pipe-installing for heat pump 5. Small-diameter hole foundation piling drilling;
Product Features: 1. Integrated crawler traveling device, mud pump, control panel into one whole; 2, Caterpillar walking, base support, mast landing are all driven by the hydraulic system of drilling rig, it is easy to operate; 3. It is easy to move around and from or to at work site, improve the drilling efficient, and reduce the intensity of labor; 4. Mast landing, folding function for easy walking and transportation. 5. Have more speeds (8-speed), reasonable speed range, and big torque at lower speed, wide applications; 6. Having two reverse speeds, it is easy to handle the accidents. 7. The feed stroke of spindle is 600 mm, help to improve drilling efficiency, reduce blocking and burning of bit, easy to handle drilling accidents. 8. Twin-gear oil pump to supply oil for the hydraulic system of drilling rig, less power consumption, lower temperature of the hydraulic system. 9. Few control levers, reasonable layout, flexible and reliable manipulation. 10. Have normally a closed hydraulic chuck, also equipped with a lower mechanical manual chuck.
This equipment is a kind of full multifunctional and steady function deep core drilling rig.It suitable for alloy/diamond core drilling,widely used for exploration and gelogical survey,construction project,water-power engineering project,highway,railway and seaport drilling project.Also suitable for drill a water well . Advantage of this machine: 1. Adopt auto vehicle transmission and cluth,good speed gear,easy operation. 2. Taper clutch with outstanding transmission torque, easy operation and maintenance-free features 3. With light structure,easy disassemble,convenient to move. 4. Four sets of bearing positioning of the vertical axle box ensure that the gyrator has sufficient rigidity to deal with complex geological conditions such as gravel layer and pebble layer.
Product Application 1.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction; 2. Coal mining exploration, Ore exploration; 3. Small hole diameter water well drilling; 4. Geothermal pipe-installing for heat pump; 5. Small-diameter hole foundation piling drilling Product Feature: 1. Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2. With hydro-automatic feeding device, and high drilling efficiency. 3. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4. Close levers, convenient to operate, safe and reliable operations. 5. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas.
Product Feature: 1. With a hydraulic feeding mechanism, the pump mechanism and the reverse function, improve drilling efficiency, reduce labor intensity. 2. The rig is equipped with a ball with a cassette holding mechanism of six-party initiative to drill, can implement non-stop down the pole, high efficiency, safety and reliability. 3. bottom hole pressure gauge with pressure, easy to grasp hole situation. 4. handle centralized, easy to operate. 5. Compact rig structure, small size, light weight, easy to disintegration and handling, for the plains or mountain areas. 6. vertical shaft to form structures Plus, vertical through-hole diameter increased by a larger diameter drill, better adapted to high torque transmission. 7. The electric start diesel engine, convenient and secure.
We are supplier and exporter of Industrial Salt. In Textile industry, industrial salt as dye-enhancer for textiles is used during the manufacture, processing and refining of fabrics and materials, such as for example, dying cotton or the printing of materials. Industrial salt as dye-enhancer for fabrics ensures that the color fully penetrates the fabric and is better bound and looks after the corresponding dyeing process. Industrial salt is used in the oil industry for drilling rig, pharmaceutical industry in making capsules, in textile, metal, FMCG, paper and leather industries.
1.The Brief Introductions of QZ-3 geological engineering drilling rig The QZ-3 geological drilling rig is independently developed by Shandong Master Machinery Group Co.,Ltd., which is a portable multi-purpose drilling rig. The QZ-3 portable drill is equipped with a hoist, which is more convenient for geological drilling and lifting. It can do standard drilling hole, earth sampling and cone penetration with the heavy hammer. The QZ-3 portable geological drilling rig uses diesel power, and it is more convenient to purchase oil. The rig is reasonable in design, advanced in structure, easy to assemble and disassemble, small in size, light in weight and easy to transport, which brings great convenience for field investigation and construction. 2. The Specifications of QZ-3 geological engineering drilling rig QZ-3 portable geological engineering drilling rig Borehole diameter (mm) 46-110
Product Application: Drilling water well, geological exploration and road and railroad construction and building engineering construction project. hydraulic drilling rig is a new type of core drilling rig which is developed especially to meet the need of various drilling process mainly in diamond drilling, the power machine of which can be either motor or diesel engine. Product Advantage: 1. This machine gained 3 national practical new-type patents invention. 2. To be equipped with hexagonal vertical shaft and hexagonal drive drilling rod, with strong rigidity and big transfer torque. 3. To be provided with cone plate friction clutch, being facile to operate, with big transfer torque. 4. To adopt rolling bearing type hoist, with wide brake band and big lifting capacity. 5. To be equipped with speed reducer and sludge pump, being integrated structure. 6. The entire machine is featured by strong adaptability, high motive power, low cost and broad compatibility. 7. To be provided with hydraulic control pressure feed mechanism for the purpose of improvement of construction efficiency. 8. To use hydraulic control well head displacement mechanism for enlargement of initial hole diameter.
Product Description: xy-2 is a core drilling rig for middle and shallow hole. It applies not only to alloy and diamond core drilling with different calibres but also can be used for geological prospecting works, drilling of fluid mineral in superficial layer and shot holes and ventilation holes drilling, drilling on hydrology, water wells and big calibres. It has been widely used on areas such as road and railway construction, water resources and hydropower and architecture. Product Feature: With hydraulic automatic feeding device, elevated drilling efficiency. The holding mechanism with upper spherical jaws is used as substitute for chuck. The rod can be replaced without shutdown. Centralized handles, easy operation, safe and reliable. The drilling machine, pump and diesel engine are installed on a common base frame in order to have a compact structure and occupy small field area. 5 lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
Used for general investigation, geophysical exploration, highway and building construction, and blast-hole drilling etc. With hydro-automatic feeding device, and high drilling efficiency. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. Close levers, convenient to operate, safe and reliable operations. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas
Brand: HUANYU Model: XY-200 Drilling depth: 0 - 200 meter Weight: 730KG Hole diameter(Soil): 200-400mm Hole diameter(Rock): 75 - 170mm Water Well Drilling or Take rock core sample in mining exploration, geological survey. XY-200 drilling rig is a multiple purposes light drilling rig. XY-200 is a model developed on the basis of XY-1A, which is integrated with a hydraulic tower system. The rigs are widely used for geological engineering investigation in various projects like water well, industrial and civil construction, railway, bridge, hydropower etc., and also for small diameter pile hole boring and anchor hole drilling. Features: 1): wide range of R.P.M. and well-set gear 2): large torque in low R.P.M., suitable for core drilling and piling hole drilling and piling hole works. 3): mobile cylinder installed so that the drilling machine has a free travel of 400 mm, ensure easy operation of drilling stems 4): easy to handle, high efficiency, oil hydraulic feeding 5): stable and solid drilling tower with fewer single components. Easy for transportation and flexible in drilling angle adjustment (features of hydraulic tower, model XY-200) 6): optimized structures, small volume and light weight.
1. Applications of XY-200 hydraulic core drilling rig Geological survey, geophysical exploration, road and high-rise building foundation exploration, wells, blasting holes and other drilling projects. 2. Parameters of XY-200 hydraulic core drilling rig Maximum opening diameter 400mm Maximum borehole depth 200m Diameter of the end hole 75mm Borehole dip angle 90-75° Machine overall size 2.75*0.95*1.60m Drill pipe diameter 50mm Weight of drill rig diameter of drill pipe (without power) 760kg
1. Characteristics of XYD-200 crawler hydraulic core drilling rig ·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits. ·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement. ·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working. ·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly. ·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country. 2. Technical parameters of XYD-200 crawler hydraulic core drilling rig XYD-200 crawler hydraulic core drilling rig Drilling depth 200m Maximum opening diameter 75-300mm Final hole diameter 75mm Kelly 53/59*4200mm Drill pipe diameter 50/60mm Drilling angle 90°-75° Auxiliary power diesel engine 16.2kw 2200r/min Structural weight/Size 3000kg 3800*1950*2700 Spindle Spindle speed 64/128/287/557r/min Spindle stroke 450mm Windlass Single rope lifting force 24kn Single rope lifting speed 0.12/0.22/0.49/0.95m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 35m Derrick Rated load 5t Effective height 6m Tower leg specification 89mm
1. Characteristics of XYX-200 wheeled hydraulic core drilling rig ·hydraulic cylinder, high efficiency ·wheeled walking mechanism, very convenient for transport and adjusting the drilling rig level. ·pressure gauge display the condition of the bottom of the drill hole. ·the drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. ·the working efficiency is high and the operation is convenient, safe and reliable. 2. Technical parameters of XYX-200 wheeled hydraulic core drilling rig XYX-200 wheeled hydraulic core drilling rig Drill hole depth 200m Maximum opening diameter 300mm Final hole diameter 75mm Drill pipe diameter 60mm Borehole inclination 90°-75°v Rig weight (without power) 1300kg Trigonometric belt B950*4 B1700*3 Active moving distance 300mm Power Diesel engine/motor 22hp/16.2kw A vertical scroll of painting Shaft rotation speed 64/128/ 287/ 557 r/min Vertical axis stroke 450mm Windlass Maximum lifting weight of single rope 2400kg Single rope lifting speed 0.41/ 0.82/1.64m/s Wire rope diameter 13mm Wire rope capacity 35m Hug floodgate caliber 260mm Hug floodgate belt width 70mm Mud pump Type Horizontal single cylinder double action Maximum displacement Diesel engine 170L/min Matching motor 150L/min Maximum pressure 3Mpa Work pressure 1.5Mpa Inlet pipe caliber 40mm Outlet pipe caliber 30mm Triangle conveyer belt B1728mm Type CBT-F-314 Triangle conveyer belt B1100*1
1. Applications of XY-200 hydraulic core drilling rig Geological survey, geophysical exploration, road and high-rise building foundation exploration, wells, blasting holes and other drilling projects. 2. Parameters of XY-200 hydraulic core drilling rig Maximum opening diameter 400mm Maximum borehole depth 200m Diameter of the end hole 75mm Borehole dip angle 90-75° Machine overall size 2.75*0.95*1.60m Drill pipe diameter 50mm Weight of drill rig diameter of drill pipe (without power) 760kg A vertical scroll of painting Shaft rotation speed 71/142/310/20r/min Vertical axis stroke 450mm Windlass Maximum lifting weight of single rope 2008kb Drum lifting speed 17/35/75/160 rm/s Wire rope diameter: 13mm Wire rope capacity 35mm Width of sluice 70mm Mud pump Type: horizontal single cylinder double action flow Maximum pressure 1.5mpa Working pressure 0.7mpa Inlet size 50mm Outlet pipe diameter 45mm Power Diesel oil 22hp Rated speed 2200r/min Electric machinery 15kw Rated speed 1460r/min
