Psa Nitrogen Generator Suppliers and Manufacturers

Nitrogen Generator Introduction: The Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply and filling nitrogen cylinders. Our PSA Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. The patented vessel design enable our PSA Nitrogen Generator a lowest energy consumption and best efficiency. Nitrogen Generator specifications: 1. Nitrogen production capacity: 2~2000Nm3/h 2. Nitrogen purity: 90%, 99%, 99.5%, 99.9%, 99.99%, 99.999%, 99.9995%... 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Skid-mounted enable an easy installation and transportation. Nitrogen Generator Features: (1) The Nitrogen Generator is equipped with a stable Atlas Copco screw air compressor; (2) The Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Nitrogen Generator more reliable, and less maintenance jobs; (4) The Nitrogen Generator does not need foundation base; (5) The Nitrogen Generator does not need cooling water; (6) The Nitrogen Generator is skid-mounted, very easy to be transported and installed; (7) The Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (8) The Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (9) The Nitrogen Generator can be used for both onsite application and filling oxygen cylinders. (10) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.

Specifications: CBN Type PSA Nitrogen generator Flow: 5-3000Nm3/h Purity: 95%-99.999% Dew-point temperature: -40° C or -60 ° C Pressure: 0.1-0.8Mpa

-N2 flow:0-500ml/minute -Nitrogen purity:99.9995% -Output pressure:0-4bar -Input power: -

Psa (pressure swing adsorption) nitrogen generator Purity: 95%--99.9995% Oem manufacurer, rated flow: 3--6000nm3/h, customized Pressure: 0.8mpa & adjustable Dew point: =-45oc Resonable price with high quality, iso certificate, tuv certified. Principle Psa nitrogen making device to clean the air as raw material, carbon molecular sieve as adsorbent, by pressure swing adsorption principle in normal temperature down to obtain nitrogen equipment. According to the diffusion rate between the adsorption amount of oxygen, nitrogen in the air in the carbon molecular sieve and oxygen and nitrogen in carbon molecular sieve in different, by opening and closing the plc controal program control valve, to achieve pressure adsorption, vacuum desorption precess, oxygen, itrogen separation to get nitrogen purity desired. Characteristic * provide maximum business value * molecular sieve filling and compacting, adopt the professional way to complete in a professional context, higher density, higher efficiency * design optimization, process and structure of the system, to play the greatest potential, higher reliability * special valve by one million times, frequent switching fault free, and stable operation of security system * nitrogen can automatically record, easy to locate any work time , work state * system design more reasonable, more secure, more reliable. * automatic operation, the system, the whole process can be achieved unattended. Which nitrogen generator should i choose? Different parameters are essential for your choice of nitrogen generator • how big is your consumption? • is your consumption variable? • which pressure is required? • what purity/capacity is required? • do you already have a compressed air system? Why choose yangtian? *be your own supplier, customized. *mobile and flexible sloutions *produce gas when and where you want *save your installation cost *minimum maintence .Fully automatic operation *only quality compenents are used.

Introduction: Psa nitrogen making machine is a new type of air separate equipment, taking the compressed air as raw material, taking the carbon molecular sieve as the sorbent, and adopting the transformation adsorption technique to produce nitrogen. Under the normal temperature and high pressure environment, it uses the different diffusing speed of nitrogen and oxygen in the carbon molecular sieve, separating nitrogen and oxygen. And the purity of nitrogen and the output can be adjusted based on customerí»s requirements. Usage: 1íómetal heating treatment: nitrogen protection bright annealed, metal powder sintering nitrogen protection, gas carburizing quench, etc. 2íóchemical industryú¦mainly used for protection air, replacement air and washing air to ensure safety of production. 3íóelectron industryú¦used for producing electron part and protecting production line. 4íófood industryú¦using nitrogen protection storage vegetables, fruits, seeds and tea, etc. 5íómedical industryú¦packaging the nitrogen into medicine to storage and transportation. 6íóother industryú¦eg. The nitrogen protecting in the floats law glass production line. Main technical parameter and collocation Type:jtpsa-n Output:5í½1000nm3/h Pressure:0.6í½0.8mp Dew point after purified:-40í½-65íµ Purity:99.99%

Airgreat Nitrogen Generator with the PSA sophisticated machinery and technological innovation, providing low-cost and high-quality products of nitrogen gas. Nitrogen gas is the main component of air.Because it's difficult to react with other chemical substances, nitrogen gas is usually used as the protection gas in production, and is widely used in electronics, chemicals, coals, foodstuffs,pharmacies,magnetic materials, cables, metal processing, ports, transports, tires, thermoelectric, metallurgy, glass and other industries. 1130*750*2120mm 1000kg

PSA Nitrogen Generator

Psa nitrogen generation plant.

Cms specificaiton: 1. Cylindrical diameter: 1.0mm, 1.3mm, 1.5mm, 2.0mm. (also can produce according to requirement if volume is ok) 2. Appearance: black column 3. Diameter height ratio: 1:1.5~3 5. Crushing strength: > 100n/p min 6. Dust level: 99% 8. Packing: 20kg/40kg plastic drums 9. Bulk density: 660-700g/l 25kg plastic drum

Psa nitrogen generation advantages The gas seperation of psa takes such advantages as different gas has different adsorbing capacity in the cms under different pressure to separate gases. Psa nitrogen generators are designed based on the psa theory. They possess the properties of simple technology, low space requirement, quick start up, simple maintenance&operation, good applicability, high automation, low operation cost, low investment, etc. Main technical indicators: Non-standard packaging

Psa nitrogen generator, psa oxygen generator.

Oxygen Generator Introduction: The Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Generator consists of air compressor, air dryer, air filters, PSA oxygen generator, and related control system. The patented design enable our PSA Oxygen Generator a lowest energy consumption and best efficiency. Oxygen Generator specifications: 1. Oxygen Production capacity: 2~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Generator: ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW) STPO-4493+/-3%1-50.865.5-7.55.43 STPO-5593+/-3%1-51.175.5-7.57.60 STPO-8893+/-3%1-51.875.5-7.511.75 STPO-101093+/-3%1-52.335.5-7.515.75 STPO-151593+/-3%1-53.255.5-7.519.05 STPO-202093+/-3%1-54.305.5-7.531.59 STPO-252593+/-3%1-55.805.5-7.531.59 STPO-303093+/-3%1-57.005.5-7.539.04 STPO-353593+/-3%1-57.585.5-7.547.00 STPO-404093+/-3%1-59.305.5-7.557.70 STPO-454593+/-3%1-510.55.5-7.557.70 STPO-505093+/-3%1-510.65.5-7.557.70 STPO-606093+/-3%1-514.05.5-7.577.70 STPO-656593+/-3%1-515.25.5-7.592.70 STPO-707093+/-3%1-516.25.5-7.592.70 STPO-808093+/-3%1-518.75.5-7.5114.5 STPO-909093+/-3%1-520.05.5-7.5114.5 STPO-10010093+/-3%1-523.35.5-7.5137.0 STPO-16016093+/-3%1-537.45.5-7.5229.0 STPO-20020093+/-3%1-546.75.5-7.5274.0 Remark: Above standard model Oxygen Generator is based on an altitude of

Mobile Nitrogen Generator Introduction: The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply. ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand. Mobile Nitrogen Generator specifications: 1. Nitrogen production capacity: 10~600Nm3/h 2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%) 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Nitrogen Generator Features: (1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor; (2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs; (4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted; (5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.

Oxygen Plant Introduction: The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency. Oxygen Plant specifications: 1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Plant: Model Prod capacity (Nm3/h) O2 purity (%) Outlet pressure (bar) Compressed air Min. (m3/min) Working pressure (bar) Power consumption (KW) STPO-4 4 93+/-3% 1-5 0.86 5.5-7.5 5.43 STPO-5 5 93+/-3% 1-5 1.17 5.5-7.5 7.60 STPO-8 8 93+/-3% 1-5 1.87 5.5-7.5 11.75 STPO-10 10 93+/-3% 1-5 2.33 5.5-7.5 15.75 STPO-15 15 93+/-3% 1-5 3.25 5.5-7.5 19.05 STPO-20 20 93+/-3% 1-5 4.30 5.5-7.5 31.59 STPO-25 25 93+/-3% 1-5 5.80 5.5-7.5 31.59 STPO-30 30 93+/-3% 1-5 7.00 5.5-7.5 39.04 STPO-35 35 93+/-3% 1-5 7.58 5.5-7.5 47.00 STPO-40 40 93+/-3% 1-5 9.30 5.5-7.5 57.70 STPO-45 45 93+/-3% 1-5 10.5 5.5-7.5 57.70 STPO-50 50 93+/-3% 1-5 10.6 5.5-7.5 57.70 STPO-60 60 93+/-3% 1-5 14.0 5.5-7.5 77.70 STPO-65 65 93+/-3% 1-5 15.2 5.5-7.5 92.70 STPO-70 70 93+/-3% 1-5 16.2 5.5-7.5 92.70 STPO-80 80 93+/-3% 1-5 18.7 5.5-7.5 114.5 STPO-90 90 93+/-3% 1-5 20.0 5.5-7.5 114.5 STPO-100 100 93+/-3% 1-5 23.3 5.5-7.5 137.0 STPO-160 160 93+/-3% 1-5 37.4 5.5-7.5 229.0 STPO-200 200 93+/-3% 1-5 46.7 5.5-7.5 274.0 Remark: Above standard model Oxygen Plant is based on an altitude of

Mobile Nitrogen Generator Introduction: The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply. ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand. Mobile Nitrogen Generator specifications: 1. Nitrogen production capacity: 10~600Nm3/h 2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%) 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Nitrogen Generator Features: (1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor; (2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs; (4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted; (5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.

Psa oxygen generation plant psa nitrogen generation plant.Transportation and shipping

PSA N2 generation system 1. Operational Principle PSA nitrogen generation adopts carbon molecular sieve as adsorbent whose capacity of adsorbing the oxygen in air shall be larger more than of adsorbing the nitrogen in air. By means of valve opened and closed with PLC, two columns a&b can be shifted in circulation for pressured adsorption,de-pressured dis-adsorption in turn so as to separate the oxygen and nitrogen in air, thus a nitrogen gas with purity demanded can be made. 2. Typical application Nitrogen is used in short-circuit, large-scale integrated circuit, color and black & white picture tubes, parts of TV sets and recorders, semiconductors manufacturing, electrical equipments as well as laser drilling and other electrical components as protective atmosphere.

SMT Nitrogen Generator with high purity of N2 could be regulated between 99.99% to 99.999% to meet needs of SMT production.Energy conservation, the power consumption of nitrogen per cubic meter is about 0.42 degree. Low dew point of product=-45'C to ensure the quality of welding. Standard models, simple compatibility.Inthe reflow solding of SMT, nitrogen gas is charged into reflow furnace. The following advantages of soldering are listed in the nitrogen atmosphere:The quality of soldering is enhanced with the prevention of surface oxidation. The flux is guaranteed to the correct activation. The remnants of flux is lower. The surface of soldering is more artistic. 1130*750*2120MM 1000KG