Rotary Piling Rig Suppliers and Manufacturers

Rotary piling rig xrl100 Foundation machinery Features: The equipment adopt the wheel type chassis, can be transported with drill rod, , made the transportation easily economically. Cummins electronic control turbo supercharged engine meeting euro iii emission standard, saving energy, evironmental protection and strong power; The patented parallelogram articulated structure actuailizes a wide work range. The highly strengthened box-type steel structure design makes the mast of highly-rightly and anticontored, therefore the drill accuracy is heightened. The type a leg make the equipment operate easily, and improved the ability of anti-distortion. With the hydraulic presssure system adopted the technique of load sensor, which can increase the efficiency of hydraulic system and save energy. The double pr otection system of aboard rotary make the construction more safe. Standard centralized l ubricating system, allowing easier maintenance. Hydraulic piling rig.

Rotary Piling Rig XR400 Foundation Machinery It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability. The main hydraulic system adopts the negative flow control, and adopts the main power control and limit power control together which can increase the system efficiency and make the most of the engine power. It adopt three-in-one colling system which is tightly packed and has a high-effeciency in cooling. Imported Cummins electric control turbo-supercharged engine is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard.  It adopts the luffing mechanism of large triangle form to ensure the stability of construction of big holes and deep piles in hard formation.  It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost.  Normal mode and entering-rock mode of unit head are available for operation in soil and rock to improve the construction efficiency.  Winch-pressurize d and sleeve-driven functions are available for selection to satisfy various needs of the users. It is equipped with a centralized lubrication system as standard configuration; maintenance is easy. Engine Model CUMMINS QSX15-C500 Rated power kW 373 Rotary drive Max. Output torque KN . m 400 Rotary speed r/min 7~25 Max. Drilling diameter mm ￠2500 Max. Drilling depth m  92 Crowd  cylinder Max. Pull-down piston push kN  240 Max. Pull-down piston pull kN  250 Max. Pull-down piston stoke m  6 Crowd winch Max. Pull-down piston push kN 400 Max. Pull-down piston pull kN 400 Max. Pull-down piston stoke 18 Main winch Max. Pulling force kN 360 Max. Line speed m/min 60 Auxiliary winch Max. Pulling force kN 100 Max. Line speed m/min 65 Mast rake side/forwards/backwards 4°/5°/15° Undercarriage Max. Traveling speed Km/h 1.3 Max. Grade ability % 35 Min. clearance mm 450 Track shoe width mm 800 Distance between tracks mm 4700~5200 Hydraulic system Working pressure Mpa 35 Overall drilling weight t 113 Dimension Working condition mm 10995x4900x26640 Transportation condition mm 20755x3500x3910

Rotary Piling Rig XR360 Hydraulic Piling Rig Product Description It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability. The imported Cummins turbo-supercharged engine is powerful, and has sufficient power reserve. The machine adapt single row rope for main winch to figure out the wear of steel rope. extend the life-span. And high reliability. The machine adapt single row rope for main winch to figure out the wear of steel rope. extend the life-span. And high reliability. The oil cylinder and sleeve-driven functions are available for selection to satisfy various needs of the users. Normal mode and entering-rock mode of unit head are available for operation in soil and rock to improve the construction efficiency. It is equipped with a centralized lubrication system as standard configuration; maintenance is easy.

Rotary piling rig xr180dii Product description Features It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability; It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost; Cummins electric control turbo-supercharged engine is used. It complies with euro iii emission standard , in addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard; Using full electronic control technology of can bus, improves the reliability of the whole vehicle and simplify hydraulic line, fully reflects the people, machine, electricity and liquid integration; Winch-crowd and sleeve-driven functions are available for selection to , �cfa, hydraulic casing oscillator, dth hammer satisfy various needs of the users; It is equipped with a centralized lubrication system as standard configuration; maintenance is easier; The machine obtains c e certfication of t, v rheinland group. Enginemodelc ummins qsb6.7-c260 Rated powerkw194 Rotary drivemax. Output torquekn . M180 Rotary speedr/min6~33 Max. Drilling diametermm￠1600 Max. Drilling depthm60 Crowd , �cylindermax. Pull-down piston pushkn, �160 Max. Pull-down piston pullkn, �180 Max. Pull-down piston stokem, �5 Crowd winchmax. Pull-down piston pushkn210 Max. Pull-down piston pullkn210 Max. Pull-down piston stokem13 Main winchmax. Pulling forcekn180 Max. Line speedm/min65 Auxiliary winchmax. Pulling forcekn50 Max. Line speedm/min70 Mast rake side/forwards/backwards, �3, �/5, �/15, � Undercarriagemax. Traveling speedkm/h1.5 Max. Grade ability%35 Min. Clearancemm350 Track shoe widthmm700 Distance between tracksmm2960~4200 Hydraulic systemworking pressurempa35 Overall drilling weightt63 Dimensionworking conditionmm8350x4200x20480 Transportation conditionmm14380x3000x3490

Rotary Piling Rig 280DII Rotary Piling Rig XR320 Rotary Piling Rig Product Description The special hydraulic chassis for the rotating drill with extensible crawler is provided with the excellent stability and is convenient to transport. The complete machine has passed CE certification of TV Rheinland group. The imported Cummins turbo-supercharged engine is powerful, and has sufficient power reserve. The machine adapt single row rope for main winch to figure out the wear of steel rope. extend the life-span. And high reliability . Optional configuration according to customers' requirement, E.g: Crowd winch, Outrigger cylinder, Sleeve-driven and so on. The rotary drive can switch from Nromal Mode, Rock Mode and Energy-Saving Mode, the user can select a corresponding mode of th e rotary drive according to the specific working conditions, which can greatly improve the working efficiency and low the fuel consumption. It is equipped with a centralized lubrication system as standard configuration to provide more convenient maintenance and make the machine a good reliability . Engine,Model,,CUMMINS QSM11-C400 ,Rated power,kW,298 Rotary drive,Max. Output torque,KN . m,280 ,Rotary speed,r/min,6~22 Max. Drilling diameter,mm,￠2200 Max. Drilling depth,m,88 Crowd �cylinder,Max. Pull-down piston push,kN�,210 ,Max. Pull-down piston pull,kN�,220 ,Max. Pull-down piston stoke,m�,6 Crowd winch,Max. Pull-down piston push,kN,300 ,Max. Pull-down piston pull,kN,300 ,Max. Pull-down piston stoke,m,16 Main winch,Max. Pulling force,kN,260 ,Max. Line speed,m/min,60 Auxiliary winch,Max. Pulling force,kN,80 ,Max. Line speed,m/min,65 Mast rake side/forwards/backwards,,�4�/5�/15� Undercarriage,Max. Traveling speed,Km/h,1.5 ,Max. Grade ability,%,35 ,Min. clearance,mm,445 ,Track shoe width,mm,800 ,Distance between tracks,mm,3500~4800 Hydraulic system,Working pressure,Mpa,32 Overall drilling weight,t,96 Dimension,Working condition,mm,10770x4800x23550 ,Transportation condition,mm,17410x3500x3520

Tractor Mounted Piling Rig : The PPR 48-30 drill rig is ideal for Foundation/ piling drilling application in rock and soft formation. Rock formation using DTH and soft formation using Auger. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PPR 48-30 rig's flexibility means it will be mounted on tractor and air compressor will be mounted on separate trolley or truck (Rig can be mounted on two wheel or four wheel tractor upon customer request)

Rotary piling rig xcmg xr150diii Product description Features: 1., �genuine, �guang xi, �cummins, �electric control, �turbo-supercharged engine, high power, reliable performance. 2. Special telescopic rotary excavating undercarriage, equipped with double-box type derricking machanism, easy for transportation and adjustment, enabling excellent operation stability and reliability. 3. Imported kawasaki hydraulic components, reasonable power system matching and high construction efficiency. 4. Global satellite positioning system(gps), allowing remote data analysis, real-time monitoring and fault diagnosis of complete machine. 5. Independent intellectual property intelligent control system, can bus and plc control system application, including the mast verticality auto/manual adustment, depth auto detection and display, intelligent fault diagnosis control etc. Main parameters: Engine, model, , cummins qsb7-c2 02 , rated power, kw, 150 Rotary drive, max. Output torque, kn . M, 150 , rotary speed, r/min, 7~33 Max. Drilling diameter, mm, ￠1500 Max. Drilling depth, m, 56 Pull-down cylinder, max. Pull-down piston push, kn, �, 120 , max. Pull-down piston pull, kn, �, 160 , max. Pull-down piston stoke, m, �, 3.5 Main winch, max. Pulling force, kn, 160 , max. Line speed, m/min, 72 Auxiliary winch, max. Pulling force, kn, 50 , max. Line speed, m/min, 60 Mast rake side/forwards/backwards, , 3, �/5, �/15, � Undercarriage, max. Traveling speed, km/h, 2.5 , max. Grade ability, %, 40 , min. Clearance, mm, 365 , track shoe width, mm, 700 , distance between tracks, mm, 2960~4200 Hydraulic system, working pressure, mpa, 32 Overall drilling weight, t, 47 Dimension, working condition, mm, 7550x4200x19040 , transportation condition, mm, 13150x2960x3140

1.The brief introduction of 13.5 meters wheeled rotary pile drilling rig 13.5 meters wheeled rotary pile drilling rig is a kind of rotary pile drilling rig, which is suitable for building construction foundation. It is widely used in the construction of various soil layers, such as sand, clay, silty soil and so on. At the same time, it is widely used in the construction of cast-in-place piles, continuous walls, foundation reinforcement. The small rotary drilling rig has the characteristics of low noise, small vibration, large torque, muti-function, fast drilling speed, flexible in operation, high construction efficiency, various speed regulation, electronic automatic monitoring.These characteristics gradually replace some traditional piling and drilling equipment. 2.The technical parameters of 13.5 meters wheeled rotary pile drilling rig Model XWL-13.5 Work pattern oil cylinder force wire rope deadweight Drilling hole diameter mm 500-1500mm Drilling depth m 13.5 10-26 External dimension m 7.7*2.2*3.0 Weight t 8 Tire type / 900-20 Engine model / 4108 power kw 88 rotating speed r/min 2400 Power head torque kn.m 17000-22000 Power head rotating speed r/min 30-50 Maximum lifting power kn 150 Maximum stroke m 11-22 Wire rope diameter mm 16 Rotation angle ° 180 Moving speed km/h 20-30 Maximum grade ability ° 25-30 (In the continuous improvement of products, technical parameters are based on practical consultation.)

1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm. Item Unit Parameters XWDF-15 crawler rotary pile drilling rig with square power rod Working mode cylinder pressure wire rope deadweight Drilling hole diameter mm 500-1500 Drilling hole depth m 15 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 13 Maximum torque of power head kn.m 26000 Power head rotating speed r/min 20-40 Turntable rotation angle Full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in Weifang Engine power kw 145

1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm. Item Unit Parameters XWDF-15 crawler rotary pile drilling rig with square power rod Working mode cylinder pressure wire rope deadweight Drilling hole diameter mm 500-1500 Drilling hole depth m 15 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 13 Maximum torque of power head kn.m 26000 Power head rotating speed r/min 20-40 Turntable rotation angle Full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in Weifang Engine power kw 145 (In the con tinuous improvement of products, technical parameters are based on practical consultation.)

1. The brief introductions of 28 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of28 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year. The hydraulic system exclusive of reasonable matching, the summer temperature is normal excluding radiator. 3.The technical parameters of 28 meters crawler rotary pile drilling rig with circular power rod Item Unit Parameters XWDJ-28 crawler rotary pile drilling rig with circular power rod Maximum borehole diameter mm 1400 Maximum drilling depth m 28 Engine model / Cummins GBT5.9-C150 rated power / speed kn 110/2000 r/min Power head maximum torque kn.m 100 speed r/min 17-40 Feed cylinder maximum pressure kn 100 maximum lifting power kn 100 shock mm 2000 Main winch maximum lifting power kn 100 maximum single rope speed m/min 70 wire rope diameter mm 24 Minor Winch maximum lifting power kn 60 maximum single rope speed m/min 54 wire rope diameter mm 16 Move ability maximum move speed km/h 2.6 minimum ground clearance mm 340 approach angle ° 21 departure angle ° 18 maximum grade ability ° 30 Weight(excluding drilling tools in standard configuration). t 24 Dimension (transport state) (l *w* h) mm 10300*2600*3500 (In the continuous improvement of products, technical parameters are based on practical consultation.)

1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm. Item Unit Parameters XWDF-15 crawler rotary pile drilling rig with square power rod Working mode cylinder pressure wire rope deadweight Drilling hole diameter mm 500-1500 Drilling hole depth m 15 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 13 Maximum torque of power head kn.m 26000 Power head rotating speed r/min 20-40 Turntable rotation angle Full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in Weifang Engine power kw 145 (In the continuous improvement of products, technical parameters are based on practical consultation.)

1. The brief introductions of 15 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig,rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of 15 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.

1.The brief introductions of 25 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, the rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of 25 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors. The quality of the national inspection free raw materials and matching parts is more guaranteed. The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year. The hydraulic system exclusive of reasonable matching, the summer temperature is normal excluding radiator.

1. The brief introductions of 28 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of28 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors. The quality of the national inspection free raw materials and matching parts is more guaranteed. The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year. The hydraulic system exclusive of reasonable matching, the summer temperature is normal excluding radiator.