Roll Magnetic Separator is a kind of dry magnetic separator with high intensity, permanent magnet, roll-type. Roll Magnetic Separator is used for enrichment and purification of materials with a grain size of 0.1 to 25 mm and at the low magnetic sensibility. Magnets made from an alloy of rare earth elements used in the production are more powerful as compared. The magnet with this feature and the special magnet sequence on the magnetic roll consists of high gravitational forces. The resulting high magnetic attraction forces make it possible separation with high efficiency magnetic minerals with low magnetic sensitivity and very fine sizes.
It is used for deferrization of ceramic raw materials and industrial raw materials, operation of ore enrichment also be used. In addition, it is used for cleaning of high-quality quartz, magnesite enrichment, evaluation of the beach or mineral sands,cleaning of limestone dolomite, cleaning of foundry sands, cleaning of refrakter raw material, enrichment of boron, enrichment of chromite, bauxite, feldspar cleaning, clay cleaning, glass sand cleaning.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications. Advantages of Flexible Magnet: Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes. Technical Data of Flexible Magnet: Shapes: Rolls or Sheeting & Strips Magnetization: Axially Magnetized Br: 1,600 Gauss BHmax:0.60 MGOe Hc: 1,370 Oersted's Max Operating Temperature:212F/100 Density(lb/in3): 0.133
Magnetic Writing and Drawing Board Material: ABS+ Magnet
Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating amp Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range 1002000rpm Maximum mixing capacity 5000 ml Temp Range amp Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min Top Plat Size 168 x 168mm Display LCD Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm Weight 25kg
Custom Rolling Paper Booklet 4 Style Options Available 1. Rolling Paper Options Unbleached Unrefined Wood Pulp (12.5 Gsm) Unbleached 100% Hemp Pulp (12 Gsm) Bleached White Wood Pulp ( 12 Gsm) 2. Size Options One & a Quarter : 84mm) 98mm Size :98mm King Size : 109mm 3. Style Options Standard 32 Sheets 32 Sheets + 32 Filters With Lock 32 Sheets + 32 Filters With Tray 32 Sheets + 32 Filters With String 4. Packaging 50 Booklets/ Display Box 50 Booklets Boxes / Case 8 Case / Pallet Oem : Yes Origin : India Moq : 1 (40'ft Hq Container)
Magnetic equipment, magnetic separator, dry magnetic separator, magnetic roll separator, roll crusher, magnetic drum separator.
Steel,steel pipe,steel tube,stainless steel,circular steel pipe,hollow section steel tube,pipe fitting,flange,fasteners,steel wire,steel accessories,steel product,magnet, ndfeb magnet,smco magnet,alnico magnet,ferrite magnet,ceramic magnet,flexible magnet,magnetic material,magnet accessories, chemical,organic chemicals,chemical additive.Transportation agent,customs clearance service,
MATERIAL : LDPE/LLDPE repro pellet film grade CATEGORY : LDPE/LLDPE TYPE : repro pellet GRADE : film grade SPECIFICATION : LDPE repro pellet,made from clean PE roll and film.Japan origin.Best for film maker.MFI 1 and MFI 4 , 1 full container (25 tons) for each grade. datasheet included Origin : JP - Tokyo LOADING WEIGHT: 25 Ton FAS (USD/Ton) : 1200$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Material : PP Jumbo B+ Category : PP Type : Jumbo Grade : B+ SPECIFICATION : PPSS B grade.5 containers per week Origin : EU - Antwerp LOADING WEIGHT: 18 Ton FAS (USD/Ton) : 330$ Packaging : Jumbo Bag Est. Shipping Time : 15, 30, 45 days
Material : Jumbo A+ Category : PP Type : Jumbo Grade : A+ SPECIFICATION : PPSS A grade.5 containers per week Origin : EU - Antwerp LOADING WEIGHT: 18 Ton FAS (USD/Ton) : 360$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
we design, manufacture and supply shutters: rolling shutters, motorised, folding shutters
PVC Rolls as used in furniture industry, mixed colors, origin EU, excellent quality, quantity 75 mt, regularly 50 mt/month, pictures available, price USD475 CNF.
Magnetic tubes are a simple low cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing, according to the environment of your product, these magnetic filter bars can be made with alnico, ceramic or rare earth magnet material. They can be easily installed into machinery or assembled according to the wishes of the customers. Encased in either 304 or 316 stainless steel tubes 25.4mm diameter, we offer them with either standard ferrite magnets or high intensity rare earth magnets (up to 12, 000 gauss). We manufacture them specifically to the length requested by the customer. The sealed stainless steel ends are drilled and tapped for fixing purposes
Our products 57mm*48mm thermal paper rolls are a common paper roll size for credit card terminal printers. It is widely used for every market. Below is detail information for this product. MODEL # T574801 Product Description: Type: Single White Thermal Paper Roll Width: 57mm Roll Diameter: 48mm Weight: 55gsm Length:25meters Core size:13mm*19mm paper core Package: 10rolls shrink-wrapped ,100rolls per carton Carton size: 246mm*246mm*234mm Duration: 3years End of paper roll with red warning line 100% lint free paper reduces printer jams Specifications for Thermal Sensitive paper:
Essential details Place of Origin: AUSTRIA Type: Printer Color Print Speed: NO Interface Type: usb Max. Resolution: 203/300 dpi Max Paper Size: 80MM Black Print Speed: 260MM/S Style: Black and white Use: Receipt Printer After-sales Service: Repair, Free spare parts, Return and Replacement, Onsite Training and Inspection, Call Center and on-line Technical Support Private Mold: Yes Name: 80mm Kitchen Thermal Receipt Printer Printing Method: Thermal Line Printing Interface: USB Interface Paper width: 79.5+/-0.5 Mm Printing Speed: 150-250mm/s Power supply: DC 24V/2.5A Print Comand: ESC/POS Paper type: thermal paper Cutter: Auto Cutter Keywords: 80mm receipt printer Supply Ability Supply Ability 1000000 Unit/Units per Year thermal receipt printer Packaging & delivery Packaging Details Wall hanging order sound reminder thermal receipt printer 80mm bill ticket printer Dimension 61.5X37X53.5cm(LXWXH) 12 units / carton Lead time: Quantity(units) 1 - 300 >300 Lead time (days) 5 To be negotiated
