Magnetron Sputtering coating line for low-e glass http://www.pvd-metallizer.com Adopting the principle of magnetron sputtering E-discharge, this Vacuum Coating Production Line can coat metallic film or compound films on the surface of large-sized glass, such as curtain wall glass or architectural glass, forming the glass with characteristics of sunshine shelter, temperature keeping, energy saving, low emission and decoration, etc. that has been extensively used high-rank architecture, act wall and room decoration, etc.
Hard low E is produced by spraying a chemical material with Tin componds on the melting glass surface to form single layer of compound film with certain low emissivity function. Applicationï¼? Architecture:� curtain wall, facade, windows and doors Home appliance: micro oven, refrigerator Advantage: Improved energy efficiency Less UV Reduced condensation Specification: Glass Thickness: 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm Max size:� 3300*8000mm Normal size:� 2134x3300mm, 2440x3300mm, Quality Standard: In accordance with CE, GB, AS/NIS 2208-1996
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Paints and Varnishes for Vacuum Metalizing Coating Our company is specialized in the research and development of varnishing and lacquering technique for PVD vacuum coating, in the promotion and application of PVD deposition technology. Up to now the company has successfully developed three categories of varnish curing methods such as self-curing under normal temperature, curing by heat and UV curing with nearly 200 different varnish or lacquering for vacuum base coating and top coating as well as related package products, which are extensively used in the wide fields of Christmas ornaments, toys, women's shoes, buttons, ceramics and resin crafts, building materials, wine packaging, cosmetics packaging, automobiles, motorcycles and mobile phones, laptops, digital cameras and other consumer electronic products by the process of vacuum PVD deposition. By nature the company is a private technology enterprise integrated into social life with research & development, manufacture, sales and service
Paints and Varnishes for Vacuum Metalizing Coating http://www.pvd-metallizer.com Our company is specialized in the research and development of varnishing and lacquering technique for PVD vacuum coating, in the promotion and application of PVD deposition technology. Up to now the company has successfully developed three categories of varnish curing methods such as self-curing under normal temperature, curing by heat and UV curing with nearly 200 different varnish or lacquering for vacuum base coating and top coating as well as related package products, which are extensively used in the wide fields of Christmas ornaments, toys, women's shoes, buttons, ceramics and resin crafts, building materials, wine packaging, cosmetics packaging, automobiles, motorcycles and mobile phones, laptops, digital cameras and other consumer electronic products by the process of vacuum PVD deposition. By nature the company is a private technology enterprise integrated into social life with research & development, manufacture, sales and service
Magnetron Sputtering Deposition Line for ITO Glass The machine line uses two industrial computers and PLC systems to dynamically display the whole operation process with alarm and self-protective functions. The important processing parameters with several optical inspected systems connected to the computer, so the color and thickness of the film can be automatically controlled. ITO Glass coating line: This machine are available to metalize transparent electric conductive film on glass, for example, LCD, PDP display or OLED display, etc. Using vacuum magnetron sputtering deposition technology, with dual cathodes, MF sputtering technology and international advanced control system, it is to deposit SiO2/ITO on the float glass. All the process is automatically controlled in series.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
JHG Ultra clear float glass is produced by less amount of iron in the molten glass formula. This type is more transparent than regular glass and it doesn't have that greenish tint. The less iron content can increase the light transparency.ultra clear glass is the best choice for architects and designers when need color-matching. Thickness is from 2-25mm Jumbo size 3660x18000mm
Tempered glass, laminated glass, mirror, acid etched glass, fritted glass, float glass, reflective glass, low e glass, patterned glass, glass bottle, glass jar, glassware, glass tube, glass cup.
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years. Main Specification (Customized size is acceptable.) 2mm thickness * 20mm width * 20mm roll length 2mm thickness * 30mm width *20mm roll length Main Color - black, grey, white Technical Data Product Series FOCUS-6200 Series Application Construction Industry Elongation - 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 25N/cm Tensile Strength 250KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages * Never hardening, maintain good waterproofing property with weathering resistance performance. * Excellent performance in waterproofing and sealing. * Good anti-aging performance effective life up to 20years. * Easy to apply. Applications * Provide waterproof and sealing protection forsteel structure construction. * Provide waterproof and sealing protection for door joints, window joints,roofs and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber. * Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
People nowadays prefer large-size window for sightseeing or for enjoying sunshine to relax. However, the heat runs off through the window at the same time. í¦It is not easy to make the best of both worldsí¦!í¡í¡Now ,the low-E glass appears to settle this problem. It has a high transmission of visible light and can reflect infrared heat at the same time, which can satisfy most people and architectures. The Low-E glass has the same coating principle as solar-control glass, but differs from them in material , the structure layer is also more complex ,demanding for equipment with super throughput and excellent accuracy in process control. The characteristic of Low-E glass is achieved by the silver layer. The oxidation of silver can result in the disappearance of low-E performance ; therefore ,low-E glass cannot be single used in the air ,which means it can only be made into combined glass. Color: Varying tones such as transparent, shallow gray, silver gray, green blue etc. Specification: Max size: 2540mmí-3760mm Mini size: 300mmí-800 mm Thickness: 5mm~19mm Feature: With high transmission of visible light, low reflectivity and low emissivity (e
Gluten free native and modified starches for all industries like food, cassava flour, tapioca starch (cassava starch),maize starch (corn starch ), corn flour, potato starch, pregeletinised starches, physically modified clean label starches for food, functional native starches, rs4 dietary fibre starches, resistant starches, maltodextrins, liquid glucose, high maltose corn syrup, dextrose monohydrate, brown, white yellow dextrin, food grade modified starches emulsifiers, starch for crispy coating, starch as thickeners, binders, moulding starch, oxidised starch, thin boiled starch, acid treated starch, starch glycerols, e 1412 phosphated starch, e 1413 phosphated distarch phosphate, e 1414 acetylated distarch phosphate, e 1420 acetylated starch, e 1422 acetylated distarch adipate, e 1440 hydroxy propylated starch, e1442 hydroxy propylated di starch phospate, e 1451 acetylated oxidised starch. we make chemicals free, preservatives free, trans fats free, msg free, foods.Research and development of value added starches for specific applications, gluten free ingredients for food, vegan, plant based products for foods, etc., we are customising our value added modified starches, clean lable starches & functional food ingredients for the applications as binders, thickeners, emulsifiers, stabilisers, gluten free food ingredients, products, vegan food products, plant based food products, alternative meat products, meat analogues, texturing agents, low glycaemic food products, probiotic prebiotic symbiotic food ingredients. we are a complete customised solution provider for all kind of food applications.
JHG solar glass including texture glass and flat glass, it is the nice performance low iron glass with high solar transmittance, and low reflection. After tempered, it will be the ideal choice for photovoltaics, solar thermal collector, and greenhouse. Size Maximum Size:1665*2200mm Minimum Size: 300*300mm Specifiction Main thickness  2-5mm Dimension tolerance ±1.0mm Thickness tolerance ±0.2mm Diagonal tolerance 0.2% Overall bow & 0.2% Iron content 110ppm Solar transmittance  from 91.5-99% (wavelength rang 380-1100mm) Hardness 4H
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made with tempered glass,laminated glass , with excellent drilling ,cutouts ,and polished edge The main products series : ** Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean **Tempered pattern glass The pattern bring distinctive decorative on the glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning **tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Easy cleaning **tempered low iron glass High light transparent with colorless appearance The glass blue edge make the whole shower enclosure in high grade **tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass ,we offer coated glass for avoid damage caused by water sediments
JH GLASS pattern glass is from 3mm-12mm , all is temperable quality , mainly used for glass table , cabinet, window,door ,indoor partition and curtain wall . the main pattern including nashiji,mistlite,karatachi,moru,hitchcross,chinchilla,watercube,rain,bamboo ,etc. the main size includes 1830x2440mm,1650x2440mm.
JHG design shelf glass with different style , functionality, durability ,and affordability ,to meet all clients inquiry . Glass shelves is necessary accent for the kitchen, bedroom, bathroom, furniture and home appliance in our life. All shelves including : Clear and white satin colors Polished and bevelled edges glass shelves Rectangular ,shape size and curved glass shelves Coloured glass with back painted Any sizes available Package : Wooden cases Carton with indicated logo Thermal plastic sealed package