Plastic Products Rubber Products Suppliers and Manufacturers

VN Rubber Factory is producer and direct exporter of Vietnamese natural rubber, rubber wood. Our products are faithful quality, most reasonable cost with good service, free of extra fees, regular delivery, best after-sale service, cheap and safe.

We are the leading manufacturers of Antivibration Machine Rubber Pads & Industrial Rubber Products and Parts

Introduction: JERINA Plasticizer A is mixture of selected high molecular weight saturated fatty acid zinc salt. Technical Specification: Appearance: Yellow granule Melting point deg.: 100.0-104.0 Ash content (850degX2h),%: 12.0-14.0 Zinc content %: 12.0-14.0 Iodine value, g/100g: 40.0-50.0 Performance: 1. JERINA Plasticizer A can reduce the viscosity of natural and synthetic rubber to making it easy to process. 2. JERINA Plasticizer A can improve the dispersion of filler and rubber chemicals in the rubber compound, and improve scorch safety. It also can promote vulcanization and release of vulcanized products to keep the mold clean. 3. JERINA Plasticizer A canshorten the mixing time, change flowability of unvulcanized rubber, and there is no adverse effect on the bonding of rubber and metal material. It can improve storage stability of rubber compound, especially beneficial for vulcanization process. 4. JERINA Plasticizer A also can improve compression set performance when applied in sealing strip of EPDM. Application: 1. Add plasticizer A together with rubber compound. 2. Plasticizer A is applicable to NR, SBR, NBR, EPDM etc. 3. Suggested ratio: 1-5phr Packing and Storage: 1. It is packed in Kraft paper bags lined with plastic film, net weight is 25kg/bag. 2. It should be stored in a cool, dry warehouse. 3. The shelf life is 24 months.

Plastic And Rubber Materials

Any sorts of plastic and rubber molded or extruded products

Ldpe-hdpe and other various plastic and rubber scraps available.

PP- Rafia we are offering a wide range of industrial fabrics that have diverse industrial applications.

Rubber & plastic handle grip Packing in carton

In house tool and die design has proven to be an extremely economical means of getting your parts to production. Whenever possible UNIPOLY Rubber & Plastic uses our in house tool and die design team to build your mold or modify one of our current molds, which translates into better quality control and immediate time and money savings for our customer.

Rubber/Plastic Gasket Brief Description Used for cushioning and vibration control. Material available in rubber, plastic, and other custom compound. Customized washer is welcome Rubber/Plastic Washer Detailed Description For cushioning and vibration control Provide a wide ranges sizes and shapes Material: EPDM, NR, NRB, SBR, FKM, CR, thermoplastic and other custom compound

Shanghai Kuhoo Polymers Co., Ltd (TPE TPR TPV) TPE, TPR(Thermoplastic Elastomer or thermoplastic rubber) Is a kind of high elasticity, high strength, high elasticity rubber, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately. Injection, extrusion, blow molding, overmolding are all suitable. Thermoplastic elastomer has thermoplastic processing performance, but also has the physical properties of vulcanized rubber. It can be described as a combination of advantages of plastic and rubber. TPV (thermoplastic vulcanizate) is also known as elastomeric alloys (EA). TPVs are formed in a reactive compounding process that is usually the combination of a polyolefin (Polypropylene or Polyethylene) with an elastomer (SBR, NR, EPDM, NBR or Butyl). In a reactive compounding process, the elastomer is completely cured. This dynamic vulcanization process in TPV production generates the webbed network in the elastomer domain while still retaining melt- processing capabilities. TPV consists of micron size cross-linked elastomer particles dispersed throughout a continuous matrix of thermoplastic material. Because of its thermoplasticity and melt flowability, TPV can be processed on standard thermoplastic equipments (such as injection molding, extrusion, blow molding, calendaring, overmolding etc.) with the efficiency and economy associated with thermoplastic materials. Further, the scrap from these processes can be recycled. REACH & RoHS test reports available OEM is welcome. We provide only quality products. Features of KUHOO TPE raw material, tpe material, TPE compound, TPE granule, TPE resin, TPE pellet or thermoplastic rubber or Thermoplastic Elastomer: 1. Wide range of hardness; 2. Non-sticky, 3. Easy to process and color; 4. Overmolding to PA,PP, PE, ABS; 5. Superior Resilience; 6. Excellent brittle temperature; 7. Environmental-friendly; 100% recyclable; REACH RoHS compliance; 8. Low odor and fogging; 9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion. 10. Excellent UV and aging resistance

Cold Shot Nitrogen Deburring Machine Introduction Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method. Application O - rings, gaskets and other rubber sealings Insulators and other electric / electronic components Valve stems, washers and fittings Short tubes and flexible boots Rubber absorbers and bumpers for automobile Face masks & goggles Mobile phone housing and intelligent watch strap Zinc and mag alloys like door lockers for auto cars SPECIFICATIONS NS - 120C Size: L1400mm * W1300mm * H2300mm Weight: 1500kg Power Supply: AC380V 50HZ Electrical Capacity: 8KW * 3PH Design Temp: - 130Deg. C Design Pressure: 0.5 - 0.7 Mpa Outer Wall Material: SUS Frame Material: 100% SUS304 Barrel Capacity: 120L Wheel Speed: 6, 000 rpm Max Barrel Speed: 0 - 16rpm Media Throw wheel Size : 350 Operation Mode: Press Button

Group companies supporting plastic product factory at present main products of rubber, plastic products six series one thousand DuoGe varieties. The main products for Mr Fukuda car company, giving the car factory's factories, huairou CheLiangChang bell, ou V bus factory, Europe, heavy card, changsha car factory, Mr Fukuda heavy industry, five even five signs, condition of China close, shengyang jinbei, chery automobile and so on several host manufacturers. The existing advanced technology center, the comprehensive laboratory one place, and professional engineers, designers, quality formula engineer, DuoRen 30. Has a certain scale, the database for the development of the product innovation to lay a good foundation, raw materials, semi-finished products analysis, analysis product test facilities, to form the raw materials, semi-finished products, finished product quality of the important link of specific guidance and monitoring. Qc Center Technology center has investment of more than 300 physical measure the room, a formula engineer, quality engineer to 30 DuoRen, polymer, dr professional two NVH experts two people. Vibration and noise tester (COCO 90 high-performance data records and dynamic signal analyzer), able to test, real-time vibration noise spectrum analysis, transient waveform capture, high speed data record, structure modal analysis. Air intake system filtering and flow testing equipment. For raw materials, semi-finished products, finished products strict testing. Built of certain scale database. In 2008, the company passed the ISO/TS16949:2002 international quality system authentication and strictly according to the system requirements. R&d Center Research and development center of commercial vehicle on international high-end technology development trend, the introduction, absorption, and create new products on the market, to win. In the r&d center of the efforts of the staff, there have been more than 30 product been granted the national patent. And in NVH each of main research institute, the domestic professional institutes, wide communication and cooperation and participate in the design of whole DuoGe models. One of the independent research and development of composite cab soft mat, China southern university, the test in isolation than traditional cab of soft mat vibration rate cut by half, the noise is also reduced. Now Mr Fukuda, five car has been for light trucks batch used. According to the commercial vehicle lightweight, cost reduction, reduce the intake resistance, improve fuel economy, the use of human nature, independent research and development over the right for the lock institutions. Right steering-wheel locks check than the left for the lock's advantage is

TIPLAS is a professional mold manufacturer in Shenzhen China,which specializes in Design Engineering;Mold Making;Injection Molding & Production;Precision Machining with a team of experienced mold designers and skilled workers,also strictly commited to DME,Hasco mold standards. mold building plastic injection in china,china mold supplier shenzhen,china mold design company,plastic injection molding & production,precision mold plastic injection,plastic mold injection,injection mold plastic shenzhen china,plastic injection mold shenzhen china factory,die casting mold shenzhen china factory,plastic molded parts shenzhen china,precision mold inserts,precision machining,two-shot mold making,overmold making,compression mold,etc.

Emmanuel Exports - Manufacturer of pre ink rubber stamp handle, stamp polymer & plastic rubber stamp handle in Madurai, Tamilnadu

Rubber stamp plastic holder

Crumb rubber plastic and cardboard bales