The crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.PY series spring cone crusher is widely used for secondary and fine crushing in the fields of mining,building materials, metallurgies and so on. The PY series high-efficient cone crusher can crush materials with middle and high hardness, such as, metal ore, basalt, granite, limestone, cobblestone, sandstone and so on. 2.Features of Spring Cone Crusher: 1.Spring cone crusher has the advantages of reliable construction, high productivity, easy adjustment and less cost in operation. 2.The spring cone crusher release system of cuusher actsan overload protection system that allows tramp to pass through the crushing chamber without any damage 3.The cone crusher use two kinds of sealed formation: dry oil and water which can make plaster stone and engine oil seprated and assure reliable performance 4.The tcone crushing chamber depends on the size of deed and fineness of the crushed product. gyratory cone crusher price in india Technical Parameter: Type Diam-eter of crush-ing cone(mm) Max. feeding size(mm) Width of discharge opening(mm) Processing capacity(t/h) Motor power(kw) Swing frequ-ency of main shaft(r/min) Weight(t) Dimensions(L*W*H) (mm) PYB 600 600 65 12-25 40 30 356 5 2234×1370×1675 PYD 35 3-13 12-13 5.5 2234×1370×1675 PYB 900 900 115 15-50 50-90 55 333 11.2 2692×1640×2350 PYZ 60 5-20 20-65 11.2 2692×1640×2350 PYD 50 3-13 15-50 11.3 2692×1640×2350 PYB 1200 1200 145 20-50 110-168 110 300 24.7 2790×1878×2844 PYZ 100 8-25 42-135 25 2790×1878×2844 PYD 50 3-15 18-105 25.3 2790×1878×2844 PYB 1750 1750 215 25-50 280-480 160 245 50.3 3910×2894×3809 PYZ 185 10-30 115-320 50.3 3910×2894×3809 PYD 85 5-13 75-230 50.2 3910×2894×3809 PYB 2200 2200 300 30-60 59-1000 280-260 220 80 4622×3302×4470 PYZ 230 10-30 200-580 80 4622×3302×4470 PYD 100 5-15 120-340 81.4 4622×3302×4470 Any change of technical data shall not be advised additionally.
Jaw crusher, impact crusher, spring cone crusher, hydraulic cone crusher, sand washer, belt conveyor, vibrating feeder, vibrating screening, stone crushing & sand production plant.
Wheel type Mobile Cone Crusher Wheel type Mobile Cone Crusher is the symons cone crusher with advanced technology (spring cone crusher or multi-cyclinder hydraulic cone crusher is also optional). It is equipped with closed side adjustment device, which can quickly adjust settings for production of final product wtih size 10-45 mm. It is suitable for crushing of medium and hard materials. The grate screening bin or other fine crushing equipment can be equipped to meet the needs of different particle sizes. Wheel type Mobile Cone Crusher Features: 1. Stable performance, easy maintenance; flexible configuration; 2. Flexible and motorized parking function, and start the work mode quickly. 3. Newly add the high-efficiency hydraulic cone crusher with high process capacity. 4. Add the adjustable function of vibrating screen installation angle, and strengthen the whole machineâ??s production capacity. 5. Possess the crushing unit interchangeable system and screening unit interchangeable system, satisfy different kind of production need. Working Principle : Feed the material through feeder to cone crusher in regular way. After primary crushing, the material enters closed crushing circuit through inclined vibrating screen. The crushed material is conveyed out by the belt conveyor, and to be crushed continually. Mobile cone crusher station can remove inclined vibrating screen according to practical producing environment, and crush the material directly, in order to work together with other crushing equipment in a convenient and flexible way.
Wheel type Mobile Cone Crusher Wheel type Mobile Cone Crusher is the symons cone crusher with advanced technology (spring cone crusher or multi-cyclinder hydraulic cone crusher is also optional). It is equipped with closed side adjustment device, which can quickly adjust settings for production of final product wtih size 10-45 mm. It is suitable for crushing of medium and hard materials. The grate screening bin or other fine crushing equipment can be equipped to meet the needs of different particle sizes. Wheel type Mobile Cone Crusher Features: 1. Stable performance, easy maintenance; flexible configuration; 2. Flexible and motorized parking function, and start the work mode quickly. 3. Newly add the high-efficiency hydraulic cone crusher with high process capacity. 4. Add the adjustable function of vibrating screen installation angle, and strengthen the whole machineâ??s production capacity. 5. Possess the crushing unit interchangeable system and screening unit interchangeable system, satisfy different kind of production need. Working Principle : Feed the material through feeder to cone crusher in regular way. After primary crushing, the material enters closed crushing circuit through inclined vibrating screen. The crushed material is conveyed out by the belt conveyor, and to be crushed continually. Mobile cone crusher station can remove inclined vibrating screen according to practical producing environment, and crush the material directly, in order to work together with other crushing equipment in a convenient and flexible way.
The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (SDY) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing. Features and advantages: 1.Rational structure, advanced crushing principle and technical data, reliable operation and low operation cost. 2.High crushing ratio, high efficiency and high productivity. 3.Reliable spring security system, which can provid effective overload protection. 4.Double-crushing cavity, which meets large range of size requirements. 5.Manual -operating hydraulic discharge opening makes your work easy and economic.
Spring Cone Crusher Spring cone crusher is widely used in the metallurgy, construction, road building, chemical and other industries. It is suitable to crush the high or medium hardness rock and minerals, such as iron ore, cooper ore, limestone, quartz, granite, basalt, dolerite, etc. The type of crushing cavity depends on the usage of rock and minerals: the standard type applies to medium crushing; the medium type applies to fine crushing; the short head type applies to for super fine crushing Spring Cone Crusher Features: 1.Reasonable structure, low fault rateï¼?low operating cost; 2.Wide application, applying to crush kinds of raw material; 3.Reliable spring protection system can provide safety and efficient protection of overload; 4.Separate automatic oil lubrication system; 5.Low investment cost ,more economic. Working Principle : Spring cone crusher consists of frame, transmission device, eccentric hollow shaft, bowl bearing, crushing cone, adjusting device, concave holder, spring, hydraulic pressure station, etc. When the crusher works, the motor drives the eccentric shaft sleeve through the horizontal shaft and a pair of bevel gears. Under the forces of eccentric shaft sleeve, the shaft axis of crushing cone keeps in rotary pendulum moment, so that the space between the mantle and concave will regularly reduce and increase. Meanwhile, the raw materials are crushed under the forces of squeezing and bending.
Hydraulic series Cone Crusher custom Industrial hammer crusher Industrial hammer crusher factory � � � � � � DBM Hydraulic series Cone Crusher (Hydraulic) adopts computer optimization design to speed up main shaft speed. The unique crushing chamber replace system can quickly replace components in crushing chamber to meet different size requirement. The friction disc design and rotation of eccentric shaft bushing around fix cone plus more reasonable labyrinth seal system are unique features of HP series, which have more advantages like easier operation, larger application scope, more reliable, more smooth functioning comparing with spring and traditional cone crusher. Featuresï¼? Hydraulic Pressure Cone Crusher: 1. High crushing ratio and production efficiency. 2. Less spare part consumption and low operation cost. 3. Better finished product shape. 4. Hydraulic protection and hydraulic clearing, high automatization and less production stop and repairing time. 5. Thin oil lubrication makes the service time increase. 6. Manifold crushing cavity. 7. Easy maintenance and operation. 8. The crusher can provide customers a higher capacity, better product shape, and easy to be operated. Industrial hydraulic cone crusher technical parameter Model Cavity Size � (Coarse/Fine) Minimum Discharging Size(mm) Max Feeding Size(mm) Capacity(t/h) Weight(t) Power(kw) HP-160 c 13 150 120-240 13 160 f 6 76 55-130 HP-220 c 13 225 150-430 18 220 f 6 86 90-260 HP-315 c 13 290 190-610 26 315 f 6 100 108-320 HP-400 c 16 320 230-700 33 400 f 8 110 145-430 [production time]:� July 2018 [Location]:� South Africa [Materials]:� Sandstone [Yield]:� 250t / h [Equipment configuration]:� jaw crusher, vibrating screen, vibrating feeder, cone crusher, sand making machine If you are finding industrial grinding equipment, stone crusher machine and construction sand making equipment in China, you can choose us. Please click here for more product information.
Processing Capacity of Medium Crushing: 115-1200 (t/h) Processing Capacity of Fine Crushing: 45-750 (t/h) Luoyang Dahua supplies single cylinder cone crusher and multi cylinder cone crusher. Cone crusher is used for medium and fine crushing of hard materials, like granite, basalt, cobble. Hydraulic cone crusher has high crushing ratio, automatic iron passing function, overload protection, lower maintenance cost than impact crusher.
Hc hydraulic cone crusher is widely used for secondary and fine crushing in the fields of mining, building materials, metallurgy and so on. It can crush materials with middle and high hardness, such as ironstone, copper ore, granite, an, locking oilcan and hydraulic driving oilcan) not only protect the machinery, but also deal with troubles without disassembling the parts; 2. Easy operation, reliable performance and adjustable finished product size; 3. The crushing chamber is specially designed according to particles-layer-pressure principle. The special chamber and the suitable rotary speed improve crushing ratio and capacity as well as the cubic product percentage; 4. If something abnormal happens, such as iron is fed into the crushing chamber or there is a jam in the chamber, the machine will lift up the cover and discharge the materials automatically. This eliminates the trouble of stopping the machine to discharge the materials by workers, so the maintenance is easier, the cost is lower than spring cone crusher; 5. It is adjusted by hydraulic device and lubricated by diluted oil. The labyrinth seal eliminates the defect of mixture between water and oil in the traditional spring cone crusher; 6. The mantle and cone cave are made by high manganese steel. The special design of crushing cavity and particles-layer-pressure protection decrease the abrasion, making the service time 30%~80% longer than traditional cone crusher.
Feature and Advantage: SMH Series Hydraulic Cone Crusher possesses greater superiority than ordinary ones. 1. Larger crushing ratio, high production efficiency, high capacity and excellent product shape. Crushing ratio and production efficiency is greatly improved as the increase of rated power and capacity with the effort of the combined higher rotate speed and reasonable stroke. 2.Rational construction, advanced crushing principle and technical data, reliable operation and low cost. All components of crusher are protected by wear resistant materials, which reduces the maintenance cost and increace service life by almost 30%. 3.Lamination crushing principle, excellent product shape: A prominent increase in fine material ratio and cubic product content, and massive decrease of elongated flaky particle are achieved through selective crushing of material, which results from the replacement of single-particle crushing chamber by special inter-particle-grinding crushing cavity. 4.Shorter down time Sanme cone crusher adopts hydraulic bolt and overload protecting system, which release the impact force gently when uncrushable material is fed into the cavity and revert to original position after material discharged. The brand-new hydraulic cylinders can discharge the material when the machine stops with load. Hydraulic cone crusher has the advantages of safer, more convenient and shorter down time compared with traditional spring type cone crusher. 5.Thin oil lubricating: reliable, advanced and increases its service life. Unique oil lubricating system increases the longevity of machine. Non-contact labyrinth sealing element is of high performance, which improves the reliability of dust resisting and fundamentally eliminates the problems caused by oil water mixture appeared in spring type cone crusher. 6.Various crushing cavities meet wide range of product size requirements. By replacing the mantle and concave plate, the crushing cavity is adjustable, from standard coarse type to short-headed fine type, which meets large range of size requirements. 7.Easy maintenance and operation. All parts of SMH Hydraulic Cone Crusher can be assembled, disassembled and repaired from the top and side part, including the fixed cone and movable cone. It is no need to disassemble and install the frame, and fasten bolts, so SMH cone crusher is much more convenient and fast for replacing liner plates. The crusher production efficiency will be much better by using the hydraulic motor. 8.Padding free in mantle and concave changing. SANME hydraulic cone crusher adopts new fixing method of mantle and concave, which is padding free and less time consuming.
Based on the latest worldly advanced technology, our company designs and produces smh series hydraulic cone crusher. It is widely used in the field of metallurgy, construction, hydroelectric project, road & railway construction, chemical engineering, construction material industry and so on. It is used to crush various hard or medium hard ores and stones. The optimized design of stroke, rotate speed and crushing cavity ensures the high performance of smh cone crusher by increasing the productivity and improving product shape. Features and advantages Smh series hydraulic cone crusher possesses greater superiority than ordinary ones: 1. Larger crushing ratio, high production efficiency, productivity and excellent product shape. Crushing ratio and production efficiency is greatly improved as the increase of power rating and through capacity with the effort of higher rotate speed and stroke. 2. Rational structure, advanced crushing principle and technical data, reliable operation and low cost. All components of crusher are protected by wear resistant material, which reduces the maintenance cost and increase practical lifetime by 30%. 3. Compressive comminution, excellent product shape. A prominent increase in fine material ratio and cubic product content, and massive decrease of elongated flaky particle are achieved through Selective crushing of material, which results from the replacement of single-particle crushing chamber by special inter-particle-grinding crushing cavity. 4. Shorter down time. Sanme cone crusher adopts hydraulic bolt and overload protecting system, which release the impact force gently when uncrushable material is fed into the cavity and revert to original position after material discharged. The brand-new hydraulic cylinders can discharge the material when the machine stops with load. Hydraulic cone crusher has the advantages of safer, more convenient and shorter down time compared with traditional spring type cone Crusher.
Hydraulic Cone Crusher Application: SMH series hydraulic cone crusher adopting world advanced technology is designed and made through to be the crusher of world advanced level. it is widely used in metallurgical, architectural, water and electricity, traffic, chemical, architectural material industries. It is suitable for crushing varies of mid hard and above mid hard ores and rocks. Hydraulic Cone Crusher Feature and Advantage: (1) Reasonable structure advanced crushing principle and technical specification, reliable work and low cost. (2) Strong crushing ability; High efficient productivity; High capacity. (3) Reliable Hydraulic system providing safe and effective overload protection. (4) Two type of crushing chamber are for wide range of product size requirement. (5) High automation adopting hydraulic adjustment and hydraulic clean cavity setting.
Reasonable structure, advanced crushing principle and technical data, reliable work and low cost. Strong crushing ability, high efficiency productivity, high capacity. Types of crushing cavity are for wide range of product size requirement. Use hydraulic adjustment and hydraulic clean cavity setting, much increase automation. Smh120 , smh180, smh250 Smh120 , smh180, smh250
HPT Series High-Efficiency Hydraulic Cone Crusher combines crushing stroke with crushing chamber perfectly, which makes capacity improved and efficiency increased. Besides, hydraulic lubrication control system helps bearing of hydraulic cone crusher get double protection. Applications: Aggregate field,concrete mixing plant,dry mortar plant desulfurization,quartz sand,etc. Capacity: 120-130 tons per hour
Hydraulic Cone Crusher Multi-cylinder hydraulic cone crusher is a kind of modern crusher with high performance. On the basis of spring cone crusher, this kind of crusher obeys the laminated press crushing principle, and adopts the concept of â??more crushing, less grindingâ?? to increase the swing frequency, optimize the crushing cavity and adjust the stroke more reasonably. It is widely used in large beneficiation plant, cement plant, quarry, highway construction, water conservancy project, metallurgical plant, construction industry, etc. Crushing Features: 1.Higher rotating speed and stroke make production capacity which improved 35%-60%. 2.Better finished product shape. 3.Hydraulic protection and hydraulic cavity clearing, high automatization and less stopping production and repairing time. 4.Thin oil lubrication makes the life time increased. 5.Hydraulic motor makes the adjustment of discharging opening size and replacement of wear parts more convient.
HPT Hydraulic Cone Crusher Hydraulic cone crusher is a high-performance cone crusher that achieves lamination crushing through the optimized combination of speed, stroke and crushing chamber, greatly improving the output. Applicable materials: River pebbles, granite, basalt, iron ore, limestone, quartz stone, diabase, iron ore, gold ore, copper ore, etc. Capacity: 60-1200 tons/hour Power: 75kw-630kw Hydraulic Cone Crusher Hydraulic cone crushers effectively combine chamber design and crushing speed to increase production capacity and expand application range while ensuring reliable quality. From limestone to taconite, from metal ore crushing to artificial sand, hydraulic cone crushers provide high size reduction in quaternary, tertiary and secondary applications. Working Principle The cone crushing cone performs a swing motion under the driving action of the eccentric sleeve, driving the crushing wall to squeeze and grind the material between the rolling mortar wall. According to the lamination theory, the material is subject to forces in multiple directions, and according to its own texture After being crushed and polished, stable stone particles are formed. Those that meet the discharging requirements fall from the swing gap of the crushing wall, and the remaining materials continue to be crushed until the requirements are met.
Cone crusher features: 1. High productivity; high quality 2. Less machine stop time 3. Easy maintenance and low cost 4. Unique crushing ability in primary, secondary and tertiary crushing. Standard contianer.
D. 4. Laminated principle(between-layer pressing crushing) and matching speed adopted, improved The crushing ratio and production, at the same time, increase the content of cube in finished product. 5. Hydraulic protection and hydraulic cleaning cavity, high automation, reduce the downtime. All parts can be assembled, disassembled and repair from the top and side part, easy to operation. 6. Various crushing cavity( change bowl liner and mantle). 20gp/40gp/40hq container
Structure is new and unique, simple and reasonable, balanced operation and with low operation cost. Cone crushing machine itself is cast steel structure and the heavy load position will be thickened by using the same material. Two ends of driven shaft are equipped with conical roller bearing. Power driven is finished by overloading bevel bear and the shaft block is taken skeleton type obturating ring to prevent lubricating oil from leaking. Cone crusher has both interior copper and outside copper sheathing, one spheric seating and one ball shape copper.Wiper scraper seal is floated up by spring equipped inside spheric seating and it can worked for adjustment during the operation. Cone crusher is have hydraulic adjusting apparatus and is easy to adjust size of the disposal of cone crusher. The upper and lower parts of machine body are connected by many heavy duty hydro cylinders which are convenient for locking and cavity cleaning. Hydraulic nitrogen protection is provided. Cone crusher offer hydraulic nitrogen cylinder to release protection. Cone crusher adopt a set of outboard lubrication system which is including oil pump, gasoline tank, pipeline system .When oil temperature is too high or flowing speed of is too slow, the crusher will be automatically shut down. Negotiable
According to the lamination theory, the material is broken and polished according to its own texture, forming stable stone particles, falling from the clearance of the broken wall, and the rest materials continue to be broken until reaching To the request. When the cone crusher is working, the rotation of the motor moves around a fixed direction through the belt pulley or coupling, the transmission shaft and the cone under the force of the eccentric sleeve, so that the crushing wall of the cone crusher sometimes approaches and sometimes leaves the surface of the white rolling wall installed on the adjusting sleeve, so that the ore is continuously impacted, squeezed and bent in the crushing cavity to achieve the crushing of the ore. Broken. When the non breaking foreign matters pass through the crushing chamber or the machine is overloaded for some reason, the spring safety system can realize the safety, the ore discharge opening is increased, and the foreign matters are discharged from the crushing chamber. If the foreign matter is stuck in the ore discharge opening, the cavity cleaning system can be used to make the ore discharge continue to increase, so that the foreign matter can be removed from the crushing cavity. Under the action of the spring, the discharge port automatically resets and the machine returns to normal operation.
