rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name rail stopper Usage rail stopper Application rail stopper Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
we can offer minimum 2 million tons to be shipped in two months steel rails R50-R65 cut in 1,5 meter price usd 255 per mton CIF ASWP payment LC irrevocable confirmed payable at sight
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
- Used Rail STEEL in stock - R-50/R-65 Procedure 1. Buyer shall issue LOI(Letter of Intent) to Seller 2. Seller shall issue SCO(Soft Corporate Offer) to Buyer and Buyer shall issue ICPO(Irrevocable Corporate Purchase Order) to Seller when it is accepted. 3. Buyer shall issue MT705 or the attached BCL(Bank capability Letter) through their bank to prove the bank capability. 4. ICPO shall be written with Buyer companyâ??s letterhead, and include Buyer banking information and representativeâ??s passport copy 5. Seller shall issue to Buyer the draft of SPA(Sales and Purchase Agreement) together with IMFPA(Non-Circumvention, Non-Disclosure Agreement) & NCNDA(Irrevocable Master Fee Protection Agreement) and all of agreements are signed(Sealed,Endorsed) together when both agree. 6. Buyer shall issue the MT700, 100% Irrevocable At sight L/C (Letter of Credit) through the bank SWIFT for the full value of the commercial invoice. 7. Seller's bank shall issue PB(Performance Bond) equivalent to 2% of the value of the L/C to the buyerâ??s bank after Sellerâ??s bank approves the L/C. 8. The delivery schedule of the signed SPA (contract) shall keep on time and shipment shall arrange as soon as possible. Buyer can check and get the followings once the BCL(proof of bank capability) and MT700 are transferred and confirmed through the bank SWIFT system.. Seller's business license Manufacturer Export license Certificate of ownership Certificate of Origin Certificate of Export Permission Proof of Product Certificate of Chemical Composition SGS report for technical specification test Ownership transfer Sight Inspection for Seller's Warehouse Any of additional documents shall be exchanged only through the secured Bank channels(Bank SWIFT) such as MT700 or MT705. If you are a real buyer, feel free to contact me. The seller has 5 million tons in stock.
PRICE & ORIGIN RAIL SCRAP & HMS-1,R TOO-EXPENSIVE & IncLUSIVE can be in possession,of abv-RAIL.SCRAP,in 24- hrs-of ur filling up of- enclosed
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
HS Code 73021090 PRICE = US$ 250 CIF ORIGIN: SOUTH AFRICA MIN ORDER: 200 TONS PACKAGE: CONTAINERS Standard & Grade 100% Used Rail (R50-R65) with specifications as per mentioned below:. CHEMICAL COMPOSITION: C 0.54 0.82 Si 0.18 0.40 Mn 0.60 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75 These scraps consist of R50-R65 of Rails as R50 (51.67Kg/M Gost-7173-75), R65 (64.72Kg/M Gost-8165-75) According to Incoterm 2000. The Rails shall conform to ISRI CODE R50-R65 and will be Used Rail Steel Scrap- Standard section Rails. Materials will be, free from Mud, Dust, Fluff, Non-Ferrous inclusion, excessive rust, and other impurities. Free from any substance and coatings any organic waste and other harmful substances. Dirt, Dust Rust fluff and other immunity not allowed.
Product Description R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. Price of product ( USD price or FOB price) : USD 250 - 260 per MT Product origin : Europe Key Specifications/Special Features : Nominal Chemical Composition. Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% ... Nominal Specification for R50 51.67 kg/m GOST 7173-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.88% ... Nominal Specification for R65 64.72 kg/m GOST 8165-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.8" Minimum Order Size and Packaging details : 12500 MT
Used rails are a sustainable and affordable option for rail projects. They are made from high-quality steel that has been recycled from old railway tracks. Used rails are often available at a fraction of the cost of new rails, and they can be reused to create new tracks or to repair existing tracks.
R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. b) R65: used long rail steel scrap in compliance with ISRI standard classification R65 (64.72 kg/m), in length 1 & 1,5meters on per bar basis. HMS 1/2 STEEL METAL SCRAP FOR SALE: Iron scrap HMS1 & 2 C: 0.06-0.082% Mn: 0.75-1.05% SI: 0.13-0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% R - 50 [ 51.67Kg/M] and R -65 [ 64.72 Kg/M ] grades as per ISRI 027-029 and GOST 7173-75 / GOST 8165-75, Cut to length [in buyers option ]