Solar Water Heating System Suppliers and Manufacturers

This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller. This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system. Solar heating system 1) once heat-exchange system 2)twice heat-exchange system ( single copper coil ) 3) twice heat-exchange system ( double copper coil ) Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.

Kaltech Energy 300 Liters Solar water heating system "Thermosiphon is a method of passive heat transfer by natural convection External cover with 3layers of protection and UV resistance Perfect aesthetic result Internal protection with double enamel, heated at 860C, certified by German enamel Federation. Two magnesium anodes for absolute protection Special internal design for increased efficiency."

Solar water heating system - Heats the water up to 60-75 degrees with sun energy Weight.150 kg.

Agni Solar water heaters are a blessing, because not only do they provide instant hot water on demand, but they also reduce your electricity bills significantly. Now you can get hot water during non-sunny days too, because the insulated storage tank can be fitted with an optional heating element which will allow the system to function all-year-round. http://agnisolar.com/products/solar-water-heating-system

Type of collector: ETC Specification: 47*1800mm Number of tubes: 12, 15, 18, 24, 28 Frame Angle: 27 degree Inner tank materials: Food Grade Stainless steel Tank volume: 100L-250L Outer tank: Powder coated/Stainless steel Number of persons to use: 3-8 Benefits of solar water heaters: 1. Better Performance in winter and cloudy days 2. No scale Formation will occur by using salt &hard water 3. Compressed PUF insulated Storage tank to retain the hot water for more than 48 hrs. 4. suitable for bore well and hard water usage 5. All fasteners are made of SUS 304 food grade for rust free 6. ISI marked 1.5kw back-up heater with thermostat (optional) 7. Replacement guaranty for 5 years and free services 8. Minimum product life span of 25-30 years. 9. No electricity needed and very eco-friendly. Specification: 47*1800mm Number of tubes: 12, 15, 18, 24, 28 Frame Angle: 27 degree Inner tank materials: food grade stainless steel.

Features: + Stylish slim line design + Thermosiphon circulation minimises maintenance + Electric booster models available + Inner tank with stainless steel SUS316 + Collector absorber from Germany Bluetec company. Benefits: + Save 55% to 85% of your energy consumption for water heating + Reliable, low maintenance operation + Reduce up to 3.2 tonnes of CO2 emissions every year (300L system) + Flexible option with options of collector and tank capacity + Strong design to withstand extreme weather condition such as typhoon-frequent region + Open or closed circuit available for different climate and water quality + Easy mounting and installation + Enhanced protection for maximum life + Work life is over 15 years + Details of the Product and quality is important for us.

Features: + Stylish slim line design + Forced circulation minimises maintenance + Electric booster models available + Inner tank with stainless steel SUS316 + Collector absorber from Germany Bluetec company Benefits: + Save 55% to 85% of your energy consumption water heating + Reliable, low maintenance operation + Reduce up to 3.2 tonnes of CO2 emissions every year (300L system) + Flexible option of collector and tank capacity + Strong design to withstand the extreme weather condition such as typhoon-frequent region + Open or closed circulation available for different climate and water quality + Easy mounting and installation + Enhanced protection for maximum life + Work life is over 15 years + Details of the Product and quality is important for us.

Features Stylish slim line design Thermosiphon operation minimises maintenance Electric booster models available Inner tank with vitreous enamel Collector absorber with black chrome coating Benefits Save 55% to 85% of your energy consumption for water heating Reliable, low maintenance operation Flexible option of collector and tank capacity Strong design to withstand the extreme weather condition Open or closed circuit available for different climate and water quality Easy mounting and installation+ Enhanced protection for maximum life Worklife over 10 years Details of the Product and quality is important for us. 2000*1020*95

Features Stylish slim line design Forced circulation operation minimises maintenance Electric booster models available Inner tank with porcelain enamel Collector absorber with black chrome coating Benefits Save 55% to 85% of your energy consumption for water heating Reliable, low maintenance operation Flexible option of collector and tank capacity Strong design to withstand the extreme weather condition Open or closed circuit available for different climate and water quality Easy mounting and installation+ Enhanced protection for maximum life Worklife over 10 years Details of the Product and quality is important for us.

Features: Stylish slim line design Thermosiphon circulation minimises maintenance Electric booster models available Inner tank with stainless steel SUS304 Collector absorber with black anodized coating Unpressurized system with no coil in tank. Automatic control. Benefits: Save 55% to 85% of your energy consumption water heating Reliable, low maintenance operation Reduce up to 3.2 tonnes of CO2 emissions every year (300L system) Flexible option with options of collector and tank capacity. Strong design to withstand the extreme weather condition Open or closed circuit available for different climate and water quality. Easy mounting and installation. Enhanced protection for maximum life work life over 8 years Details of the Product and quality is important for us.

Collector:47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or slantly. Carbon size: 180*50*50cm for twenty-tube solar water heater.

Volume: 105~135L; 135~300L. Vacuum tube: 47*1500mm; 58*1800mm. Skin material: Fluorocarbon board with high quality. Inner tank material: Imported SUS304-2B food grade stainless steel. Insulating layer: polyurethane's cellular(thinkness:60-70mm). stent : Imported stainless circle steel. Specification: 15pipes\16pipes\18pipes\20pipes\24 pipes\30pipes\36pipes.

Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of color is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly. 50kg per piece

Features: 1) use the copper coil as the heat exchanger, according with international fashion trend, it is simple to install and use. 2) it takes the advantage of the tap water's pressure. More pressure , more comfortable. 3) it can produce hot water with constant temperature, it is safe and comfortable to use. 5) The water can be heated rapidly, so it can produce the high quality hot water. It can produce more hot water than the general types because it isn't. Key specification: 1) inner tank: stainless steel--0.50mm. 2) vacuum tube: Ñ)47 x 1, 500mm. 3) outer tank: painted steel-0.4mm; stainless steel sus304-0.4mm. 4) frame: coated galvanized steel-1.5mm; stainless steel sus430-1.5mm. 5) insulation: polyurethane 50mm. 6) copper coil: ¿¬12mm, thickness 0.8mm Type Area( º¦ ) Vacuum tube Volume(liters) Gross wet(kg) 20gp/40gp/40hc Loading qty(sets) ¿¬(mm) Length(mm) Qty(pcs) Lc58/1800-20c 2.97 58 1800 20 200 115 26/58/66 Lc58/1800-24c 3.57 58 1800 24 240 140 22/48/54 Lc58/1800-30c 4.46 58 1800 30 300 172 20/44/50

It is non-pressurized type solar water heater with water tank. It uses double-layer vacuum solar tube. This kind solar water heater is suitable for family in warm or hot areas. There is no water in its vacuum solar tubes, the water can be heated in its tubes, and then the hot water will be stockpiled in water tank. This non-pressurized solar water heater is very popular in asia, africa, torrid zone and warm area. 1) reliable and efficient with twin-glass solar tubes 2) easy plug-in installation 3) outer tank material: stainless steel plate or powder coated color steel sheet 4) inner tank material: 0.5mm thick sus304 food grade stainless steel plate 5) frame material: color steel 6) superior heat preservation ensured by 50 - 65mm polyurethane foam insulation layer All items are packed into cartons. For sample products, cartons are packed into plywood boxes. For containers, cartons are packed into container directly.

It is pressurized type solar water heater separated with water tank. It uses double-layer vacuum glass solar tube which has cooper heat pipe inside. This kind solar water heater is suitable both for families and projects in cold areas. It can be used in -25 celsius degrees. There is no water in its heat pipe tubes. This pressurized type solar water heater is very popular in europe and other cold areas. 1) high efficiency solar collector using heat pipe evacuated tubes 2) able to be used in all climates 3) reliable and efficient with twin-glass solar tubes 4) copper heat pipes for rapid heat transfer 5) easy plug-in installation for mounting on the roof or at ground level 6) maintenance free 7) suitable for mains pressure water (up to 8bar / 116psi) 8) corrosion resistant silver brazed copper header 9) frame material: aluminum alloy 10) casing material: aluminum alloy 11) excellent insulator in glass wool 12) collectors may be connected in series to increase water heating capacity 13) tubes easily replaced if broken - can be used with broken tubes 14) ideal for commercial solar water heating applications Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.

It is a non-pressurized type solar water heater separated with water tank.. It uses double-layer glass evacuated solar tubes. It is high heat efficiency and economical system especially for projection. It is designed for commercial solar water heating application. This type soalr water heater is very popular in some hot or warm areas. 1). Designed for commercial solar water heating applications 2). Reliable, efficient, twin-glass solar tubes 3). Polyurethane insulation ensures good heating performance and minimal heat loss 4). Manifold cover's material: stainless steel or galvanized sheet 5). Frame material: 1.2mm thick all stainless steel 6). Easy plug-in installation 7). Can be connected in series to increase water heating capacity Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.

This is a pressurized type tubular solar water heater (sfd type ) with copper coil. Sfd model has a special copper coil heat exchanger in the inner tank. The coil copper pipe can bear 8 bars pressure. The water in the tank is used as the heat transfer medium, rather than using it directly. The obvious advantages are with water supplier, which can supply cold water into the tank automatically; it can be connected with pressurized system. Sfd is suitable for torrid zone and warm areas. 1). Designed to accept mains pressure cold water 2). Copper coil heat exchanger can be used as part of a closed or open loop system, providing heating to a main hot water tank 3). Freezing is of minimal concern for sfd series 4). Reliable, efficient, twin-glass solar tubes 5). Superior heat preservation with 50 - 65mm polyurethane tank insulation 6). Outer tank material: stainless steel plate or powder coated color steel sheet 7). Inner tank material: A) 0.5mm thick sus304 food grade stainless steel plate B) high purity copper for the heat exchanger coil 8). Frame material: 1.2mm thick all stainless steel 9). Collectors may be connected in series to increase water heating capacity 10). Easy plug-in installation Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.