Plano Convex Cylindrical Lens Suppliers and Manufacturers

Cylindrical lenses are either plano-convex or plano-concave in form and rectangular in shape. These lenses are used in applications requiring magnification only, such as in transforming a point image into a line image or changing the height of an image without changing its width or vice versa. Therefore serves a variety application, such as slit line detector array illumination, bar code scanning, holography, optical information processing and computer, laser projection. Capability Material: optical glass, fused silic Dimension: 1 - 500mm Dimension tolerance: + / - 0.02mm Centration: 3 arc minutes Wedge: < 5 mrad Surface quality: up to 10-5 Surface accuracy: x -4 Clear aperture: > 90% Coating: according to the requirement

Plano-Convex Cylindrical lenses have a positive focal length, which makes them ideal for collecting and focusing light for many imaging applications Specifiction of our cylinderical lens as follow: * Material BK7 or other optical materials * Dimension Tolerance +0.0~-0.1mm * Center Thickness +/-0.1mm * Focal Length Tolerance+/-1% * Surface Quality:20/10 * Surface Figure /2 at 633nm on plano side * Clear Aperture >90% * Chamfer 0.25mm at 45 degree typical * Coating Optional.

Optical Cylindrical lens Optical Glass Plano Convex Cylindrical Lens A Optical glass Cylinder Lenses is used to condense light in one axis.  A positive cylindrical lens is able to create a line image from a point of light, to change the aspect ratio of an image or to focus collimated input light to a line. Plano- convex cylindrical lenses are typically used for illumination of slit and line detector arrays, laser projection, laser line focussing and anamorphic beam shaping. Specification MaterialOptical glass/ Fused silica/ sapphire   etc. Dimension2mm~300mm Dimension   tolerance±0.05mm~±0.1mm Centre   Thickness2mm~20mm Surface   quality60/40 40/20 20/10 Surface   accuracy /10@632.8nm532nm Clear   Aperture>85% dig diameter Centration

Optical Cylindrical lens Optical Glass Plano Convex Cylindrical Lens A Optical glass Cylinder Lenses is used to condense light in one axis.  A positive cylindrical lens is able to create a line image from a point of light, to change the aspect ratio of an image or to focus collimated input light to a line. Plano- convex cylindrical lenses are typically used for illumination of slit and line detector arrays, laser projection, laser line focussing and anamorphic beam shaping. Specification Material Optical glass/ Fused silica/ sapphire   etc. Dimension 2mm~300mm Dimension   tolerance ±0.05mm~±0.1mm Centre   Thickness 2mm~20mm Surface   quality 60/40ï¼? 40/20ï¼? 20/10 Surface   accuracy λ/2~λ/10@632.8nmï¼?532nm Clear   Aperture >85% dig diameter Centration

Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses ar manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.

Hanzhong Brisun Optics Co., Ltd. Is the high High precision optical element manufacturer provides customized production of Various optical lenses, including spherical lens, cylindrical lens, optical window, mirror, prism, filter, metal base mirror and other high-precision optical elements. The base materials include various optical glass, fused quartz, calcium fluoride (CaF2), zinc selenide (ZnSe), germanium (GE), silicon (SI), sapphire, metal and other materials. And provide antireflective film, high reflection film, spectroscopic film, metal film and other optical coatings. The plane convex cylindrical lens will focus the incident light on the line with positive focal length. It is composed of a plane and a convex cylinder. It is often used to focus parallel or divergent beams on the line or change the aspect ratio of the image. The flat concave cylindrical lens is composed of a plane and a concave cylinder, and its focal length is negative. It is often used to focus parallel or divergent beams on the line or change the aspect ratio of the image. Borisun optics provides cylindrical lenses without coating and coated with antireflection film. Antireflective film options include UV, VIS, NIR, and SWIR. Germanium, silicon or zinc selenide substrates are suitable for infrared applications, while fused quartz is suitable for ultraviolet applications. Technical parameters: Material: optical glass, H-K9L (N-BK7) Radius of curvature: ± 1mm - ± 50000mm ± 1% Outer circle: 3mm-500mm ± 0.1mm Center thickness tolerance: ± 0.05mm (we can process to ± 0.01mm with high precision) Center deviation: 3²(we can process to 30 ³with high precision) Surface accuracy: / 8 (high precision, we can process to 1 / 10�») Surface quality: 60/40 (we can process to 10-5 with high precision) Effective caliber: 90% Coating: according to the customer requirements In addition, we have thousands of kinds of stock, such as quartz plano convex lens, quartz plano concave lens, quartz biconvex lens, quartz biconvex lens, cylindrical lens, prism, filters, windows, beamsplitter and so on. The price is preferential and the quality is excellent, which can meet your demand for a small order. If you are interested it, welcome to inquiry us or search "Hanzhong Borisun Optics Co.,Ltd "to know about more details.

Plano Convex or Concave Square Cylindrical Cylinder Lens Cylinder Lenses are offered in both plano-concave and plano-convex configurations, they are typically used to focus incoming light to a line, or to change the aspect ratio of an image. Cylinder Lenses are available with positive or negative focal lengths, they are used for the optics, lasers, medical science, electronics, tele-communication and others. 1. Cylindrical lens with its circumference surface polished. 2. Applicable for laser focusing into a line, changing beam shape into sheet-shape, or irradiating at a distance with elongated line 3. Focal length shortened by reducing the rod lense diameter compared to cylindrical lenses 4. Distortion-free, flexion-free, straight line gainable when projection was made at a distance, by precised process and polishing. 5. Suitable for collecting large sum of light into sensor by putting it right in front of line sensor

Prism Our istandardfª product line includes cylindrical lenses, lenses, plano-convex cylindrical lenses, plano-concave cylindrical lenses, spherical lenses, aspheric lenses, prism, filter, achromatic lenses and reflector etc. Customers inquiries always meet with our careful attention.

Cylindrical lens Material: flint glasses, UV-fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si, etc. Focal length:í+5mm-- í+1000mmí+1% (test by TIROPTICS OPTOMATIC2000 made in German) Length: 2mm-3mm í+0.1mm Width: 2mm-150mmí+0.1mm Tc tolerance:í+0.2mm Centration: 3-5' Surface accuracy: ª-/2 Surface quality: 40/20 Clear aperture: 90% Coating: custom design

Cylindrical Lens Cylindrical lens is used to provide focusing power in one section only. For illumination or detection of light from line sources. Also used to anamorphic compression of beams and images. Especially widely used to anamorphic compression of LD (laser diode) output beam. Our cylindrical lens include fused silica cylindrical lens, CaF2 cylindrical lens, ZnSe cylindrical lens, ZnS cylindrical lens. Capacity: Material: Optical glass, Fused silica,CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure:/10 Centration: 1 minute or 30 Second Coating: Uncoated, AR and HR Specification: MaterialBK7 or Fused Silica Design Wavelength632.8nm Design Index: BK7n=1.5147 0.0005 Fused Silican=1.457020.00005 Surface Figurex: /2; y: 2 Diameter Tolerance+0.00, -0.15 mm ThicknessTolerance0.2mm Paraxial Focal Length2% Centration85% Surface Quality60-40 scratch and dig Protective Bevel0.25 mm x 45 BK7 Plano-Convex Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TXC10110.0x10.012.76.544.32.09.8 TXC10220.0x10.012.76.544.32.09.8 TXC10310.0x10.020.010.293.32.017.8 TXC10420.0x10.020.010.293.32.017.8 TXC10510.0x10.025.012.873.02.023.0 TXC10620.0x10.025.012.873.02.023.0 Note: Other size,material and coatings are available upon request. BK7 Plano-Concave Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TEC20110.0x10.0-12.76.544.32.0-14 TEC20220.0x10.0-12.76.544.32.0-14 TEC20310.0x10.0-25.012.873.02.0-26.3 TEC20420.0x10.0-25.012.873.02.0-26.3 Note: Other size,material and coatings are available upon request.

Sunday Optics Manufacture Cylindrical lens,plano convex lens, plano concave lens, achromatic lens, mensicus lens. Material:bk7 JGS1 Caf2 Sapphire Size:0.1-600mm Surface quality:10/5 Flatness:1/10lambda AR BBAR Coating is on request. zygo test report RHS CE.

The demision of cylindrical lens as follow: We will also do according to the specifications such as size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package

According to your request we will try our best work for your company. Our fªstandardfª product line includes cylindrical lenses, lenses, plano-convex cylindrical lenses, plano-concave cylindrical lenses, spherical lenses, aspheric lenses, prism, filter, achromatic lenses and reflector etc.

*Material:Bk7,fused silica,CaF2,MgF2,BaF2,ZnSe infrared optical crystals. *Focal�length:+/-1% *Length�tolerance:+0.0 - -0.1mm *Width�tolerance:+0.0 - -0.1mm *Center�thickness�tolerance:+/-0.1mm *Surface�Figure:lambda/2 at 633nm on plano side *Surface�quality:60-40�stratch/dig *Clear�Apenture>90% *Chamfer:0.25mm at 45 degree typical *Coating:optional.

Plano-convex lens, aslo called positive lens, is used to converge incident light to a spot on the axis, at a certain distance behind the lens, which is knowed as focal length. It can form both real images and virtual images(for magnifier) on the two sides. The materials to make plano-convex lens can be BK7, Fused Cilica, sapphire and CaF2 etc., for different applications.This model are commonly applied in many devices including telescopes, collimators, magnifiers,optical transceivers, condensers and other optical display or imaging optical systems. AR/NIR or other coatings are available according to the applications. Material-------------------Fused cilica, BK7 Grade A or equivalent optical glasses Design Wavalength------546.1nm Diameter Tolerance------í+0.1mm, í+0.15mm for Dia.í¦75mm Paraxial Focus Length----í+2% Centration----------------85% Surface Figure------------ª-/4 @632.8nm Surface Quality-----------60-40 scratch and dig Coatings-------------------Antireflection coatings or NIR coatings Bevel-----------------------A slight protective bevel, such as 0.25mmí-45íp (For different applications, there are various choices in the specifications, which must be determined according to usersí» specific requirements.) Products include: Achromatic lens Meniscus Lens Double-concave Lens Plano-concave Lens Double-convex Lens Plano-convex Lens Cartons

Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses are manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.

Material:sapphire Size:3mm to 100mm Surface quality:60-40 Fringe:3(1) Tolerance:+0.00/-0.0.2mm.

Material:Germanium Size:3-200mm Surface Quality:40-20 Fringe:3(0.5) Tolerance:+0.00/-0.05 AR BBAR 8-12um.