Redispersible Polymer Powder is spray dried redispersible polymer powder,also named as Redispersible emulsion Powder or latex powder, designed for the construction industry to enhance the properties of dry mortar blends, able to Redispersible in water and react with hydrate product of cement / gypsum and stuffing, form composite membrane with good mechanics intensity. It improves the important application properties of dry mortars, like longer opening time, better adhesion with difficult substrates, lower water consumption, better abrasion and impact resistance.
Redispersible Polymer Powder (RDP) is redispersible latex powders, based on vinyl ethylene acetate emulsion,which are divided into ethylene/vinyl acetate copolymer, vinyl acetate/vinyl tertiary carbonate copolymer, acrylic acid copolymer, etc., powder bonded after spray drying It uses polyvinyl alcohol as a protective colloid. This kind of powder can be quickly redispersed into emulsion after contact with water, because the redispersible latex powder has high bonding ability and unique properties, such as: water resistance, construction and heat insulation, etc.
Application range - Tile adhesive mortar - Skim coat - Self-leveling mortar Skim coat (Putty) - EIFS system mortar - Tile adhesive/ Tile joint filler - Self-leveling mortar - Skim coat - Self-leveling compound - Repair mortar - Tile adhesive/joint filler - Waterproof mortar - Tile Adhesive/Tile joint filler - Flexible waterproof putty
Key Properties of Redispersible polymer powder RDP - Increase adhesive/cohesive strength - Higher flexural strength - Excellent rheology - Improved workability - great durability and abrasion resistance - Improved water retention capability and open time RDP-VAE has good dispersibility and can be re-emulsified into stable polymer emulsion after adding water, so as to improve the performance of the product . It is the powder formed by spray drying of polymer emulsion, also known as dry powder glue. This powder can be rapidly reduced to emulsion upon contact with water, and maintain the same properties as the initial emulsion,that is, the evaporation of water will form a film, this film has high flexibility, high weather resistance and high adhesion to a variety of substrates. This kind of products are mainly used in external wall insulation, ceramic tile bonding, interface treatment, bonding plaster, plastering plaster, building inside and outside putty, decorative mortar and other construction fields, with a very broad range of use and good market prospects. Its promotion and application, greatly improve the performance of traditional building materials, greatly improve the building materials of the cohesive force, cohesion, flexural strength and impact resistance, wear resistance, durability, so that the building products with its excellent quality, high-tech content, to ensure the quality of construction projects.
Shandong Zhuo Jun Industrial Co., Ltd. is the first and only comprehensive manufacturing enterprise, which independently researches, develops and manufactures a series of construction chemical material additives in Jinan, the capital city of Shandong Province. Main products are Redispersible Polymer Powder (RDP), Hydroxypropyl Methyl Cellulose (HPMC), Polyvinyl Alcohol (PVA) and Superplasticizer(SPs). As an environmentally friendly high-tech enterprise, ZHUO JUN values the customer relationships and endeavors to be a reliable manufacturer and supplier. It also takes an active role in sustainability because it believes in making the world a better place for future generations. Product Description ZHUOJUN redispersible polymer powders are free flowing white powders obtained by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are widely used improve cohesion, adhesion, flexibility and workability in constructions especially in dry-mix mortar. Typical Applications - Tile adhesives - Tile grout - Wall putty - External insulation and finish systems (EIFS) - Cement, lime or gypsum-based finished dry-mix mortar - Self-leveling flooring compounds - Repair mortars and crack fillers - Cement-based plasters - Gypsum fillers Advantages -Improves workability -Improves adhesive strength -Improves abrasion resistance -Improve application properties Technical Data for ZJ-701 Model No. ZJ-701 Appearance flowing white powder Particle Size 80 µm Bulk Density 500-600 kg/m³ Solid Content min. 98 % Ash Content (850) 12±2 % pH Value 5.0-8.0 MFFT ()(1) 0 Tg ()(2) 0-4 Application tile adhesives, tile grout, wall putty, external insulation and finish systems (EIFS), interface mortar, self-leveling flooring compounds, repair mortars, crack fillers, cement-based plasters, gypsum fillers
Product description Polyva YT-8012 is a copolymer powder of vinyl acetate and ethylene which is easy dispersible in water and has good saponification resistance. and it also has a wide range of usage. Suggest Applications Suitability Flexible thin-bed mortars Tile grouts/joint fillers Tile adhesive(C1/C1S1/C2) Skim Coat/ Wall putty(Indoor/outdoor) Plasters/ Renders Troweling compounds for Floor/wall Gypsum based mortars Powder paint Self-leveling dry mixed mortars Highly recommended Recommended Suitable Properties Ready-mixed mortars modified with POLYVAE® YT-8012 can improved adhesion, flexural strength in bending,abrasion resistance,deformability.it has good rheology and water retention.can increase the sag resistance of tile adhesives,it can made up to tile adhesives with excellent non-slump properties and putty with good properties. Special features POLYVAE®YT-8012 has no effect on rheological preperties and is a low-emissions, general-purpose powder in the medium Tg range. It is eminently suitable for formulating compounds of high ultimate strength. Application Typical applications for POLYVAE®YT-8012 : not only for blending with inorganic binders, such as cement, gypsum, plaster and hydrated lime for the manufacture of thin bed mortars, self-leveling mortars, wall troweling compounds, tile adhesive and joint filler, but also as the exclusive binder for synthetic-resin-bound systems. Storage POLYVAE YT-8012 should be stored in a cool and dry place and protected against moisture. Since the product is thermoplastic. the storage temperature not over 30 Deg.C. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. If you cant use out one bag on time, youd better seal it again. Package In 25kg Paper compound plastic bags. Packing on request Additional Information: Appearance White powder Stabilizing system Polyvinyl alcohol Additive agent Mineral Anti-block agent Product Technical Data Item Unit Value Solids content % 98.0-100.0 Ash content (1000) % 10-14 Bulk density g/l 480-590 Average particle size �¼m ~80 PH value 5.0-8.0 MFFT() approx 4 Tg () approx +10 Safety notes The above date is in accordance with our knowledge,but do not absolve the clients carefully checking it all immediately on receipt.please do more testing before using it To avoid the difference formulation and different raw materials. and we reserve the right to alter our product and without informing in advance.
1. Product details Ded to apply to tile adhesive, skim coat indoor or outdoor, troweling compounds, gypsum based mortars, it can be also und bags with pe liner. 8. Delivery Delivery time: within 15~20days after payment confirmed. 9. Storage: 3s-6001yh must be stored in a cool and dry place. To prevent moisture penetration, the storage temperature is not over 30 degree. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Packaging which has been opened should be sealed again as soon as possible. Not exposure to water, sunlight, especially during transportation. 3s-6001yh storage time should not exceed 6 months from the date of delivery. Packing: 20/25kgs /bag. Paper compound bags with pe liner.
1. Product details Name: redispersible polymer powder (rdp) Brand name: 3s (degree):0~5.0 3. Product description 3s-6001yh is a copolymer powder of vinyl acetate and ethylene which is easy dispersible in water and used polyvinyl alcohol as protective colloid. 4. Product features 3s-6001yh can improve dry-mixed mortars performances: Adhesion strength Anti-sponification Abrasion resistance Water retention Sag resistances in tile adhesive Non-slump in skim coat 5. Product application 3s-6001yh is highly recommended to apply to tile adhesive, skim coat indoor or outdoor, troweling compounds, gypsum based mortars, it can be also used for tile grouts, thin-bed mortars and self-leveling compounds, etc. 6. Dosage 3s-6001yh may be suggested to add 1~3% into dry mixed materials depending on actual application, desired performances and user's professional experimental experiences. The exact dosage must be evaluated through mature experiments before using actual application in bulk. 7. Packing Packing: 20/25kgs /bag. Paper compound bags with pe liner. 8. Delivery Delivery time: within 15~20days after payment confirmed. 9. Storage: 3s-6001yh must be stored in a cool and dry place. To prevent moisture penetration, the storage temperature is not over 30 degree. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Packaging which has been opened should be sealed again as soon as possible. Not exposure to water, sunlight, especially during transportation. 3s-6001yh storage time should not exceed 6 months from the date of delivery. 20/25kgs /bag. Paper compound bags with pe liner.
Redispersible polymer powder is soluble in water. Maissen RDP is based on Vinyl acetate ethylene copolymer and use PVA as the protection colloid. Could disperse in water very well and form the emulsion. Maissen redispersible polymer powder can increase the flexibility, workability, bonding strength and water proofing of mortar. Can be widely used in many kinds of dry mortar.
The redispersible polymer powder product is white or off white flowable powder, which is a copolymer of ethylene and vinyl acetate, and uses polyvinyl alcohol as a protective colloid. Purpose: ceramic tile adhesive bonding mortar of external wall external insulation system external wall external insulation system plastering tile jointing agent self flowing cement flexible putty for inner and outer walls flexible crack resistant rubber powder polystyrene particle thermal insulation dry powder coating polymer products with high requirements for flexibility effect: It has outstanding waterproof performance, good bonding strength, increases the elasticity of the and has a long opening time, endows the with excellent alkali resistance, improves the adhesion / adhesion, flexural strength, plasticity, wear resistance and workability of the mortar, and has stronger flexibility in the flexible crack resistant . Role of redispersible emulsion powder: redispersible emulsion powder forms a film after dispersion and plays a reinforcing role as the second adhesive; the protective colloid is absorbed by the system (it will not be damaged by water after film formation, or secondary dispersion); the film-forming polymer resin is distributed in the whole system as a reinforcing material, thereby increasing the cohesion of the
The redispersible polymer powder product is white or off white flowable powder, which is a copolymer of ethylene and vinyl acetate, and uses polyvinyl alcohol as a protective colloid. Purpose: ceramic tile adhesive bonding mortar of external wall external insulation system external wall external insulation system plastering mortar tile jointing agent self flowing cement mortar flexible putty for inner and outer walls flexible crack resistant mortar
Improves flexibility, cohesiveness, and water retention in mortar. It enhances bond strength and workability of dry mix mortars
Industrial Chemicals RDP redispersible polymer powder factory Redispersible polymer powder for putty Dry Mortar Additive
MAISSEN REDISPERSIBLE POLYMER POWDER Redispersible polymer powder is soluble in water. Maissen RDP is based on Vinyl acetate ethylene copolymer and used PVA as the protection collid. Could disperse in water very well and form the emulsion. Maissen redispersible polymer powder can increase the fleibility, workability, bonding strength and water proofing of mortar. Can be widely usedd in many kinds of dry mortar. Application Recommendation: Wall putty, tile adhesive, EIFS surface mortar, EIFS adhesive mortar, plaster, joint filler. Package: 25kgs per bag 20'FCL can load 14 tons with pallets / 16 tons without pallets 40'FCL can load 28 tons with pallets
Redispersible polymer powder (RDP/VAE), hydroxypropyl methylcellulose (HPMC), polycarboxylic acid superplasticizer (PCE), polypropylene stabilized fiber (PP fiber).
Redispersible polymer powder ,rdp,hpmc,hemc,hec,cellulose fiber.
Redispersible Polymer Powder, Rdp, Cellulose , Hpmc, Hemc, Pp Fiber, Pva.
HPMC( Industrial grade) Properties: Appearance:White powder Particle size:98.0%min through 100mesh. Charring temperature:280-300 Deg.C. Bulk density:0.25-0.70g/cm3(Usually around 0.5g/cm3) Real specific gravity:1.26-1.31 Browning temperature:190-200 Deg.C. Surface tension(2% water solution):42-56 dyn/cm. It can be dissolved in water and some organic solvent such as ethanol,propyl alcohol,ethylene chloride,the water solution is of surface activity,It is a nonionic surface active agent,Gelation temperature is different for different grades. Applications: Chemical ingredient HPMC are widely used in food ,cosmetic and other daily use chemical lines, Typical usage as following: A. Industry grade Used as construction material such as plaster, Gypsum, renders, mortars, tile adhesives, wall putty, fillers, emulsion paints, self-leveling compounds, or used for PVC polymerization. B. Cosmetic and daily use chemical. According to properties of HPMC, it can be used as thickening agent, emulsification reagent, suspending reagent, stabilizing reagent, water retention reagent, rheological behavior reagent, Thus be used in all kinds of cosmetic, toothpaste and shampoos . Packing, storage, transportation: 25kg bags inner with PE bag. Keep dry where good ventilated, Do not wet ,and keep from sunshine when transport.
Calcium formate 98.0%min CAS No.:544-17-2 Physical and chemical propertiesï¼? Slightly hygroscopic, slightly bitter taste. Neutral, non-toxic, soluble in water. Aqueous solution is neutral. Formate calcium solubility with temperature change is not big, at 0 when the 16 g / 100 g water, 100 for 18.4 g / 100 g of water. Specific gravity: 2.023 (20 ), bulk density, 900-1000 - g/L. Heat decomposition temperature > 400 . General Application : It widely used in the building industry as construction materials, such as faster setting, early strength gain acceleration admixture for concrete or dry mixed mortars. It is also used as new feed-stuff additive, fit for various animals. Acidification. mildewproof. reinforce calcium.antibacterial. And also can be used for leather product. Packing: A.Standard packing:In 25kg PP woven bags inner with PE bags B. 500kg or 1000kg jumbo bags or other special packages as clients request. Storage: Suggest stored in a cool and dry place and protected against humidity .
1.Characteristics/Chemistry Polypropylene Fiber is a kind of high intensity bunchy mono- filament fiber mainly made of polypropylene by special technique, which could effectively prevent concrete micro-crack, as well as improve concrete performance of anti-crack, anti-infiltration, anti-concussion and anti-shock. 2.Material:Polypropylene Type:Bunchy mono-filament Color: White Identical Diameter(µm):16/18/25/35/other Elongation at Break(%): 15 Lengthmm:3/6/9/12/15/19/50±1 Modulus of ElasticityMPa3500 Tensile Strength MPa)450 Densityg/cm3:0.91~0.93 Acid & Alkali Resistance: Strong 3.Application ï?¬Polypropylene fiber into concrete or mortar, could effectively prevent temperature change and Micro-crach which is caused by palstic and dry shrinkage. ï?¬Projects like concrete road,bridge,airport road and factory floor which strictly require cracking resistance. ï?¬PP Fiber is widely used in roads, bridges, underground waterproof projects and roof, walls, pools, basements of civil construction industrial. 4.Packing (1).24kg plastic bag.600grams*40bags inner. (2).Bulk package. (3).As clients requested. 5.Storage To be stored in its closed original package,keep cool and dry, avoid humidity.
