The small plasma sputtering and evaporation two-in-one coating machine is equipped with DC sputtering target and thermal evaporation assembly, which can not only be used for metal film plating by plasma sputtering, but also obtain carbon or other metal elemental films by evaporation. The instrument components are highly integrated, which realize two kinds of coating functions in the same chamber. This coating machine adopts high purity quartz chamber as vacuum chamber, and the coating process is completely visible. The instrument is equipped with two stage rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa, and can meet the vacuum environment required by most evaporation coating experiments and diode sputtering experiments. This instrument has small size which can save space and can be used on the test bench. One machine has multiple purposes, which is cost-effective and very suitable for major universities and research institutions to choose. Small two-in-one coating machine applications: Scanning electron microscope sample surface gold spraying, gold steaming carbon spraying and other operations, as well as the production of non-conductor material test electrode.
The magnetron sputtering/vacuum evaporation composite coating equipment combines magnetron sputtering technology and vacuum evaporation technology in one coating equipment. In this device, magnetron sputtering cathode glow discharge is used to sputter the target atoms and partially ionize and deposit them on the substrate to form a film, and at the same time, the metal plating material can be melted in a vacuum by resistance heating and vaporized and then deposited on the substrate to form a film. This increases the utility and flexibility of the device. The equipment is used for metallization of plastic surface such as mobile phone case and deposition of non-conductive film and electromagnetic shielding film. The magnetron sputtering/vacuum evaporation composite coating equipment is equipped with a plasma processing device, a high-efficiency magnetron sputtering cathode and a resistance evaporation device, etc. The deposition rate of this device is fast, the coating adhesion is good, the plating layer is fine and compact, the surface finish is high, the uniformity and consistency is good; the machine realizes full automatic control of coating process, large load, reliable work, high qualification rate, low production cost and green environmental protection. The device is widely used in computer casings, mobile phone cases, household appliances and other industries, and can be coated with metal film, alloy film, composite film layer, transparent (translucent) film, non-conductive film, electromagnetic shielding film and the like.
Magnetron sputtering coaters http://www.pvd-metallizer.com Magnetron sputtering vacuum coater is an updated sputtering coating technique with advantages of high sputtering speed, lower temperature, stable performance and simple manipulation, etc. By this equipment, the metallic film, iridescent film, golden film can be coated with sputtering evaporation on the metals, pre-treated plastic, glass, mica and ceramic products. Just using different targets with reactive gas inflation can realize different films.
Magnetron sputtering web coater http://www.pvd-metallizer.com High vacuum web coater is specially designed equipment for coating aluminium films or oxidant compound films or other metallic films on rolls of any polyester membranes. It can be also equipped with both wire-feeding system, MF melting pot, DC or MF sputtering metallization function as per customers specific requirements to realize certain coating purposes.
Magnetron sputtering coaters Magnetron sputtering vacuum coater is an updated sputtering coating technique with advantages of high sputtering speed, lower temperature, stable performance and simple manipulation, etc. By this equipment, the metallic film, iridescent film, golden film can be coated with sputtering evaporation on the metals, pre-treated plastic, glass, mica and ceramic products. Just using different targets with reactive gas inflation can realize different films. It can be also installed with plane movable targets or central fixed targets for different purposes. The vacuum chamber with double-doors structure makes the coating and substrates loading more efficient and the productivity is highly raised.
Evaporation vacuum coaters Thermal evaporation vacuum coater is operated by the priciple of vaporizing materials (usually al or cr, sio, sio2) with resistance heating so that it can be deposited on the surfaces of pre-treated plastic, ceramics in form of thin film under the vacuum condition so as to obtain bright and good-looking plastic or ceramic products with moderate price. Its double doors structure enables the operation of work piece feeding-discharge and coating simultaneously. So the work efficiency is highly elevated. We will design the machine under the customer's request.
Sputter coater for car hubcap metalizing http://www.pvd-metallizer.com High vacuum magnetron sputtering coater is specially designed for automobile & motorcycle hubcap coating or metallizing with unique features and special structure designed, enabling to meet the needs of all the technical demands. Equipped with cryo-pump (Poly-Cold), it can realize very high coating efficiency. With specially designed cathodes structure to realize sputtering high ratio, it can accomplish each coating cycle within 8~12 minutes under computer & PLC control. The substrate rack driving system with both revolution and rotation functions plus substrate self-rotation, is able to ensure the coating evenness and uniformity.
Double target magnetron sputtering coater is a small laboratory coater with two targets developed by our company. It can be used to prepare single or multi-layer ferroelectric film, conductive film, alloy film, semiconductor film, ceramic film, dielectric film, optical film, etc. Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy, high speed, high coating rate and low sample temperature rise, which is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled inter layer, the water cooler can effectively take away heat, avoid heat gathering on the target surface, and make the magnetron coating work stably for a long time. In addition, the device is also equipped with bias power supply, which can add bias electric field between the target and the sample platform, enhance the energy of ions, improve the film quality and adhesion of the film. The whole machine adopts touch screen control, one key coating procedure, simple operation, and is an ideal equipment for preparing thin film in the laboratory.
Three target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated. The device is equipped with 500W DC power supply and 500W RF power supply. The DC power supply can be used for the preparation of metal film, and the RF power supply can be used for the preparation of non-metal films. The three targets can meet the needs of multi-layer or multiple coatings. If customers have other coating needs, DC power supply and pulse power supply can be customized. Various types of power supply are available from 300W to 1000W in various specifications. The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 10E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency. This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, this three-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory.
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330�ºC. HPMA has obvious threshold effect under high temperature (350�ºC) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300�ºC with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.
ITEM DESCRIPTION Substrate Size ~ 8inch Deposition Direction Upward Thermal Source ~ 10V, 300A Thickness Uniformity ± 3% Heating Uniformity ± 3% Full Automation Control.
Three targets DC magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated. The device is equipped with 500W DC power supply. The DC power supply can be used for the preparation of metal film. The three targets can meet the needs of multi-layer or multiple coatings. If customers have other coating needs, DC power supply and pulse power supply can be customized. Various types of power supply are available from 300W to 1000W in various specifications. The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.
The dual-target magnetron sputtering coating instrument is a small laboratory coating instrument with two targets developed by our company, which can be used to prepare single-layer or multi-layer ferroelectric thin films, conductive thin films, alloy thin films, semiconductor thin films, ceramic thin films , Dielectric film, optical film, etc. Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy and high speed. The coating rate is high and the sample temperature rise is low. It is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled interlayer. The water chiller can effectively take away the heat, avoid heat accumulation on the target surface, and make the magnetron coating work stably for a long time. Compared with similar equipment, this dual target magnetron sputtering coating instrument is not only widely used, but also small in size and easy to operate, it is an ideal equipment for preparing thin films in the laboratory.
* ASTM Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on. Product Name : ASTM Aluminum coil Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications Thickness 0.1-10mm, width 600-1500,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bendingï¼?Stamping,Embossing Application : Roof , car building,curtain wall, Shelter ,oil tank,mould Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : : T/T ,LC Exporting country : Southeast Asia: Philippines, Vietnam, Laos Northern Europe: Finland, Sweden, Norway, Iceland South Africa: Zambia, Angola, Zimbabwe Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* JIS Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on. Product Name : JIS Aluminum coil Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications : Thickness 0.1-10mm, width 600-1500,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bendingï¼?Stamping,Embossing Application : Roof , car building,curtain wall, Shelter ,oil tank,mould Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Southeast Asia: Philippines, Vietnam, Laos Northern Europe: Finland, Sweden, Norway, Iceland South Africa: Zambia, Angola, Zimbabwe Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Aluminum coil is a kind of metal plate, melted by aluminum ingots, plus different alloys, through casting or rolling or hot rolling, cold rolling, annealing, transverse shear and other processes into aluminum coil, aluminum coil has low density, light weight, easy to handle, can be strengthened, plasticity, good thermal conductivity. So widely used in power plant and chemical plant pipeline insulation, heat exchanger, evaporator, heating appliances, cooking utensils and so on. Product Name : Aluminum coil Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications Thickness 0.1-10mm, width 600-1500,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTMB209 JIS H4000 EN573 GB/T3880 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. Product : certification ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bending, Stamping,Embossing Application : Roof , car building,curtain wall, Shelter ,oil tank,mould Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Southeast Asia: Philippines, Vietnam, Laos Northern Europe: Finland, Sweden, Norway, Iceland South Africa: Zambia, Angola, Zimbabwe Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. The Incoloy825 has the following functions: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion Good oxidation resistance and non oxidative thermal acidity. It has good mechanical properties at room temperature and high temperature up to 550 Certification of pressure vessels with manufacturing temperatures up to 450 C Incoloy 825 metallographic structure: Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization. Incoloy825 Corrosion resistance: Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550. Typical applications include: Heating pipes, containers, baskets and chains for sulfuric acid pickling plants. Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline. Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production. Air heat exchanger in petroleum refining Food Engineering chemical process Flame retardant alloy for high-pressure oxygen Product name INCOLOY Alloy 825 Grade INCOLOY Alloy 825 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade Cu Ti AI P C Ni Cr Mo INCOLOY Alloy 825 2 0.8 0.1 - 0.02 42 21 3
Thermal evaporation metallizer HTTP://WWW.PVD-METALLIZER.COM Vacuum evaporation coating machine is mainly used in coating on the surface of pretreated plastic and ceramic products with metal films (such as aluminum, chrome, stainless steel and other metals), colorful film and imitation gold film etc., as a result. it can obtain bright, beautiful and inexpensive plastic and ceramic metalized products. The machine is extensively used in the industries of lamps, furniture, toys, bottle caps, female shoe heels, car mirrors, crafts, jewelry, watches, cell phones, DVD, MP3, PDA outer coverings, cosmetic shells and Christmas gifts etc. The coating substrates include ABS, PS, PP, PC, PVC, nylon, metal, glass, ceramics and TPU materials, etc. Double Door Vertical Type Thermal Evaporation metallizer is operated by the principle of thermal evaporation by resistance heating that can be used for coating metallic films and gold-imitative films on the pre-treated plastics, ceramics and others in order to obtain bright and good-looking results with lower cost.
This equipment is a multi-source high-vacuum evaporation coating instrument. The equipment adopts a front-opening vacuum chamber design. The chamber has a large space and strong expandability, which can meet the evaporation coating of multiple types of large-size samples. The chamber has an upper sample stage inside, and the clamping or clamping type sample mounting parts can be selected according to the user's sample style. The sample table can be rotated, heated and raised and lowered, and all operations are integrated and controlled through the touch screen. The vacuum pump set of the equipment is a two-stage vacuum system, which is composed of a dual stage rotary vane vacuum pump and a turbo molecular pump. It can provide a clean and oil-free high vacuum environment for the vacuum coating test; the vacuum system contains a complete pneumatic valve system, and the user can One-touch operation through the touch screen realizes vacuuming, non-stop load and unload sample, complete shutdown and other operations. The equipment has two sets of evaporation sources. It adopts a tungsten boat evaporation source and water-cooled copper electrodes. It can support a maximum current of 300A and a heating temperature of up to 3000â??. It can realize the evaporation of various refractory metals. This equipment adopts an integrated design, and the chamber and the electric control part are separated left and right, which realizes the separation of water and electricity, and effectively guarantees the safety of users. The electric control part adopts the design of the combination of touch screen and button panel. The vacuum system, sample table and other auxiliary functions are operated by the touch screen with one button. The evaporation and the film thickness control are operated independently by the panel, which is as convenient for users as possible while avoiding the possibility of wrong operation. The equipment is well-designed and has excellent performance, and it is an indispensable choice for laboratory high-precision evaporation coating test.
LED, LCD, projector, handycam and medical products like thermal paper, scanner printer and hospital surgical items.
