Mainly used in tire, rubber product Rubber adhesive ra 65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: white powder Ash content (850 degree), %: 29-35 Moisture content (boiling evaporation method) & 4.5 Sieve residue (325 mesh wet-method), % & 0.3 Free formaldehyde, % & 0.1 25kg/bag
Application description:Rubber adhesive RA produces adhesion through reaction with methylene acceptor. For example, it reacts with rubber binder RE and resorcinol formaldehyde resin GLR-20 to form thermosetting resin. The reaction will occur very quickly at vulcanization temperature. If the reaction occurs before vulcanization, the adhesion of the coordination system will be greatly reduced or even lost. Usually, the rubber, filler and methylene acceptor are prepared at high temperature, and then the rubber adhesive RA is added with accelerator and sulfur in the final refining stage. The recommended proportion is 2-5 rubber adhesive RA for each 100 rubber, and 2-5 GLR-20 resins. Packaging storage and transportation: 1. The rubber adhesive RA is wrapped in woven bags and lined with polyethylene plastic bags. The net weight is 25Kg per package. 2. Before transport and storage, check whether the product packaging is intact. During storage and transportation, the products should be stored in dry, clean and cool warehouses in order to prevent dampness and heat deterioration. 3. The effective storage period is one year. For information about other types of rubber adhesive,please send message to Email.
Rubber Adhesive HMMM / Rubber Adhesive GLR-801 / Rubber Adhesive CYREZ 963 Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 3089-11-0 Technical Specifications: Appearance: Colorless transparent liquid. Density: 1.20 Formaldehyde content % min.: 40 Free formaldehyde content % max.: 0.5 Viscosity: 2000~5000 Heating loss % max.: 1.0 Application: 1. It can promote adhesive force to rubber and steel cord or fabric cord. 2. Suggested ratio: 1.5-3 poses rubber adhesive HMMM, 2-5 poses resorcinol formaldehyde resin or other methylene acceptor. Packaging and storage: 1. In standard IBC drum lined with plastic film, net weight: 1.1MT/drum. 2. Shelf life is one year.
Rubber Adhesive RA-65 / Rubber Adhesive HMMM-65% / Rubber Adhesive GLR-806 / Rubber Adhesive CYREZ 964 / Rubber Adhesive HMMM Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 65% + inert carrier (white carbon black) 35%. 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 3089-11-0 Technical Specifications: Appearance: White powder Ash content (850deg): 29~35 Water content % max.: 4.5 Sieve residue (325 mesh) % max.: 0.3 Free formaldehyde content % max.: 0.1 Application: 1. It can promote adhesive force for rubber and steel cord or fabric cord. 2. Suggested ratio: 2-5 poses Rubber adhesive RA-65 with 2-5 poses resorcinol formaldehyde resin. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Shelf life is one year.
Rubber Adhesive GLR-806 / Rubber Adhesive CYREZ 964 / Rubber Adhesive HMMM / Rubber Adhesive RA-65 / Rubber Adhesive HMMM-65% Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 65% + inert carrier (white carbon black) 35%. 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 9011-5-6 Technical Specifications: Appearance: White powder Ash content (850deg): 29~35 Water content % max.: 4.5 Sieve residue (325 mesh) % max.: 0.3 Free formaldehyde content % max.: 0.1 Application: 1. It can promote adhesive force for rubber and steel cord or fabric cord. 2. Suggested ratio: 2-5 poses Rubber adhesive RA-65 with 2-5 poses resorcinol formaldehyde resin. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Shelf life is one year.
Product Description RUBBER ADHESIVE RA-65 (HMMM) CAS NO: 9011-5-6 Brief Introduction: Adhesive RA-65 is composed of Hexamethoxymethylmelamine and an inert Carrier. In conjunction with methylene receptor, it can effectively promote the adhesion between rubber and steel reinforcing material. Technical Specification: Appearance: White powder Ash Content (850oC), % : 29~35 Moisture content (Boiling Evaporation Method) â?¤4.5 Sieve Residue (325 mesh wet-method), % â?¤0.3 Free formaldehyde, % â?¤0.1 Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, RH, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. packing; 25kg/bag
Natural rubber neoprene for adhesiveplease wait... Pushed to top Item code: 38240000 | last modified on: 18 mar 2013 specifications 1.High quality and competitive price 2.Free sample 3.Best service and timely delivery Polychloroprene rubber(neoprene) Standard Q/chs25-2005 Appearance Creamy flaky or lumpy Packing 25kgs/woven polypropylene bags with a release polyethylene liner Properties 1.Excellent storage stability, process ability and safety property 2.Sunlight and heat resistance, oil resistance, chemical reagent resistance and combustion retardancy 3.Slow vulcanization rate Application It can used for manufacturing oil-resistant rubber hose and rubber boards, cable jackets, rubber sealing parts, etc, and is also widely used in making adhesive. Specification Item Specification Cr2441 1000-3000 1000-3000 1000-3000 Cr2442 3001-7000 3001-7000 3001-7000 Cr2443 7001-10000 7001-10000 7001-10000 Peel strength n/cm 90 min. 80 min. 75 min. Volatile matter% 1.0 max. 1.2 max. 1.2 max. Ash content% 1.0 max 1.2 max. 1.2 max. More information Storage life: one year below 25 'c from the date of production 25
Wholesale Colorless Rubber Crumb Polyurethane Adhesive glue Waterproof Rubber Binder, Mix with EPDM or SBR rubber granules, to install running track, playground, sport courts, jogging track, park, etc. 20kg/bucket, 960kg/pallet, 19.2ton/20ft container 200kg/drum, 16ton/20ft container
We can make mould and manufacture the different rubber feet, rubber bumper feet, rubber bumper according to the drawing, design or samples. Product name:adhesive rubber feet Material:rubber.Tpr or silicone Colour:any Hardness:65-75 shore a Size:according to the drawing, design or samples Moq:10000pcs According to your requestment, , such as drawing, design or samples
Rubber adhesive ra-65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white 3 Free formaldehyde, % ≤ 0.1 Application: this product is used in binding rubber with steel wire, nylon, rayon, fiberglass, etc. In using this product, simply mix it directly into rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with rubber adhesive rs, rh, re, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: packed in compound plastic bag, 25kg per bag. Keep in cool and dry while storage and transportation, strictly Standard
Rubber Adhesive RA/HMMM Property: This product is the improved product of Rubber Adhesive A. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: White powder Ash Content (850íµ), % : 30í½38 Moisture content (Boiling Evaporation Method) í_4.5 Sieve Residue (325 mesh wet-method), % í_0.3 Free formaldehyde, % í_0.1 Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, Rh, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp. Packing:Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp.
Properties: 1.Lg-768 has improved adhesive performance: the new material can improve the initial adhesive force of rubber and steel wire, rubber and fiber and the adhesive force after aging.The results showed that the adhesive quantity of steel wire/fiber cord increased and the adhesive force increased.In addition, the adhesive along the direction of vertical to the cord line out of the thread shape, the thread shape is obvious, the pitch is shortened, uniform. 2.Lg-768 has improved aging resistance: an hindered phenol structure is formed between the phenolic hydroxyl group and methoxy group on the molecule, which can trap free radicals in the consumed rubber system and terminate the chain reaction, thus improving the heat-resistant aging performance and fatigue resistance of the polymer material.Because this material can effectively improve the adhesive aging performance of tires, it can greatly reduce the problems of shoulder empty and delamination.Improve the high speed and durability of finished tires, extend the service life and driving safety of tires.
Descriptions: Acetate cloth rubber tape is a insulating tape made from acetate fabric coated with a rubber adhesive. Highly compatible with resins and varnish, this tape achieves stable adhesive property. As this tape is made from flexible acetate fabric, it works well on uneven surfaces and is optimal for use in binding harnesses, etc. Features: Easy to use. Working performance is good. Great flexibility to bumpy surface. Applications: For banding of wire harness. For electrical insulation and fixing electronic components.
Double sided self-adhesive rubber sealing strips.
Foamed rubber with a sticky layer. Excellent sound insulation and thermal insulation for both cars and indoors! Does not absorb moisture, no harmful substances, no odor! High adhesion to both plastic and metal! Available in thickness 6 mm and 10 mm. To order - we can make any thickness up to 80 mm.
Usage: Insulation protection of the end or middle connections of wire and cable with 1KV (10#) and (20#) or below under the environment temperature below 80 â??. Isolative sealing for communications cable connections, for pipeline protection, remedy and sealing. Properties: Economical, universal rubber tape, good self-fusion. Shedding-free, effective sealing.
High pressure rubber self-adhesive rubber belt. Usage: 80 degrees below C temperature environment, used for 1kv-10kv wire and cable terminal and intermediate joint insulation protection, but also widely used in communication cable joint insulation seal, pipeline protection, repair and sealing. Features: economic general rubber belt, with good self - adhesive, wrapped in the insulating layer, and never fall off, with good sealing performance. Jing Feng Plastic Co. Ltd. the main production and operation of the main products include tape, PVC tape, high-pressure self-adhesive tape, transparent tape, electrical tape, insulation tape, rubber tape, colored insulating tape, sealing tape, black tape, electrical tape and die-cutting products and so on.
High pressure rubber self-adhesive rubber belt. Usage: 80 degrees below C temperature environment, used for 1kv-10kv wire and cable terminal and intermediate joint insulation protection, but also widely used in communication cable joint insulation seal, pipeline protection, repair and sealing. Features: economic general rubber belt, with good self - adhesive, wrapped in the insulating layer, and never fall off, with good sealing performance. Jing Feng Plastic Co. Ltd. the main production and operation of the main products include tape, PVC tape, high-pressure self-adhesive tape, transparent tape, electrical tape, insulation tape, rubber tape, colored insulating tape, sealing tape, black tape, electrical tape and die-cutting products and so on.
High pressure rubber self-adhesive rubber belt. Usage: 80 degrees below C temperature environment, used for 1kv-10kv wire and cable terminal and intermediate joint insulation protection, but also widely used in communication cable joint insulation seal, pipeline protection, repair and sealing. Features: economic general rubber belt, with good self - adhesive, wrapped in the insulating layer, and never fall off, with good sealing performance. Jing Feng Plastic Co. Ltd. the main production and operation of the main products include tape, PVC tape, high-pressure self-adhesive tape, transparent tape, electrical tape, insulation tape, rubber tape, colored insulating tape, sealing tape, black tape, electrical tape and die-cutting products and so on.
Tile Adhesive
