Vacuum casting technology offers a wide variety of materials to facilitate the creation of cast urethane parts, typically for functional test, pre-production evaluation and low volume production. Cast auto urethane parts are quick and inexpensive without the need to invest any metal tooling when quantities are only dozens of short runs, and can be delivered within weeks in most instances. Standard lead time Up to 10 copies within 15 working days Standard accuracy ±0.3% (with lower limit on ±0.3 mm on dimensions smaller than 100 mm) Minimum wall thickness To ensure that the mold is filled properly, a wall thickness of at least 0.75 mm is necessary. For best results, we recommend a wall thickness of at least 1.5 mm Maximum part dimensions The size of the mold is limited by the dimensions of the vacuum chamber (1900 x 900 x 750 mm) and by the volume of the product (maximum volume: 10 liters) Typical quantities Up to 25 copies per mold (depending on the mold's complexity and the casting materials) Surface structure High-quality surface finish comparable to injection molding. Advantages of Silicone Auto parts Vacuum Casting : Great for low volumes Self-coloured parts Low upfront investment Production like parts Massive range of materials Rubber like parts and over molds
The original model for vacuum casting is generally created using the stereolithography method. From this model, a primary mold of silicone is created and filled in the vacuum chamber with liquid polyurethane casting resin (PUR). The vacuum prevents bubbles and shrink holes even in complex molded parts. After hardening, the service of the casting is finished. Given the numerous available polyurethanes and ureols (PU hard foam), many conventional production plastics (injection molding) can be simulated. Whether rubber-soft, last, semi-rigid or ABS rigid, there are vacuum casting resins for a very wide range of material requirements and priorities. Two component parts (hard/soft) or inserts are also possible. The dimensional precision of molded parts in vacuum casting is �± 0.1 mm or 0.2%. In vacuum casting, the maximum yield from one silicone mold is approximately 20 molded parts. There are no demolding chamfers and added material to compensate for shrinkage in vacuum casting.
Since 36 Years, we JAY KHODIYAR INDUSTRIES are recognized as a trustworthy manufacturer, Exporter and supplier of cast iron product. In order to manufacture high-quality cast iron our professionals employ advanced machines and utilize quality tested material procured from the authentic vendors. In addition, our clients can avail these cast iron from us at a reasonable price.
Rickshaw with Solar Panel.. Battery 60V 32 AH Available in 5 Colours -Yellow -Parrot Green -Pink -Red -Sky Blue
Auto Parts
Auto Parts
Auto Parts
Auto Parts
Auto Parts
Auto Parts
We are producing only Aluminum Gravity Die Casting for 30 year in Korea We have a lot of experience about Gravity die Casting Please make anytime with drawing
Aluminum Parts
Automotive Gear Parts suitable for Tata (Commercial and Car), Leyland, Force Motors, Maruti
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Brass Auto Parts
Backed by a team of dedicated and skilled professionals, we are able to provide a vast collection ofBrass Auto Parts as per client requirement. The offered range of screws is manufactured by our professionals in adherence with the industry laid standards & norms. These Brass auto parts are offered by us at very reasonable rates.These are available in many dimensions like sizes and shapes and are available in full customization.
Chemicals, minerals, agro products, steel, aluminium, copper, scaffolding products, minerals, scrap, washing machine parts, refrigerator parts, micro oven parts & auto parts..
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
