Radium is a chemical element whose chemical symbol is Ra. Its atomic number is 88. It is a silver-white alkaline earth metal with ravdioactivity. When uranium is leached from uranium ore by sulfuric acid, radium sulphate is present in the slag, and then converted into radium chloride. The strontium salt is used as a carrier to carry out fractional crystallization, and a pure radium salt can be obtained. Suzhou Bojie Resin Technology Co., Ltd. provides high efficiency radium removal resin with high exchange capacity, high selectivity, fast removal rate, low environmental requirements, mild operating conditions, simple equipment, high processing precision, reusable and cost saving. Wait, economical and practical. Related Products: Gold extraction resin Silver extraction resin Uranium extraction resin Nickel extration resin Calcium and magnesium removal resin from brine Mercury removal resin Copper removal resin Cobalt removal resin from wastewater Special resin for chromium removal
Calcium and Magnesium removal ion exchange resin from lithium solution Salt lake brine contains trace amounts of calcium and magnesium ions. In order to purify lithium solution, calcium and magnesium ions need to be removed. The removal of calcium and magnesium ions by ion exchange resin is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits
Lead is a heavy metal pollutant. The reason for its high toxicity is that it can be accumulated in the human body. Once it enters the human body, it is difficult to remove it, and it can directly damage the nervous system of the human body, causing anemia, nerve dysfunction and kidney damage. It affects brain function such as mental development and memory in infants and young children. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin for lead removal, with high exchange capacity, good mechanical strength and convenient regeneration. It is widely used in the removal of heavy metals in wastewater.
Lead is a widely distributed element in nature and one of the elements commonly used in industry. Lead and soluble lead salts are toxic, and lead-containing wastewater is a serious hazard to human health and animal and plant growth. According to reports, lead loss is 4.54-6810mg for every battery produced, followed by the petroleum industry to produce gasoline additives. The lead content in wastewater exceeds the national standard by a hundred times, posing a great threat to groundwater sources. If it is not treated, it will inevitably bring great harm to the environment and society. The use of ion exchange to treat lead-containing wastewater has a good lead removal effect, and industrial lead-containing wastewater can achieve discharge up to standard, with little harm to environmental pollution. The ion exchange resin has a long service life and can be repeatedly used for regeneration. Suzhou Bojie Resin Technology Co., Ltd. provides lead removal resin, which has the advantages of high selectivity, easy adsorption and desorption regeneration, reusable, good controllability and simple operation, especially suitable for the treatment of lead-containing wastewater.
Radioactive waste is produced in large quantities along with the development of the nuclear industry, and radioactive waste water can cause great harm to the environment. Radon has a large share of radioactivity, so removing plutonium is critical. Ion exchange resins are favored for their excellent selectivity and high temperature resistance. Suzhou Bojie Resin Technology Co., Ltd. provides ion exchange resin for removing strontium ions. It has good selectivity, obvious removal effect, simple regeneration method, good mechanical strength, and economical efficiency. It is widely used in the removal of radioactive waste. Related resins : Tungsten and molybdenum extraction smelting resin (tungsten and molybdenum adsorption, purification Uranium extraction and separation resin (uranium adsorption, purification) Radioactive metal adsorption separation resin (element treatment of uranium, radium, thorium, thorium, etc.) é?¼ extraction smelting resin (é?¼ adsorption, purification) Extraction of smelting resin (cobalt adsorption, purification) Gallium extraction smelting resin (gallium adsorption, purification) Vanadium extraction smelting resin (vanadium adsorption, purification)
Phosphorus-containing wastewater mainly comes from chemical, biochemical and metal surface treatment industries. Characteristic pollutants include fluoride, total phosphorus, organic phosphorus, inorganic phosphorus, phosphate and other harmful substances. Phosphorus will cause eutrophication of water bodies, so that water bodies contain Oxygen is extremely degraded, endangering the ecological environment Suzhou Bojie Resin Technology Co., Ltd. provides dephosphorization resin, which has the characteristics of large exchange capacity, high mechanical strength, high temperature resistance and convenient regeneration. It is widely used in petrochemical industry. more products: Tungsten-molybdenum extraction smelting resin (tungsten-molybdenum adsorption, purification Uranium extraction and separation resin (uranium adsorption, purification) Radioactive metal adsorption separation resin (element treatment of uranium, radium, thorium, thorium, etc.) Gallium extraction smelting resin (gallium adsorption, purification) Vanadium extraction smelting resin (vanadium adsorption, purification) Rare earth element extraction resin (rare earth element adsorption, purification) Special resin for gold extraction (primary gold mine, associated gold mine) Mercury removal special resin (mercury mine wastewater, mercury-containing waste comes out again) Precious metal recycled resin (gold, silver, platinum, palladium, rhodium, ruthenium, etc.) Except heavy metal resin (copper, zinc, nickel, chromium, lead, iron, manganese, etc.)
Arsenic selective ion exchange resin for drinking water, surface water and industrial waste water. The resin can be customized according to customers' requirements.
"Chromium removal ion exchange resin The ion exchange method for chromium removal has good practical performance, low cost, convenient operation, simple equipment, good water quality, stable performance, and easy recycling. The efficiency is high, and chromium and water can be recovered and reused. Compared with the traditional method, the amount of sludge is reduced by about 80%, and the discharge standard can be met. Jiangsu Kingshan New Material Co., Ltd. is a special ion exchange resin for chromium removal. It has high exchange capacity, strong regeneration capacity and good mechanical strength. It is widely used in the removal of chromium from wastewater."
Water is a daily necessity for the human body, as it replenishes water for the body. Under ideal circumstances, pure and safe drinking water can be consumed directly. However, as pollution becomes increasingly severe, including the discharge of some nuclear wastewater, many tap water cannot be directly consumed. No matter which channel you drink from, there is a great chance of contamination, which affects direct drinking. Radium pollution in drinking water is one of the dangerous pollutants, a radioactive element that can enter the water supply system and cause water pollution. The good thing is that this type of pollution can be removed, and high-quality PW981 material provides a comprehensive solution for radium pollution. If you need more information, you can login to our website
The resin adsorption method has outstanding advantages, mainly manifested in low environmental requirements, simple operation, high processing precision, and wide market application. Jiangsu Kingshan New Material Co., Ltd. has its own brand, Bestion. Its professional radium removal resin has the advantages of high selectivity, simple adsorption and elution regeneration, and reusability. It is suitable for the adsorption treatment of radium in various fields.
"radium removal resin The resin adsorption method has outstanding advantages, mainly manifested in low environmental requirements, simple operation, high processing precision, and wide market application. Jiangsu Kingshan New Materials Co., Ltd. has its own brand, Bestion. Its professional radium removal resin has the advantages of high selectivity, simple adsorption and elution regeneration, and reusability. It is suitable for the adsorption treatment of radium in various fields."
The resin adsorption method has outstanding advantages, mainly manifested in low environmental requirements, simple operation, high processing precision, and wide market application. Jiangsu Kingshan New Materials Co., Ltd. has its own brand, Bestion. Its professional radium removal resin has the advantages of high selectivity, simple adsorption and elution regeneration, and reusability. It is suitable for the adsorption treatment of radium in various fields.
"Calcium and Magnesium removal ion exchange resin from lithium solution Salt lake brine contains trace amounts of calcium and magnesium ions. In order to purify lithium solution, calcium and magnesium ions need to be removed. The removal of calcium and magnesium ions by ion exchange resin is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits."
Ion exchange resin Item 0017 h/na Quality capacity mmol/g 5.00/4.50 Volume capacity (mmol/ml) 1.75/1.90 moisture Content 51.00-56.00/45.00-50.00 Apparent density (wet)g/ml)0.73-0.83/0.77-0.87 True density (wet)g/ml1.170-1.220/1.250-1.290 Grain size (0.315 -1.250mm )95 (< 0.315mm ) 1.0 Effective grain diameter (mm )0.400-0.700 In 20l/25kg weaven bages
Bojietech has a range of products tailored for recovery of precious metals from electroplating solutions, leaching solutions and seawater. Ion exchange resins are commonly used to remove trace levels and to concentrate precious metals such as Uranium, Gold, Molybdenum, Rhenium, Nickel, Copper and other valuable metals. The metals are then recovered by various specialty regeneration techniques or by incinerating the resin. 25L/bag
"Calcium and Magnesium removal ion exchange resin from lithium solution Salt lake brine contains trace amounts of calcium and magnesium ions. In order to purify lithium solution, calcium and magnesium ions need to be removed. The removal of calcium and magnesium ions by ion exchange resin is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits."
"Ion Exchange Resin for Boron removal from Lithium Solution There are trace amounts of boron ions in salt lake brine. In order to purify lithium solution, it is necessary to remove boron ions. The removal of boron by ion exchange resin method is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits."
Gold extraction recovery resin In hydrometallurgy, there are many ways to separate and extract gold, among which ion exchange is one of the most important methods. Ion exchange and adsorption separation technology has been paid more and more attention because of its advantages of high separation efficiency, simple equipment and operation, renewable and reusable resin and adsorbent, and less environmental pollution. The gold recovery ion exchange resin produced by Jiangsu Kingshan New Material Co., Ltd. has the advantages of high mechanical strength, good selectivity and large exchange capacity, and is widely praised by customers.
"Fluorine Removal resin Drinking water with high fluoride content is the most fundamental and important factor leading to the prevalence of fluorosis. Ionic resin exchange method has been widely used for fluoride removal. Jiangsu Kingshan New Material Co., Ltd. provides special resin for fluorine removal with high mechanical strength, acid and alkali resistance, stable physical and chemical properties, simple regeneration, mild operating conditions, no secondary pollution to the environment, reusable, long service life, cost saving for enterprises, improve economic benefits."
"Rhodium adsorption resin The resin method is to use ion exchange resin to recover rhodium from waste catalysts, waste electrical components, and waste electroplating solutions. It has the advantages of high separation efficiency, simple operation and recyclable resin. The rhodium adsorption resin of Jiangsu Kingshan New Material Co., Ltd. has high selective affinity and adsorption rate, and is easy to regenerate and has high regeneration rate, and is widely used in industrial palladium metal recycling."
