Technical parameter: (1) operating voltage: +5vdc (2) operating current: 8ma (3) operating frequency: 315mhz- 433.92mhz (4) modulate mode: ask (5) receiver sensibility: -115db. Size of the module:38.10mm*14.28mm Package in plastic bag, then into carton box.
Spec: Frequency:868/433 MHz Modulation: FSK Supported as well as ASK Circuit Shape: PLL Data Rate: 3K~ 1000Kbps Channel Spacing: 180KHz Sensitivity: 20 dB Sinad Operating Temperature Range: -40 ~ +85 Centi degrees Receiving Current: 5.7mA 5V; Sleep Mode Current: 50 nA Digital RSSI Output Stable; Easy to Use, Low External Parts Count Compliant with FCC, IC, ETSI, RoHS Dimensions: 3.2 x 1.4 x 0.5 (L x W x H) in cms Weight: 5 gms
Parameter: Modulate Mode: ASK/AM Frequency: 315/433.92MHz f¦aOf¦aoother frequency availablef¦aO© Voltage: 3~5V Data Rate: 4.8Kbps Sensitivity: -112dbm Current: 10~12mA Operate Temperature: -20 to +85 Centigrade Degrees Channel Spacing : +/-220 KHz IF frequency: 10.7MHz Size: 31*13.5mm Pin assignment: GND DATA DATA VDD VDD GND GND ANT.
Parameter: Data rates to 10,000bps Modulation: ASK/AM Frequency: 315/433.92Mhz/868M fªaoaOfªaoaoother frequency availablefªaoaO© Voltage: 5V(DC) +/-10% Bit-rate: 9.6kbps/4.8kbps Current: 4.6mA Sensitivity: -110dBm Operating temperature: -40¡æ ~ +85 ¡æ Dimension: 43mm(L)*12mm(W)*5mm(H) 10.7 MHz high rejection IF filter Power down mode with very low supply current (50nA typ) Channel Spacing : +/-170 KHz Pin assignment: VSS DATA(SHUT) DATA VDD VDD VSS VSS ANT. Foam Protection Inside; then in Carton outside
Application: Wireless Remote Control Switch, Smart Plug, Wireless Doorbell, Vehicle Anti-Theft Device(RKE), Weather Station, etc. RF Advantages Parameters flexibly configurable and modifiable with software, simple and user-friendly operations High measured sensitivity, narrowband applications, long communication distance Easily passing safety Blocking Test, very good immunity Integrated DutyCycle operating mode, reducing the average operating current, ultra-low power consumption Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 300~960MHz (Support software settings) Modulation Mode: OOK/(G)FSK Data Rate: 0.5~30Kbps/0.5~100Kbps(FSK) Sensitivity: -114 dBm(1kbps 0.1%BER) Measured Distance: Product: > 300m, Demo Board: > 1000m Blocking Immunity: SR=1Kbps, ¡¡¡ì¡¨¨ 1/2/10MHz, Offset: 52/74/75db Power Supply: 1.8~3.6V Rx Current: 4.2mA@434MHz; 4.6mA@868MHz Duty-Cycle Rx Mode: Support software settings, Reduce average working current Receiver Start-up Time: DutyCycle: On 12.3ms/off 7.3ms Receiver Wake-up Time: < 1ms Wake On Radio Function: Provide for setting of Preamble, Syncword and other conditional wake-up Crystal: 26MHz+/-20PPM Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: SPI-3Wire Chip Package: QFN-16 IC Size: 3X3X0.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Product Name:Transmitting and Receiving Modules for Rechargeable Wireless Mouse Min. Order: 20 Sets Port: Shenzhen, China Production Capacity: 5000000 Per Month Payment Terms: T/T Model NO. BCM-V3 shape DIP Application Specific Integrated Circuits Conductive Type Unipolar Integrated Circuit Integration ULSIC Technics Thick Film IC Type Digital / Analog IC Transport Package Box Origin China Support USB 1.1 protocol, compatible with USB2.0 protocol Maximum reporting rate: 250/125Hz It supports three pairs of codes, including free code (default), power up pair code and software pair code. Support for mouse DPI software configuration Support 6 custom button functions? support for waking up PC functions. Built in MTP supports soft RF testing, device information configuration, and preservation of code information. 16 frequency hopping frequency points that support the intelligent generation of code time at 2402MH ~2480MHz frequency points. Support 40bit pair code ID Support FCC testing? Support power on RF detection and display test results through PC software. Support automatic test function for RF Support USB-IF testing
Kst-rx818 fsk frequency modulation module(superheterodyne) Qualifications:: 1.Completely independent module 1 & module 2 2.Module 1: frequency:433.92mhz modulation mode: fsk/ask (modulated through feet) Module 2: frequency: 315mhz modulation: fsk/ask (modulated though feet) 3.Reveive insibility: preced to-100dbm 4.Operating voltage: 5v (+/-10%) 5.Receive band: narrow band 6.Transmit rate: preced to 9.6kbit/s 7.Certification for fcc 3c 8.Pcb length:28.5mm Pcb width: 17mm 9.Space between port and feet: 2.5mm No.1 foot---vcc No.3 foot---ant No.5 foot---cl No.6 foot---data No.8 foot---pdo No.10 foot---pdwn No.247&9---gnd
And have a monomode otical input suitable for 1290 to 1600nm wavelengths, a teminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75ª+
The amplifier supply voltage pin Connect to 24V (DC).The modules have a monomode optical input Suitablefor 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75ª+.
We are a leading high-tech enterprise and a leader manufacturer in researching & developing, manufacturing, marketing, and after-sales servicing of LED application lights, providing a wide range of LED lightings: LED fluorescent tubes, LED strips, LED spotlights (bulbs), LED street lights, LED modules, etc. Our products have received warm welcome and wide popularity all over the world, particularly in Europe and America.
Spec: Modulation: FSK Supported as well as ASK Frequency: 868/434 MHz Operating Voltage: 2.1V ~ 4.0V Operating Current: 7.5mA Output Power: 6.8 dBm 3V Circuit Shape: PLL Small Size with Size of PCB: 16x12mm¡f¦o»
QN-Kit07 Indoor Receiver Kit Rf Wireless Audio Receiver Transmitter Module Feature 1.433/868/315 Mhz high quality transmitter & Receiver Kit for garage door 2.learns up to 100 transmtters 3.can printed logo on back side 4.2/4 channel independent set-up 5.best price and quality 6.can be OEM or ODM Model No.: QN-Kit07 Power supply: 9-24V DC/AC Measure Type: Fixed Code & Rolling Code Relay spec: 12A 14VDC or 7A 120VAC Operating distance: 40-50m Gurantee: 1 Years Modulation: Ook/Ask/Fsk Application: : garage door opener,alarming system,security system,vehicles etc HS Code: 85269200 Power Adapter: Yes MOQ: 500 CE: Yes
Working voltage:DC5V Working Frequency:315MHZ MOQ:500pcs Case material:ABS flame-retardant Working temperature range:-20~80 ípC Service Life: 10years Warrant:one-year replacement,lifetime maintenance Product Features Learn single button:Change the traditional learning method,setting the button freely. Control freely:You can control several electrical equipments with a same remote ocntrol,or use several remote control to control a same electrical equipment. Easy installation:The wireless switch replace the traditional wall switch directrly,not only not needless to change the traditional wiring,but also non-destructive for original decoration. Saving material:Connecting the power line of intelligent switch module to lamps directly,needless the control line for loop.It is simple and easily that all lights are in parallel connection and only 1 way of line for one room,saving money and time.The traditional 86 type switch can only control 3 ways of lights,and the wireless intelligent switch can control more than 144 ways. Use safety:The remote control are safe to use for elderly and children because they are away from the heavy-current,set user's heart at rest.Load the variety:Can connect all kinds of home lighting equipments,such as incandescent lamp,fluorescent lamp,energy-saving lamp and electric fan and other home electric appliances. Beautiful and practical:With the international popular color on the surface design ,multi-colour;made of high-end electric material,high strength,no pollution,safety and environment;advanced surface treatment technology,wear resistance,fadeless and ageing resistance. Variable position:You can install the wireless switch anywhere by yourself. Configuration flexible:Can add the control module or remote control anytime anywhere,part also full sets configuration. Long service life:Choose with the standard component,all through strict sieving,high pressure testing,aging,to ensure the number of switching amounted to a hundred thousand,function superiority,remove the customer's worries. Easy maintenance:Use standard plug,needless to remove the wire when changing,plug and play. Product Functions Aoft-start funtion:Intelligent lighting realized the lighting dimming function.No longer worried for dazzling lamplight when you get up in night.Adapt your eyes to the brightness of lights slowly and protect from lighting irritation.Extend the service life of light bulb and tube because of no impulse current. Dimmer function:Don't you need to create a rich lighting effect when you get together with family or friends?Don't you need to turn the light softer when you enjoy the romantic moment with your lover in bedroom?Intelligent lighting,controlling the brightness of lighting freely can be easily realized.Make your life with your family more warmth and romantic!With it,seems to have a temperature and feeling of home,a rich expression! Memory sate:Don't you want keep the brightness of light same as last time you turn off when you turn on next time?Intelligent lighting,memory the brightness of light last operation can be easily realized.Save your time to turn the brightness of light! Scene function:You can set freely different lighting for different scene and keep automaticlly by your mood or activities.Overt or covert,on or off,the combination of lighting and scene make our vision even fashionable,and make spatial performance displayed in an even dynamic and colorful manner. Turn on/off all:Press the specific button bindings to control all the lights or other electrical equipments of both single and all areas.Busy you are no longer turn off the lights and appliances one by one when have a rest or go out in night! Integrated control:When in bed,have you even think about controlling all lights or appliances like the controller on the bedside table in hotel?As long as selecting WEIONE intelligent switch,it can be easily realized! Size:56mm*35mm*24mm
Wireless Interface RF Modules can be interfaced with R5.0V1 weighing scale PSBs to Make your weighing scale machine wireless .It can Transmit wireless data to a distance of about 100 feet.You can even receive the wireless weight data to your PC for wireless data acquisition .We will provide you free technology support for you to build a complete wireless weighing system .
RF Advantages: LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging Support frequency hopping communication (LoRa mode) Support specified node communication and broadcasting communication modes to facilitate customers to Set up the wireless network Support self cycle reset function Support module firmware upgrading Application: AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc. Parameter: Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting) Modulation Mode: LoRa/FSK Output Power: 2~20dBm Sensitivity: -139dBm (Max) Data Rate: 1.2~115.2Kbps(Provide for setting) Tx Current: 130mA (+20dBm) Rx Current: 20mA Standby Current: 2|¡¡ì¬A Frequency Deviation: 10~50kHz Receive Bandwidth: 42~166kHz Interface: 8N1/8E1/8O1 TTL UART(Scalable exteriorRS232\RS485) Communication Distance: > 5000m@LoRa Antenna Impedance: 50|¸ Operation Temperature: -20 to +70 Power Supply Mode: DC4.5~5.5V Module Size: 47X26X10mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: AMR Auto Meter Reading, Industrial Control System, Wireless Remote Control Equipment, Mining Safety Monitoring, Smart Home, Smart Security, Internet of Things and Other Wireless Devices, etc. RF Advantages: High output power, very good receiver sensitivity, long communication distance Strong interference resistance to meet wireless certification standards Meet the requirements of mainstream wireless applications, high cost-effective No output power reduction at a supply voltage down to 1.8V Parameter: Frequency: 868/915MHz Modulation Mode: FSK/GFSK/OOK Output Power: 20dBm Sensitivity: -123dBm (1.2kb/s in FSK) Data Rate: 300Kbps (FSK mode) Tx Current: 125mA (+20dBm) Rx Current: 9.3mA Standby Current: 0.1|¨¬A Interface: SPI Communication Distance: > 1000m(1.2kb/s) Antenna Impedance: 50|¸ Operation Temperature: -40~+85 Power Supply Mode: DC1.8~3.7V, 1.8VTransmission power Of power supply will not fall Module Size: 16X16mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".