Product Description : Chemical Name : gamma-methacryloxypropyltrimethoxysilane CAS NO. : 2530-85-0 Against other brands Silquest A-174 Dow Corning : Z-6030/OFS-6030 ShinEtsu: KBM-503 Degussa : Dynasylan MTMO Wacker : GENIOSIL GF 31. Specifications: Appearance : transparent liquid Colour(Pt-Co) : 30 Specific Gravity20C, g/cm3: 1.043 1.053 Refractive Index : 1.4285 1.4310 Purity% :at least 97.0. Applications: Its utility in the manufacturing of many intermediate product such as: unsaturated polyester, ethylene-propylene copolymer, polystyrene, ABS, polyurethane, polybutadiene and polyethylene crosslinked by peroxide. Modified by silane coupling agent can not only be used as filling of artificial marble to reinforce the bending strength of board but also greatly reduce the production cost of artificial marble.Glass Fiber Soakage Agent Glass fiber soakage agent is used in the treatment of glass fiber. It contains filmerformer, lubricant, anlistatig, silane coupling agent and water etc. The concentration of the silane coupling agent should be of 0.3%-0.6%. Electrical wire and cableWhen used in electrical wire and cable, USi-3301 can greatly improve its mechanical property and electrical property . When applied in argil, USi-3301 has dramatically better the consumption factor, inductance and capacitive reactance of the EPM (ethylene propylene monomer) and EPDM (Ethylene-Propylene-Diene Monomer) systems crossed linked by peroxide and filled with argil. USi-3301 results 2.5 times better than vinyl silane with the same dosage. Filler Treatment This silane can improve the mechanical strength of polyester composite materials made from filling white carbon black glass, silicate and metal oxide in either dry or wet state, for instance, crosslinked polyethylene and polyvinyl chloride.Adhesive and sealant USi-3301 can be applied in acrylic resin and polyester adhesive improving its water resistance and adhesion stress with inorganic material, and also lowering its solidification value. 25 kg, 200kg plastic or iron drum.
ProName: Acetone oxime ,Acetoxime CasNo: 127-06-0 Molecular Formula: C3H7NO Appearance: White crystal ProductionCapacity: 1-100 Metric Ton/Month Grade: Industrial Grade Specifications: index value appearance white crystalline powder or flakes Assay 99.0% residue on ignition 0.01% Boiling point 135 c at 1,013 hpa Moisture 0.25% Uses: It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine. Package: 25kg carton drum or 1kg foil bag or by request of clients Storage: Store in dry, dark and ventilated place Transportation: by sea or by air
Product Description: Chemical Name: N-(A-aminoethyl)-A-aminopropyltrimethoxysilane Alias:[3-(2-Aminoethyl)aminopropyl]trimethoxysilane: DAMO CAS NO. : 1760-24-3 Against other brands: EINECS No:217-164-6 Silquest A-1120 Dow Corning: Z-6020/OFS-6020 ShinEtsu: KBM-603 Wacker: GENIOSILGF 9/91 Specifications Appearance : Colorless transparent liquid Colour(Pt-Co) : 25 Specific Gravity20C, g/cm3 :1.010-1.030 Refractive Index :1.4425C1.4460 Purity% : 97.0 Applications: USi-D1301 may be used as an additive, meeting the need of special primers in numerous bonding applications. USi-D1301 can display a good adhesion in the following system£º RTV Silicones and Hybrid Silane-Cross-linked Sealants USi-D1301 silane coupling agent with single-double component silane-cross-linked sealant can improve the adhesion of many substrates, including glass, steel, aluminum and concrete. This silane can dramatically enhance the adhesion to a wide array of plastics when used in combination with SPURSM Technology for silyl urethane polymers. Polysulfide Sealants: When silane USi-D1301 is added to single-double component polysulfide sealants, it provides better adhesion to a variety of substrates, including glass, aluminum and steel. Use dosage of Silane USi-D1301 is 0.5 to 1.0 percent of the sealant you use in general. It disperses well and can obtain cohesive split rather than interfacial split between the sealant and the substrate. Furthermore, the use of silane USi-D1301 can avoid using primers and it can enhance the adhesion strength between the coatings. Plastic sealant: In plastic sealants treatment, silane USi-D1301 (0.5 to 1.5 weight percent) as an adhesion promoter, a replacement for polyaminoamide, can improve bonding to metal substrates. In addition to increasing strength, the silane-modified plastic sealants have a better performance than systems those use polyaminoamide adhesion promoter. Silane USi-D1301 modified plastic systems have a very light color and the cured compound is bubble-free. Additive in Phenolic and Epoxy Molding Compounds: Silane USi-D1301, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. So it can improve wet electrical properties, particularly at low frequencies. High-temperature strength properties are also improved. 25 kg, 200kg plastic or iron drum.
Product Description: Chemical Name: 3-Glycidoxypropyltrimethoxysilane CAS NO. : 2530-83-8 Against other brands: Einecs#:219-784-2 Silquest A-187* Dow Corning:Z-6040/OFS-6040 ShinEtsu: KBM-403 Degussa: Dynasylan Glymo Wacker: Geniosil GF 80. Specifications: Appearance : Colorless transparent liquid Color (Pt-Co): 25 Specific Gravity20C, g/cm3 1.060 1.075 Refractive Index : 1.4275 1.4300 Purity% : at least 97.0 Applications: 1. As epoxy coupling agent, it is used in polysulfide-based and metal-filled epoxide resinous material. 2. Improve the adhesion between inorganic stuffing, substrate material and resin, accordingly improve electrical property of electronic material which is made of epoxy resin and wrappage. 3. It can be widely used in multi-fillers and substrates such as clay, talcum, tricalcium silicate, silica, quartz, aluminum, copper and iron. Including quartz-filled epoxy sealants, grail-filled epoxy resin and concrete patching material or coating, toner of modeling kits, and improving the dispersivity, fluidity of adhesive. 4. To avoid the need of independent primer in polysulfide and polyurethane sealant and sealing compounds. 5. Improve the adhesion of double-component epoxy sealing agent, It is used in polyurethane adhesive and sealant, epoxy resin adhesives, enhanced thermosetting resin, glass fiber adhesive, thermoplastic resin for inorganic filler or glass reinforcement. 25 kg, 200kg plastic or iron drum.
Product Description: Chemical Name : gamma-aminopropyltriethoxysilane CAS NO. : 919-30-2 Against other brands: Einecs No:213-048-4 Silquest A-1100* Dow Corning: Z-6011 ShinEtsu: KBE-903 Degussa: Dynasylan AMEO Wacker: Geniosil GF 93. Specifications: Appearance : Colorless transparent liquid Colour (Pt-Co) : 25 Specific Gravity20C, g/cm: 3 0.940 0.950 Refractive Index : 1.4180 1.4220 Purity% : at least 97.0. Applications: Coatings, Adhesives and Sealants: The aminosilane is an excellent adhesion promoter in acrylic coatings, adhesives and sealants. With polysulfide, urethane, RTV silicones, epoxy, nitrile, phenol formaldehyde resin, adhesives and sealants, the product improves pigment dispersion and maximizes adhesion to glass, aluminum and steel. Fiber glass Reinforcement: In fiberglass reinforced thermosetting plastics and thermoplastics, the aminosilane enhances the flexural, tensile and interlaminar shearing strengths before and after exposure to humidity. This product greatly improves wet electrical properties. Fiberglass reinforced thermoplastics, polyamides, polyesters and polycarbonates exhibit increased flexural and tensile strengths before and after wet exposure when this silane is used. Glass Fiber and Mineral Wool Insulation: As a phenolic resin binder additive, the aminosilane imparts moisture resistance and allows recovery after compression Mineral Filler and Resin Systems: The aminosilane maximizes the physical and electrical properties of mineral-filled phenolics, polyester resin, epoxies, polyamides, polycarbonate and a host of other thermoset and thermoplastic composites. Wettability and dispersibility of filler in the polymer matrix are also improved. Foundry Application: In shell molding, the aminosilane strengthens the bond between the phenolic binder and foundry sand. Grinding Wheel Manufacture: The aminosilane promotes an improved, water resistant bond between the abrasive grit and phenolic resin binder. Wood plastic composite production: The mechanical properties of composites made of wood meal, such as impact strength, bending strength and bending modulus, will be improved after these composites are processed with this product. 25 kg, 200kg plastic or iron drum.
Product Description : Chemical Name: Vinyltrimethoxysilane Alias : (Trimethoxysilyl)ethylene : Trimethoxy(vinyl)silane; : VTMO CAS NO. : 2768-02-7 Against other brands: Silquest A-171* Dow Corning: Z-6300/OFS-6300 ShinEtsu: KBM-1003 Wacker: GENIOSILXL 10 Specifications: Appearance : Colorless transparent liquid Color(Pt-Co) : 25 Specific Gravity : 20C, g/cm3 0.965-0.975 Refractive Index : 1.3925C1.3935 Purity% : 98.0 Applications: 1. It can be applied to cross-linked polyethylene wire, cable insulation and sheath materials. It is an important cross linking agent for cross-linked polyethylene. Its cross-linking technology only need simple equipment and few investment. Moreover, it can be easily controlled when compared with common peroxide cross-linking and radiation cross-linking. Due to excellent electrical properties, heat resistance and stress cracking resistance of the silane cross linked polyethylene, it can be widely applied to wire, cable insulation and sheath materials. 2. It can be used in modified high polymer for special purpose. It can copolymerize with many monomers such as ethylene, propylene and butylene or graft polymerize with related resin, and then be made into modified high polymer for special purpose. 3. It can be applied to cross-linked polyethylene heat-proof tube, pipe and film. It is an important cross linking agent for cross-linked polyethylene, which possesses the characteristics of excellent aromatic hydrocarbon resistance, oil resistance, stress cracking resistance, high mechanical strength and thermal performance. It can be used for 50 years at the temperature of 80. It can be widely used in external anti-corrosive and thermal insulated coatings of oil long-distance pipeline, natural gas and coal gas pipe line and related pipe of corrosion protection materials. It can also be used in cross-linking agent of ethylene vinyl acetate, chlorinated polyethylene, and ethylene ethyl-acrylate copolymer. 4.This product can be applied to dipping process fiberglass and inorganic fillers which contain silicone. It improves the soakage and cement-ability between resin and fiberglass in order to effectively improve the mechanical strength and electrical properties of glass fiber reinforced plastics and laminated plastic products, especially wet mechanical strength and electrical properties. Significantly, it improves the weather resistance, water resistance and heat resistance of glass fiber reinforced plastics and extends service life of its products. Besides that, it also gives glass fiber reinforced plastic products better electromagnetic wave transmission. 5. It can be applied to manufacturing special coatings. It can be co-polymerized with oleic series of monomers and made into special external coating, which owns the properties of weather resistance, dust resistance and wipe-able ability and can be used for 20 years. 6. It can be used in composite material adhesive accelerator. This product is an excellent accelerator to silicone rubber, metal and textile, etc. 25 kg, 200kg plastic or iron drum.
Carbomer 1.Carbomer (carbomer) is a high molecular weight polymer of acrylic acid bonded with pentaerythritol allyl ether or allyl sucrose. Calculated according to the dry product, the carboxylic acid group (-COOH) should be 56Chemicalbook.0%ï½?68.0%. Carbomer is a very important rheology modifier. The glue combined with water is acidic. The neutralized carbomer is an excellent gel matrix, which is important for thickening and suspension. 2.Carbomer (Carbomer) is a pentaerythritol and other resin that is linked with deformation. It is a very important and fantastic rheological modulated chemistry book section. The neutralized carbomer is an excellent spring limit. , There are important processes such as thickening and suspension, simple, good stability, and a wide range of deep, cream, and medium processes Specification Product Name: Carbomer 940 Appearance White Powder Specification 99% CAS 9007-20-9 Package 1kg/aluminum foil bag; 25kg/drum Sample Availiable Storage Dry Place Shelf life 2 Years Application: Carbomer is used for topical formulations and suitable for preparation of gels, creams and coupling agent. Carbomer and cross-linked acrylic resin as well as series products of these cross-linked polyacrylic acid are widely used at present and are often used in topical lotion, cream and gel. In a neutral environment, Carbomer system is an excellent gel matrix with crystal appearance and nice sense of touch, so Carbomer is suitable for preparation of cream or gel..
Product Name: ISONONYL ISONONANOATE Appearance: Colorless transparent liquid Purity: 99% CAS Number: 42131-25-9 Supplier: ZhenYiBio It is an excellent emollient ester with good ester effect, it softens the skin, keeps it moisturised and protects dry skin. It has excellent compatibility with silicone oil. Miscible with dimethicone.It can solve the problem of low temperature precipitation of silicone oil. It is a stabilizer and coupling agent for silicone oil. It has good dispersing ability for pigments. It is commonly known as synthetic silk oil. It has extremely high solubility for silicone oil (colloidal silicone oil is also soluble), very stable in silicone oil-containing formulations, and shows moisturizing without greasy feeling. Used in skin care products, foundation cream, oily powder, etc. Proposed dosage: sunscreen foundation, makeup, skin care, makeup remover oil: 1-5%
Precipitated Calcium Carbonate (PCC) is synthetic calcium carbonate. It is white ultra-fine crystalline powder having consistent Particle Size Distribution and Excellent dispersibility. Precipitated Calcium Carbonate (PCC): High Purity lime stone is calcined in Lime Kiln to produce quick lime which is slaked and further carbonated to produce PCC slurry, which is filtered and dried to produce pure white PCC Powder. Activated Calcium Carbonate (ACC): Activated Calcium Carbonate is produced by surface coating the Precipitated Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titanate Coupling Agent. Filtering and drying of the coated PCC slurry to produce ACC Powder. The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants and time. Price: INR 5,000/- to 20,000/-
Silane coupling agent.
Linear Alkylbenzene Sulfonic Acid(LABSA . LAS)96% Linear Alkyl Benzene Sulphonic Acid (LABSA) 96% is the largest-volume synthetic surfactant that is widely used in the formulation of Domestic Detergent Powder, Cake & Dish wash cleaners. It constitutes the formulation of industrial cleaners and also acts as emulsifier and coupling agent. Full name: Linear Alkyl Benzene Sulphonic Acid Other name: LABSA, DBSA ;Dodecyl Benzene Sulphonic Acid;Dodecyl Benzene Sulfonic Acid ; Linear Alkyl Benzene Sulfonic Acid ; DDBSA CAS: 27176-87-0 EINECS No.: 248-289-4 Molecular Formula: R-C6H4-SO3H Molecular Weight:323 HS Code: 34021100.00
Coupling agents are used in the rubber industry to improve the wear resistance and aging resistance of tires, rubber sheets, rubber hoses, rubber shoes and other products, and can reduce the amount of NR, thereby reducing costs. ELD-YG69 can be used to used in rubber industry to improve modulus and tensile strength of rubber, to reduce the compound viscosity and save process energy consumption. It is especially applicable for polymers with double bond or rubber formulation with hydroxyl fillers. The suitable fillers include silica, silicate, clay, etc. The suitable rubber include natural rubber (NR), Butadiene styrene rubber (SBR), Isoprene rubber (IR), Butadiene rubber (BR), Acryloni-trile butadiene rubber (NBR), Ethylene propylene diene rubber (EPDM), etc.
Silane coupling agent Silane coupling agent Si-69 chemistry is named double [gamma - (triethoxy silyl) propyl] four sulfide.It is often used to treat inorganic fillers such as carbon black and SiO 2. It not only has the function of activator and coupling agent, but also has the function of crosslinking agent, softener and reinforcing agent. It is used as reinforcing agent and vulcanizing agent in rubber industry.
Silane Coupling Agents.
PE modified maleic anhydride used as coupling agent for PE filled with natural fiber, like glass fiber, talc, starch, calcium carbonate, etc.
Silicone Coupling Agents, Silicone Crosslinking Agents, Silicone Oil, Customized Silanes.
It has unique polymethyl branch chain structure, silky feeling, dry and extremely soft hand feel, excellent emollient. The compatibility of silicone oil is good, can solve the problem of low temperature precipitation of silicone oil, and is a stabilizer and coupling agent of silicone oil. The color has a good dispersion ability, low viscosity, skin feeling fresh, no greasy feeling. Commonly known as synthetic silk oil.
Glycol ether DB is a colorless liquid solvent known for its water solubility and slow evaporation. Glycol ether DB has primary uses in cleaning products and coatings. Glycol Ether DB is an outstanding solvent and coupling agent that acts by itself or in combination with surfactants to lower the surface tension of cleaning solutions in household and industrial cleaners. It has an alcohol component to dissolve water-soluble soils and an ether part to dissolve oil-soluble soils. It is used as a diluent and solvent in resins, polymers, paints, coatings, silk screen printing inks, pen inks, textile dyeing, printing, oils, nitrocellulose, gums, dyes, and soaps. It is used as a coalescing agent in latex paints and as a coupling agent in disinfectants, hard surface cleaners, rust removers, and water-based printing inks. It's also used as a metal cleaner and as a dye solvent in the textile industry. Specifications Appearance: Conforms Color pt co: 10 Max Butyl Carbitol Solvent wt%: 99.0 Min Acidity wt%: 0.010 Max Water wt%: 0.10 Max Specific Gravity at 20/20 C: 0.9515 -0.9555 Packing 441 lb drum, 4 drums per pallet 2116.42 lb tote
Bis(2-hydroxypropyl) Ether is commonly used as a plasticizer, an intermediate in industrial chemical reactions. Properties: Dipropylene glycol is a kind of high purity product, suitable for flavor, cosmetics and other applications sensitive to odor. It is an odorless, colorless, water-soluble and hygroscopic liquid. Dipropylene glycol has a low vapor pressure and a moderate viscosity. Application Used in the manufacture of polyester resin. It is used as the solvent of cellulose acetate, cellulose nitrate, shellac varnish, castor oil, the component of fiber lubricant, and the preparation of plasticizer, fumigant, synthetic detergent, etc. In addition, dipropylene glycol can be used alone or in combination with diethylene glycol to extract aromatic hydrocarbons from hydrocarbons. (1) Chemical synthesis: Dipropylene glycol is often used to synthesize other chemicals, such as polyethers, polyesters, etc. (2) Solvent: Since dipropylene glycol has good water solubility, it can be used as a solvent to dissolve or dilute other substances. (3) Spices and condiments: Dipropylene glycol can be used as a food additive to increase the taste and flavor of food. (4) Cosmetics: Dipropylene glycol can be used as a moisturizer in cosmetics to improve the moisturizing effect of cosmetics. (5) Pharmaceuticals: Dipropylene glycol can be used in the pharmaceutical field as a carrier or auxiliary for drugs. Usage 1) Dipropylene glycol is the most ideal solvent for many fragrance and cosmetic applications. This raw material has good water, oil and hydrocarbon co-solubility and mild odor, little skin irritation, low toxicity, uniform distribution of isomers, excellent quality. 2) Dipropylene glycol can also be used as a coupling agent and moisturizer in a variety of different beauty cosmetic applications. In the field of perfume, the proportion of dipropylene glycol is more than 50%; In some other applications, the proportion of dipropylene glycol is generally less than 10% (by weight). Some of the specific product application areas include: curling lotions, skin cleans (cold creams, body washes, body washes, and skin lotions) deodorants, face, hand, and body skin care products, moisturizing skin care products, and lip balms, among others. 3) Dipropylene glycol can also play a role in unsaturated resins and saturated resins. It produces resins with superior softness. Crack resistance and weather resistance. The long-term yellowing resistance of the product is the value.
Buy fresh Bitter kola | Kola nuts Shop for Bitter Kola online on Basic Agro Tech Nig. Ltd. - Best prices in Nigeria - Enjoy Great delivery service. This seed commonly known as bitter kola or male kola, is used in traditional African medicine for the treatment of various infectious diseases, such as hepatitis, infections due to the influenza virus and other viral diseases. Bitter kola is an edible seed, which belongs to a unique group of plants that help organisms to adapt to stress by influencing multiple regulatory systems responsible for stimulus response coupling such as the immune system and act also as a general anti-infective agent. BUY NOW 1kg 3kg Description BITTER KOLA Botanical Name: Garcinia Kola Common Name: Orogbo, Bitter kola Commonly Found Region: Benin, Democratic Republic of the Congo, Ivory Coast, Mali, Gabon, Ghana, Liberia, Nigeria, Senegal, Sierra Leone. NUTRITION PROFILE Compound Per/100g Macronutrients Carbohydrates Water Fiber Protein 70-31% 9.28 3.94 11.27 Vitamins & Minerals Vitamin A, C, E, B1, B2, B3, Calcium, Potassium, Iron Phytochemical Tanin Sapoium Phytic acid Phenol Sterol Oxalate HEALTH BENEFIT * Used for treating throat infection * In treating diarrhea * Used in treating bronchitis * It is used as a phrodisiac * Used as anti-parasitic and antimicrobial agent.
