Polynum Super: Thermal Reflective insulation 4.00mm thick consists of a polyethylene small air bubbles layer laminated with two aluminum reflective layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity areas, livestock buildings. Polynum SUPER applications: * Polynum Super allows insulation to be installed on an industrial roof, tiled roof, double brick walls, and inside gypsum walls, cement boards, and more. * Allows a solution as vapor barriers on flat roofs or as reflectors under underfloor heating and a unique solution for acoustic and thermal insulation under the flooring. * Polynum Super is suitable for application in both new construction and renovations, building improvement, and home restoration. Cost-Effective Energy Saving Safe to Handle Easy to Install
Polynum Big: Thermal Reflective insulation 8.00mm thick consists of a polyethylene bubbles layer laminated with two aluminum reflective layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity areas, livestock buildings. Polynum BIG Advantages: **** High Thermal resistance (R-value) **** Moisture-proof, fungus and mold-free **** High performance **** Does not attract nesting, rodents, birds, or pests. ****Does not collect dust, does not retain bacteria, odors nor dirt. **** Lightweight **** User-friendly No protective equipment such as gloves or breathing equipment is required for installation **** Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems. **** Eco Friendly Polynum Big Applications : Thermal insulation in industrialized roofs according to the existing construction Thermal insulation in tiled roofs combined with a dust barrier Thermal insulation in walls with two layers; gypsum finish, board cement, plasterboard, etc.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Polynum Ultra: Pure aluminum foil laminated with two layers of double polyethylene Big bubbles (8mm each layer, Fire Retardant) and internal reflection layer. The 16mm multi-foil/bubbles structure is laminated with two reflective aluminum layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our high resistance anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity, livestock buildings. Optional: 18 microns aluminum with bi-directional reinforced netting for extra strength. Polynum ULTRA Advantages: ***** HighThermal resistance (R-value 3.72) ***** Lightweight- therefore easy to apply * High performance * Moisture-proof, fungus, and mold-free ***** Does not attract nesting, rodents, birds, or pests* * Does not collect dust, does not retain bacteria, odors nor dirt. ***** Friendly User & Safe: No protective equipment such as gloves or breathing equipment is required for installation ****Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems. **** Cost Effective
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations. B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
Pig Iron for sale at high quantities from India. Payment Term - LC For price and specification. This Pig Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 300mm -1000mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 85 +/- 5% and P contents < 0.8% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container.
Factory Cheap Cash Register Paper Thermal Paper Roll All Sizes Thermal Paper Jumbo Roll For Pos. Weight: 48gsm, 55gsm, 60gsm, 65gsm, 70gsm Description : High bulk, good stiffness High brightness with less dust, well appearance Super white at least 3 years image life High density on color development, high clarity on printing Well strength, better ink absorption, could be processed after-printing Never stick on printhead, greatly extended the service life of printhead Using high quality raw materials, strictly quality control and keep stable quality
Code 95100AL: Innovative design improving fitness and filtration effectiveness Features 1. Innovative design improving fitness and filtration effectiveness 2. Protection from virus,bacteria and dust. 3. Patented anti-leak design. Folded and curved edges on cheeks provide super facial fit to prevent PM2.5 effectively. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven 5. Nose band: PE iron wire
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
XPS (Extruded Polystyrene) foam insulation boards are commonly available in 4x8-foot sheets. These sheets are used for various insulation applications in construction, such as insulating walls, roofs, and floors. XPS insulation is known for its closed-cell structure, which provides good thermal resistance and moisture resistance.
Calcium silicate is a white, crystalline compound with the chemical formula Ca2SiO4. It is primarily known for its role as a high-temperature insulating material with exceptional thermal stability. Calcium silicate insulation is widely used in industrial applications, such as in the construction of furnaces, kilns, and pipelines, where it can withstand extreme temperatures and provide effective thermal insulation. This material is also non-combustible and moisture-resistant, making it suitable for fireproofing and corrosion prevention. Calcium silicate's versatility, durability, and ability to handle intense heat have made it a vital component in a range of industries requiring reliable insulation and thermal protection.
Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³). The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.
1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Handmade and wirecut facing bricks ecotherm blocks (thermal insulating clay hollow blocks) brick cladding (brick tiles) clay pavers.Manufacturer and exporter
Asbestos is a mineral that is found in natural settings such as caves and outdoor deposits. For many years it was used as an important ingredient in a large number of products, primarily for the construction industry, but it also had other applications. One such use was to create a strong fiber that could endure high temperatures and even survive fire. This made it more valuable than other materials that were used to created fiber, such as cotton or jute. Fiber that was made out of asbestos was built to last and to endure under most any circumstances.Application: Break lining Thermal insulation products. Rubber products. Brake products. Electrical material. Textile industry. Construction industry.
Sunflower oil is made of sunflower seeds. Quality of the future oil significantly depends on the quality of seeds, level of oil content, humidity and maturation period. Unrefined sunflower oil is purified mechanically (settled and filtrated) in most cases. Unrefined oil contains maximum quantity of vitamins and phospholipids. Unrefined oil is rich of vitamins: (tocopherol), (linoleic and linolenic unsaturated fatty acids), (calcitriol), (retinol); it is also very healthy in raw form, for example as fresh salads dressing. Refined oil perfectly suits for frying and baking, it neither changes the taste and smell of products. FLEXITANK Flexitank is a flexible container which is used for the transportation and storage of liquid food, loose and bulk cargoes. Transportation is carried out by the 20 ft dry cargo container, resulting in savings, since only the delivery costs are paid. TANK-CONTAINER The tank-container is a container consisting of a frame and a tank of 26 - 35 m. BARREL AND MULTIBOX The multibox is a plastic container, intended for transportation and storage of safe liquids. TANK Our tank vehicles of the European production are made of special food stainless steel. All the tanks have thermal insulation that allows maintaining the desired temperature, and if necessary, you may heat or cool the argo during transportation.
As a general rule, The purer the sand, the clearer the products Silicon and oxygen are the earth's two most abundant elements and together they make silica, one of the earths three most common rock forming minerals. Akshar Minerals Silica sand is high purity natural crystalline silica. It is inherently bright, white, low in moisture and chemically inert in nature. Basically, It is made up of two main element Silica & Oxygen. Silica sand is made up of Silicon Dioxide. There are number of different uses of silica sand in the industrial and commercial sector, from golf courses to glass making . The chemical formula of Silica Sand is SiO2 Characteristics : High Purity Weather Resistant White Appearance Naturally Hard Controlled Particle size Chemically Inert Applications Akshar Minerals Silica sand is used depends on physical, chemical and mechanical characteristics such as grain size, shape color, structure and distribution as well as refractoriness strength and stability. There characteristics can differ depending on how mineral is processed after it is mined. This product gets easily mixed and can be used for high temperature applications like flat glass, furnace tubes and many more due to its excellent thermal expansion, hardness. It yields improved durability and burnish resistance. We make for all type of application in the industries like Glass industries, Sodium Silicate Industry, Golf course & Sport Ground, Adhesive and sealant, Rubber industry, Texture Wall Paint, Sand Blasting, Agro pesticide, Cosmetic industry, Soap & Detergent, Filtration Media, Power Plant & Petroleum, Construction Chemical Industry, Plastic, Fertilizer, Paint, Ceramic, Insulation, Foundry, Ramming Mass, Steel Industry, Landscaping, GRC & GRP Industry, Oil & Petroleum Industry, Oil Exploration & Oil Drilling.
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
