PTFE coated fiberglass fabrics with & without adhesives and in tickness varying from 0.08 to 0.90 mm. are available for various applications.
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
PTFE coated fiberglass fabric, adhesive tape, conveyor belt, tensile architecture membrane, oven liner, baking sheet, grill mat.
PTFE Adhesive Tapes PTFE Fiberglass Adhesive Tapes PTFE skived fim tape is another type of PTFE adhesive tapes, which is skived into even thin film from a cylindrical PTFE block. During the skiving, the block was fixed and rotate with a high speed, and the sharp blade will shave it into even thin film on a continuous basis. Product Description Color: Grey Popular Thickness: 0.13mm 0.18mm Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Process of PTFE skived film tapes manufacturing: Once the PTFE film has been skived from the PTFE(Teflon) block, it will be chemically treated or etched, which will remove the fluorine surface by creating a new sodium surface. Then the heat resistant adhesive will be allowed to bond PTFE film, resulting in PTFE Skived Tapes. Difference of PTFE skived film tapes: PTFE Skived film tape and self adhesive PTFE tape can both resist heat, has non stick surface and is chemical & UV resistant. But due to PTFE skived film is 100% Pure PTFE, so the property is different. The PTFE skived tapes is more thinner, usuall used for electronics industry, Application of PTFE skived film tapes: Its high elongation makes the tape useful in applications that require conformability. The combination of skived PTFE and silicone adhesive offers an effective solution in high temperature and high dielectric applications. Techbelts Skived PTFE tape provides superior wear resistance, low friction and a non-stick surface. Applications Areas of use include mechanical applications such as electrical insulation and cable wrapping, bellows and hose liners, gaskets, tank and vessel lining, slide bearings, skid ways, pipe support and bearing tape. They are also used in many other applications requiring high temperature resistance, low friction and a non stick surface. involved in the manufacture of PTFE coated fiberglass fabric, PTFE adhesive tapes, PTFE mesh conveyor belts, and silicone coated fabric etc, which provides a new solution for various industrial machines, such as packaging, printing, textile and dyeing industries.Click here to subscribe
Self Adhesive Tapes
BOPP Self Adhesive Tapes
Adhesive Tape
Anti-Static PTFE Fabric PTFE Fabric Manufacturers Product Description PTFE anti-static fabric are made with a specially formulated black PTFE coating. These fabrics eliminates static electricity during operation. Bocheng's PTFE anti-static fabrics are provided with a carbon loading giving non-conductive or anti-static properties to the material. Black in color, this type of product contains a proprietary static dissipation additive along with a woven fiberglass substrate for strength. Â Bocheng PTFE anti-static fabric has the highest thermal conductivity of the entire range of products. Anti-static Index Features of PTFE Anti-Static Fabric: 1. Anti-static 2. Excellent release characteristics 3. Low friction surface 4. Operational and dimensionally stable from to 5. Chemical resistant 6. Virtually no air flow under heat and pressure involved in the manufacture of PTFE coated fiberglass fabric, PTFE adhesive tapes, PTFE mesh conveyor belts, and silicone coated fabric etc, which provides a new solution for various industrial machines, such as packaging, printing, textile and dyeing industries.Click here to subscribe.
High Temperature Fiberglass Woven Tape PTFE coated fiberglass fabric takes high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. After unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of Teflon cloth is finally produced. PTFE Fabric Description Common thickness: 0.08mm 0.12mm 0.13mm 0.15mm 0.18mm 0.25mm 0.3mm We couls supply at most 1.5mm fabric. Common width: 1 meter or 1.25 meter For other width, customization is available as well. Features of PTFE Fabric: 1. High-temperature resistance(-100 to 550). 2. Non-sticky and easy to clean. 3. Food grade and nontoxic. 4. Heat resistance and fireproof. 5. Resistant to chemical corrosion, strong acid and alkali. 6. Good dimensional stability, high strength, and has good mechanical properties. 7. Low friction coefficient (0.05-0.1), the best choice for oil-free self-lubrication. 8. Light transmittance up to 6% 13 %. 9. High insulation property (the value of dielectric constant is only 2.6, and the value of tangent is less than 0.0025). 10. Anti-static and Ultraviolet-proof. Application of PTFE Fabric: 1. Packaging machines. 2. Bag making machines. 3. Heat print machines. 4. Somewhere else where the heat resistance and non-stick are needed.
PTFE teflon open mesh conveyor belt, PTFE teflon, conveyor belt, PTFE teflon coated fabric, PTFE teflon coated fiberglass fabric, PTFE teflon adhesive tape, PTFE teflon fusing machine belt.
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years. Main Specification (Customized size is acceptable.) 2mm thickness * 20mm width * 20mm roll length 2mm thickness * 30mm width *20mm roll length Main Color - black, grey, white Technical Data Product Series FOCUS-6200 Series Application Construction Industry Elongation - 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 25N/cm Tensile Strength 250KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages * Never hardening, maintain good waterproofing property with weathering resistance performance. * Excellent performance in waterproofing and sealing. * Good anti-aging performance effective life up to 20years. * Easy to apply. Applications * Provide waterproof and sealing protection forsteel structure construction. * Provide waterproof and sealing protection for door joints, window joints,roofs and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber. * Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Bopp self adhesive tape
Specification: We do shopping bags in various design and fabrics. Promotional, seasonal, Non-Woven, PP Woven, Laminated Non-Woven, Laminated PP Woven, cotton coated, PVC Bags, Canvas, Cotton, Polyester, Nylon, Jute bags, Sisal bags, leather bags, beach bags. Foldable bags, Paper bags, Wine bags, School bags, Tote Bags. Recycled, reuse bags. Silkscreen Printing, Offset printing, digital Printing, UV Printing etc. Keywords : Shopping bags various design and fabrics. Promotional, seasonal, Non-Woven, PP Woven, Laminated Non-Woven, Laminated PP Woven, cotton coated, PVC Bags, Canvas, Cotton, Polyester, Nylon,Jute bags, Sisal bags, leather bags. Foldable bags, Paper bags, Wine bags, School bags, Tote Bags, Beach Bags. Recycled, reuse bags. Silkscreen Printing, Offset printing, digital Printing, UV Printing.
Card yarns are created using the condenser tapes. They're utilized to divide the veil into stripes and carry those stripes to the rubber aprons so they can receive the necessary tension. These are frequently used for spinning wool. These tapes have a polyamide traction core with exceptional flexibility. Superior regulation is made possible by the flexibility for both endless and continuous tapes. The antibacterial properties of the elastic tape, along with its resistance to spinning oils and superior web division, are highly regarded. Additionally, these condenser tapes offer protection against chemical assaults.
Our polyester and polyamide spindle tapes have a long lifespan and are economical. Cleaning is no longer essential and productivity is maintained by preventing fibre collection. Additionally, our tapes offer uniform yarn quality and stable spindle speed. These are composed of nylon sandwiched between two outer layers of fabric. They have a long and dependable service life, no fibre fly accumulation, and the capacity to withstand spindle speeds beyond 20,000 rpm. These spindle tapes are designed for the economic application on spinning and twisting machines. Quality The spindle tapes we offer are constructed with layers of fabric intended for gripping and one hundred percent polyamide for strength. Our machine tapes' bottom layer is blended with fabric made of natural fibres, strengthening its capacity to absorb heat. Spindle Tapes come in a variety of hues, including green-green, and green-yellow.
black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality. black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.
PTFE adhesive tape with release sheet All VEIK PTFE tapes are manufactured by coating one side of our high quality teflon fabric with pressure sensitive silicone adhesive.These products are designed to withstand operational environments of up to 260 deg C(500F), and they can be used in direct contact with food. Our tapes come supplied with a convenient yellow release liner fro wasy installation. Features : All dimensions can be customized. 1. Non stick PTFE materials prevent the build up of molten film and plastic on its surface. 2. The temperature resistant PTFE coating allows high and low operating temperatures. 3. A yellow corrugated release liner is used on our PTFE tapes providing fast and easy removal. 4. Manufactured in varying thicknesses to cover a wide range of applications our PTFE tapes are of the highest quality available in today's market.
2-layer pressure-sensitive mechanical tape with a pre-combined hook system ensuring a good fastening of diapers.
Bopp self adhesive tapes, customized printing tapes, masking tapes and jumbo rolls, box strapping rolls hsn 20201011.
Request an online quotation for Adhesive Diaper Tapes via our website Adhesive diaper tapes are used as closure tapes for baby diapers. Suitable for application on Polyethylene (PE) and Biaxially Oriented Polypropylene (BOPP) landing zones, the 2-layer pressure-sensitive adhesive tape creates a strong bonding on diaper chassis. We also manufacture Mechanical Hook and Mini Hook Diaper Tapes.
