Find Verified Sintered Stainless Steel Mesh Filter Suppliers, Manufacturers and Wholesalers

Sintered stainless steel mesh filter is a new type of filter material made of multi-layer metal woven wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal The filtration structure has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance, cold resistance and processability, especially ideal for filtration that requires high compressive strength and uniform filtration precision. Parameters: Material: 316L stainless steel Filtration accuracy: 0.22-100um Size: standard or customized Application: (1) Used as dispersion cooling material in extremely high temperature environment; (2) Orifice plate material for gas release liquid fluidized bed; (3) Used for high-precision, high-reliability high-temperature filter materials; (4) Used for high pressure backwash oil filter. Examples: (1) Precision filtration of various hydraulic oils and lubricating oils in the machinery industry; (2) Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry; (3) Application of gas homogenization in powder industry, fluidized plate in steel industry; (4) Buzzer, etc. in explosion-proof electrical appliances; (5) Gas-solid, liquid-solid, gas-liquid separation. Performance advantages: 1. High strength and rigidity: high mechanical strength and compressive strength; 2. High precision, uniform and stable: uniform filtering performance can be achieved for the filtering particle size with a precision of 1~300 m, and the mesh does not change during use; 3. Wide range of use environments: It can be used for filtration in temperature environments ranging from -200 C to 650 C and acid-base corrosive environments; 4. Excellent cleaning performance: good countercurrent cleaning effect, can be used repeatedly, and long life (can be cleaned by countercurrent water, filtrate, ultrasonic waves, dissolution, baking, etc.).

Sintered mesh filters are resistant to high temperatures and corrosion, so they are usually used for purification and filtration of liquids and gases, separation and recovery of solid particles, transpiration cooling at extreme high temperatures, and airflow control distribution. Filter cartridges are made of stainless steel 304/316L. Sintered mesh cartridges are available in the operating range from -150C to +300C with differential pressures up to 25 bar. Material:stainless steel304/316L Technique:wire mesh Thickness: is determined by the number of layers of sintered wire mesh, five layers of standard sintered wire mesh thickness is generally 1.7mm. Size: According to the size of the sintering furnace chamber, the common specifications are 500mmX1000mm, 1000mmX1200mm. High strength: high strength even after high temperature sintering, up to 600C Durable and corrosion-resistant: maintains a stable structure at high temperatures and pressures or in highly acidic environments. High filtration accuracy, customizable: filtration accuracy from 1 micron to 8000 microns Widely used: widely used for uniform filtration in high-pressure or high-viscosity environments, such as petroleum, chemical and food grade filtration. Why use wire mesh filter? Stainless steel sintered wire mesh filter is a new type of filtration material which is made of multi-layer metal wire mesh through special laminated pressing and vacuum sintering process, with high mechanical strength and overall steel. The pores of each layer of wire mesh are interlaced to form a uniform and ideal filtration structure, which not only overcomes the shortcomings of ordinary metal wire mesh with low strength, poor rigidity and unstable mesh shape, but also can reasonably match and design the material's pore size, penetration performance and strength characteristics, so as to make it have excellent filtration precision, filtration impedance, mechanical strength, abrasion resistance, heat resistance, and the comprehensive performance is significantly better than that of sintered metal powder and sintered metal powder, and the overall steel. The comprehensive performance is significantly better than other types of filter materials such as sintered metal powder, ceramics, fiber, filter cloth, filter paper and so on. What's the structure of the wire mesh filter Metal sintered filter is a widely used standard structure of sintered wire mesh, generally five-layer structure, divided into five parts: protective layer, filtration and control layer, dispersing layer, supporting skeleton layer, and skeleton layer.

Sintered Metal Mesh is a wire filtering cloth made by pressing multi-layer stainless steel woven wire cloth, then sintered together in a vacuum furnace. This kind of filtering cloth is much better than common metal woven wire mesh with good strength,hardness and good positioning of opening. Its comprehensive property is superior to sintered metal powder and porcelain.

Product Introduction 40 Micron Stainless Steel Sintered Wire Mesh Filter Element is a type of filter that is made by sintering multiple layers of stainless steel wire mesh together. Sintering is a process that involves compacting and heating a material without melting it, which causes the particles to fuse together and form a solid mass. 40 Micron Stainless Steel Sintered Wire Mesh Filter Element consists of multiple layers of wire mesh that are stacked and then sintered together. The sintering process creates a solid bond between the wires, resulting in a robust and durable filter element that can withstand high temperatures, pressures, and corrosive environments. Parameter Material: stainless steel Grade:SS 316L, SS 304L, SS 316, SS 304 OD: Max. 200mm Length: Max. 1500mm Accuracy / Pore Size: 0.2um-200um Porosity: 30%-60% Temperature resistance: â?¤300â?? Technique: Sintering Process Surface: Smooth, clean and metallic Feature 40 Micron Stainless Steel Sintered Wire Mesh Filter Element has several advantages over other types of filters. First, it has a uniform and controlled pore size, which ensures consistent filtration performance. Second, it has a high dirt-holding capacity, which means that it can capture a large amount of contaminants before needing to be cleaned or replaced. Third, it has excellent mechanical strength, allowing it to withstand high pressures and mechanical stresses. Fourthly, it can be cleaned and reused, making them a cost-effective and environmentally friendly filtration solution.

Product Introduction Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life. The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive. Parameter Material: stainless steel 304, 304L, 316, 316L Length: 10-1500mm Diameter: 10-80mm Wall thickness: 10-50mm Filtration accuracy: 0.2-300um Layers: Single, 2 to 3, 5-layer & 6-layer or customized Porosity: 35%-80% Service temperature: -200 C to 1000 C Features: 1.) Better mechanical properties; 2.) Good stable pore size; 3.) Easy cleaning, reusable and durable; 4.) Stable pore shapes for perfect permeability; 5.) Reliable quality, big particles filtration; 6.) Attractive surface; 7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling; Application 1.) Oil & Gas production 2.) Water treatment; 3.) Food and beverage; 4.) Pharmacy; 5.) Chemical industry; 6.) Polymer filtration; 7.) Refine; 8.) Energy & nuclear.

1.1-100 microns 2.Stainless steel,Copper, brass,titanium 3.OEM,Non-standard 4.Mesh sintered Material: stainless steel,brass,bronze Category: stainless steel powder sintering, stainless steel nets sintering, bronze powder sintering, mesh sintering Filtration precision: 2-150 micron Structure: flake, Cartridge, tube, tubular shape, the goblet, bowl, plate, tapered, T shape, Cap shape, cylindrical clavite, Housing Anping County Longyi Mesh Manufacture Co.,Ltd produing sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to -100�°C in oxidizing and 600�°C in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available. Want more information or would like to receive a quote?

Product Description Sintered Stainless Steel Wire Mesh Industrial Filter Tube Material: stainless steel wire(SS304 316 316L 314 317 321 430 310S etc.) Sintered Stainless Steel Wire Mesh Industrial Filter Tube is made of single layer or multi-layer metal mesh. The mesh count are decided by different conditions of use and purpose. It is can be widely used in petroleum chemical industry, oil field pipeline filter, fuel refueling equipment filter, water treatment equipment filter, pharmaceutical and food processing field etc. Sintered Stainless Steel Wire Mesh Industrial Filter Tube available sizes: Aperture:20-500micron. Tube long:1''-22'' Tube diameter:1''-3.93'' Welded pattern:spot welding,argon-arc welding. Detailed Images Sintered Stainless Steel Wire Mesh Industrial Filter Tube pictures: Packing & Delivery Payment 100% T/T in advance if order amount less than USD 10000.00, 30%paid in advance and 70% paid before shipment if order amount more than USD 10000.00. L/C payment is workable. Any other payment term can be negotiate

The multi-layer sintered stainless steel wire mesh filter tube is a type of filter component. It is formed by multiple layers of fine stainless steel wire mesh and the gaps between the layers are bonded through a special high-temperature sintering process, creating a tubular structure. This type of filter tube typically employs high-quality stainlessThe manufacturing process of this type of filter tube involves several steps: Selection of high-quality stainless steel wire materials, such as 316L stainless steel wire, typically arranged in multiple layers. Selection of high-quality stainless steel wire materials. This causes the layers of wire mesh to sinter and fuse together, creating an integral filtering structure. Filter tubes form a fixed grid structure. With precise pore sizes and a certain level of filtration accuracy, effectively filtering out tiny particles and impurities in liquids or gases. Finally, the tube is cut or customized into different sizes and shapes to meet specific filtration requirements. The main features Effective Filtration: To ensure sterility and hygiene, pharmaceutical factories routinely perform thorough cleaning and disinfection of pharmaceutical tools and filtration equipment. Sintered stainless steel powder filters facilitate this process as steel, unlike other metals, has fewer pores that easily trap impurities. Micron-Level Pores: The mesh filter core can remove particles as small as 0.2 microns and can be customized for your specific equipment. Stainless steel's malleability and stable performance are robust. Choosing the appropriate stainless steel sanitary filter depends on its application within the processing unit. Easy Cleaning and Disinfection: The popularity of sintered stainless steel filters in the pharmaceutical industry stems from their ease of cleaning and disinfection. Maintaining equipment cleanliness ensures prolonged equipment lifespan while minimizing contamination risks. High and Low-Temperature Resistance: Stainless steel alloys are known for their excellent performance at both high and low temperatures. At high temperatures, stainless steel demonstrates outstanding compressive strength, making it suitable for high-temperature filtration needs. Conversely, at lower temperatures, stainless steel's tensile strength actually increases more than at room temperature, making it ideal for refrigeration and low-temperature filtration equipment.