OP/AL(20-30)/VC Width 700mm Thickness 20-30 micron ID of core 76mm Roll OD as customer's requirements
Specification: Width:
Product Specification & Packing Product Name Blister aluminum foil/Pharmacitical aluminum foil/PTP aluminum foil Alloy 8011 H state Width 600mm Thickness 20mic, 25mic, 30mic Construction (Unprinted) OP/ALU/VC; (Printed) OP/INK/ALU/INK/VC ID 76mm/152mm(3 inches/6 inches) ED 240mm Length 1500m(20mic) Weight 60g/(20mic); 20kg/roll(250*0.02mm) Density 2.7g/ Packing PE film/Foam gasket/plastic plug/carton/pallet Container load 20-25 tons in 20 GP container Product Performance And Characteristics 1 Primer (OP) is suitable for uvink, solvent ink, water based ink 2 Heat sealing lacquer (vc) is suitable for ALU ALU FOIL/PVC /PP/PS/PET 3 HSL 3-5g is suitable for Asian standards, 6-8g is suitable for European standards 4 Printing colors: 1-3 colors, double-sided printing, full bottom with single color printing 5 Water vapor transmission rate, national standard 0.5g/24h 6 Heat sealing strength 7.0N(PVC),6N(PVDC) Blister Aluminum Foil is a kind of coated aluminum foil, used for cover lidding foil in pharma industry. It provides excellent properties such as of anti-oxygen, moisture-proof, leak-proof, carry-home, anti-pollution, etc. Adopting hard anodized aluminum as cover material, blister foil is easy to break aluminum foil to take out the drugs by pushing the cover. Adopting heat-seal coating material, which cannot be stripped, PTP blister foil can be bonded with all kinds of plastic-based materials. PRODUCT USAGE Commenly heatsealed with PVC, PVDC, PP PET PE etc.
For paramedical and pharmaceutical producers, Blister Foil is used for medical purposes; it comes as an aluminum hard-tempered foil with heat-seal lacquers of PVC/PVDC applications. Request online quotation for Lidding Foils via our E-catalogue: We also manufacture strip foil and top web film.
PA 25-30 /AL(45-75)/VC Width 700mm Thickness 80-105 micron ID of core 76mm Roll OD as customer's requirements
1. Specification:Width:
Aluminum foils, incl chocolate foil, lidding foil, hairdressing foil, ptp blister foil, household foil.
Alu alu foil(clod forming foil), tropical blister foil, PTP foil.
Be uesd as packing for tablets, pills, capsules, and suppositories Easily tore-off:Can rip from all directions. Good gas & water obstruction and airtightness feature, extend medicine's storage period. 1. Materials such as Al foil, ink, sol and so on all come from excellent suppliers, so as to make sure product can confirm eligible animalcule and pinhole limit. 2. Production under strict rule. Sufficient heat sol on both protective layer and heat sealing layer, and then heat sealing proceed under regular process. 3. Perfect printing and exact overprint, no fading after sealing. 4. Various types: push-through style, peelable style (child-resistant). 20KG/Roll, with width no more than 600mm, 2 rolls/box, exportable package.
Ptp Blister Foil, Alu Alu Foil, Aluminum Sealing Foil And Liner Et.
Pharmaceutical packaging materials like alu alu bottom foil & PTP alu lid foil & tropical blister foil, cold forming foil, PTP blister foil (aluminum foil).Manufacturer
Pharmaceutical & food used packaging materials, such as PTP blister foil, alu alu foil, strip foil, tropical blister foil and composite film.
Product Specification & Packing Product Name alu alu foil/alu alu bottom foil/cold forming alu foil Alloy 8021-O Width 630mm Thickness 140-160mic Construction OPA/ALU/PVC ID 76mm/152mm(3 inches/6 inches) ED 280mm Length 360mtr(150mic)/330mtr (160mic) Weight 241g/(150mic)/281g/, 22kg(250mm width roll) Packing PE film/Foam gasket/plastic plug/carton/pallet Carton Size 290*290*(width+10)mm Container Load 20-25 tons in 20container PRODUCT FEATURES Alu Alu foil can accept printing, maximum 2 color printing. Mostly company logo and company name as the blister bubble will twist the word shapes so it is not suitable for multiple color printing. For the base color of alu alu foil, there are silver and gold. The bubble size is applicable for capsule size from 00# to 0#. PRODUCT PERFORMANCE - High barrier, easy to shape, no cracking, no delamination - 160mic thickness is suitable for double zero size and below blister - 150mic thickness is suitable for single zero size and below blister - Water vapor transmission rate, national standard 0.5g/24h - Gas transmission rate: national standard 0.524h0.1 V.S. our company data 0.02/24h0.1 Cold forming aluminum foil, or we can short as alu alu foil, is with good material features. The smooth surface and shinny color will enrich the packing of medicine inside. Also with good protection from oxygen and steam.
Be used for PAV\PP\PS hot seal, to hold tablets, capsules, suppositories, pills, etc. Aluminum composition, good obstruction performance, protect from light, moisture resistance, protect contents, extend quality period. Mechanic packing, high speed, high stability New and high class appearance, enhance medicine's impression and competition ability. Suitable for high-speed packing. Tropical aluminum foil (al-plastic-al) is a creative and improved approach for package of PVC blister: to seal laminates against PVC blister to bring tropical blister. It has good barrier performance. It can protect against vapor, oxygen, UV rays. And it is more economical than cold formed foil and superior compared with sachet packaging in spite of the same cost. Simultaneously, your enterprise information and trademark can be shown in the flat laminates to promote advertising. But there is disadvantage that as soon as the first tablet is taken out, the gap will weaken protection to each PVC blister. Therefore, the entire package has to be consumed according to time established by pharmaceutical supplier. 20Kg/Roll, 2 Rolls/Box, with width no more than 600mm, exportable package.
Transparent or Opaque PVC Film PVC is a plasticizer free, calendared rigid film. It is available in a wide range of colors and thickness. PVC offers a potent chemical resistance and optimized protection. It works best on standard blister packing machines.As a manufacturer, we provide blister pvc film specification customization for our customers. PRODUCT SPECIFICATION & PACKING Product Name PVC Film Performance Hard MAX Width PVC transparent made 1.6 meters, colored made 750mm PVDC is 1.2 meters transparent and 750mm colored Thickness 200-400um ID 76mm(3 inches) ED 300mm Length 233m/roll(thickness 250mic) Density 1.37g/cm3 Packing double PE bages/plastic plug/carton/pallet A container of 20 feet does not require 26 tons of pallets, and 20 tons of pallets are used. The weight limit of 25 tons for a 40 feet container is not economic PVC PRODUCT FEATURES Supreme clarity & transparency Excellent thickness control Marvelous formability (normal & deep-draw packages) Superior sealing Great impact strength Excellent shrinkage control Manufactured under controlled environment as per regulations Perfectly accurate slitting Disadvantages: non-degradable, not environmentally friendly, and not very well sealed Advantages: low price (compared to cold aluminum), good molding effect, high visibility Water vapor transmission rate: the test data is less than 1.4g/m224h Gas transmission rate: the test data is less than 10cm3/m224H 0.1MPa QUALITY ASSURANCE - 100k class cleaning work room to ensure a clean and hygienic production environment - Physics, chemistry, microbiological testing room and various testing instruments, testing according to the national standard YBB00242002-2015 - Passed China Food and Drug Administration (CFDA) registration and certification of pharmaceutical packaging materials and CDE filing - PVC/PE/PVDC polyvinyl chloride/polyethylene/polyvinylidene chloride solid medicinal composite rigid sheet B20180000111 - PVC/PVDC polyvinyl chloride/polyvinylidene chloride solid medicinal composite rigid sheet B20180000110 - PVC polyvinyl chloride solid medicinal hard film B20180000109 - Aclar/PVC polytrifluorochloroethylene/polyvinyl chloride solid medicinal composite rigid sheet B20200000317 - PA/Al/PVC polyamide/aluminum/polyvinyl chloride cold stamping forming solid medicinal composite rigid sheet B20200000318 - PVC/LDPE polyvinyl chloride/low density polyethylene solid medicinal composite rigid sheet B20190004351 - Passed the US FDA DMF product safety certification, number US FDA Type III: 033696 - ISO15378 GMP quality management system certificate: SSZ1807A1 - Passed SGS factory field certification
PTP blister foil, alu alu bottom foil, aluminum foil, cold forming blister foil, PVC/ PE, tropical blister foil, bearings, moly & tungsten products, pharma bottle,pharma machine.
Width 1000mm As customer's requirements
PA/AL/PVC as customer's requirements
PA25/AL60/PVC60 GSM 281g Width 700mm Thickness 140-160 micron ID of core 76mm Roll OD as customer's requirements
PA25/AL45/PVC60 GSM:240g Width 1000mm Thickness 140-160 micron ID of core 76mm Roll OD as customers requirements
